TMP1827

AKTIV

SHA-256-Authentifikator und 2-Kbit-EEPROM, integrierter Temperatursensor mit ±0,2 Grad Celsius, komp

Produktdetails

Local sensor accuracy (max) 0.2, 0.9 Type Local Operating temperature range (°C) -55 to 150 Supply voltage (min) (V) 1.7 Interface type Single-Wire Supply voltage (max) (V) 5.5 Features 2-kb EEPROM, 64-bit unique ID, GPIO, NIST traceable, SHA-256 Authentication Supply current (max) (µA) 154 Temp resolution (max) (bps) 16 Remote channels (#) 0 Addresses 256 Rating Catalog TI functional safety category Functional Safety-Capable
Local sensor accuracy (max) 0.2, 0.9 Type Local Operating temperature range (°C) -55 to 150 Supply voltage (min) (V) 1.7 Interface type Single-Wire Supply voltage (max) (V) 5.5 Features 2-kb EEPROM, 64-bit unique ID, GPIO, NIST traceable, SHA-256 Authentication Supply current (max) (µA) 154 Temp resolution (max) (bps) 16 Remote channels (#) 0 Addresses 256 Rating Catalog TI functional safety category Functional Safety-Capable
WSON (NGR) 8 6.25 mm² 2.5 x 2.5
  • 1-Wire interface with multi-drop shared bus and cyclic redundancy check (CRC)
  • Bus powered with operating voltage: 1.7V to 5.5V
  • IEC 61000-4-2 ESD for 8-kV contact discharge
  • Functional Safety-Capable
  • High-accuracy digital temperature sensor
    • TMP1827
      • ±0.2°C (maximum) from +10°C to +45°C
      • ±0.3°C (maximum) from –40°C to +105°C
      • ±0.4°C (maximum) from –55°C to +150°C
    • TMP1827N
      • ±0.9°C (maximum) from –55°C to +150°C
  • Temperature measurement current: 94µA
  • Shutdown current: 1.3µA
  • 16-bit temperature resolution: 7.8125 m°C (1 LSB)
  • Fast data rates of 90kbps in overdrive speed
  • Flexible user programmable short address modes for faster device address
  • SHA-256-HMAC authentication scheme
    • FIPS 180-4 compliant Secure Hash Implementation
    • FIPS 198-1 compliant HMAC Implementation
  • 2Kb EEPROM features:
    • Write operation in 64-bit block size
    • Continuous read mode
    • Read with write protection with 256-bit page size
    • Authenticated write protection mode with 256-bit page size
    • Programming current: 178µA
  • NIST traceable factory-programmed non erasable 64-bit identification number for device addressing
  • Four configurable open-drain digital input-output and temperature alert
  • 1-Wire interface with multi-drop shared bus and cyclic redundancy check (CRC)
  • Bus powered with operating voltage: 1.7V to 5.5V
  • IEC 61000-4-2 ESD for 8-kV contact discharge
  • Functional Safety-Capable
  • High-accuracy digital temperature sensor
    • TMP1827
      • ±0.2°C (maximum) from +10°C to +45°C
      • ±0.3°C (maximum) from –40°C to +105°C
      • ±0.4°C (maximum) from –55°C to +150°C
    • TMP1827N
      • ±0.9°C (maximum) from –55°C to +150°C
  • Temperature measurement current: 94µA
  • Shutdown current: 1.3µA
  • 16-bit temperature resolution: 7.8125 m°C (1 LSB)
  • Fast data rates of 90kbps in overdrive speed
  • Flexible user programmable short address modes for faster device address
  • SHA-256-HMAC authentication scheme
    • FIPS 180-4 compliant Secure Hash Implementation
    • FIPS 198-1 compliant HMAC Implementation
  • 2Kb EEPROM features:
    • Write operation in 64-bit block size
    • Continuous read mode
    • Read with write protection with 256-bit page size
    • Authenticated write protection mode with 256-bit page size
    • Programming current: 178µA
  • NIST traceable factory-programmed non erasable 64-bit identification number for device addressing
  • Four configurable open-drain digital input-output and temperature alert

The TMP1827 is a high-accuracy, 1-Wire® compatible digital output temperature sensor with integrated 2Kb EEPROM, SHA-256-HMAC authentication scheme and a wide operating temperature range from –55°C to +150°C. The TMP1827 provides a high accuracy of ±0.1°C (typical)/±0.2°C (maximum) across the temperature range of +10°C to +45°C. Each device comes with a factory programmed 64-bit unique identification number for addressing and NIST traceability. The TMP1827 supports both standard speed for legacy application and overdrive mode with 90-kbps data rate for low latency communication across a wide voltage range of 1.7V to 5.5V.

In the simplest mode of operation, the TMP1827 1-Wire® interface, with an integrated 8kV IEC-61000-4-2 ESD protection on the data pin, requires only a single connection and a ground return in bus powered mode, which simplifies and reduces cost by reducing the number of wires and external protection components. Additionally, there is the VDD power pin also available for applications that need to have a dedicated power supply.

1-Wire® is a registered trademark of Maxim Integrated Products, Inc.

The TMP1827 is a high-accuracy, 1-Wire® compatible digital output temperature sensor with integrated 2Kb EEPROM, SHA-256-HMAC authentication scheme and a wide operating temperature range from –55°C to +150°C. The TMP1827 provides a high accuracy of ±0.1°C (typical)/±0.2°C (maximum) across the temperature range of +10°C to +45°C. Each device comes with a factory programmed 64-bit unique identification number for addressing and NIST traceability. The TMP1827 supports both standard speed for legacy application and overdrive mode with 90-kbps data rate for low latency communication across a wide voltage range of 1.7V to 5.5V.

In the simplest mode of operation, the TMP1827 1-Wire® interface, with an integrated 8kV IEC-61000-4-2 ESD protection on the data pin, requires only a single connection and a ground return in bus powered mode, which simplifies and reduces cost by reducing the number of wires and external protection components. Additionally, there is the VDD power pin also available for applications that need to have a dedicated power supply.

1-Wire® is a registered trademark of Maxim Integrated Products, Inc.

Herunterladen Video mit Transkript ansehen Video

Weitere Informationen anfordern

Dokumentation zur NIST-Kalibrierung ist verfügbar. Jetzt anfordern

Das TMP1827 Sicherheitsprogrammierhandbuch, das Sicherheitstool und die Software sind verfügbar. Jetzt anfordern

Ähnliche Produkte, die für Sie interessant sein könnten

Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung
TMP1826 AKTIV 2 Kbit EEPROM mit integriertem Temperatursensor für ±0,2 C, kompatibel mit 1-Wire®-Protokoll Pin-to-pin, same accuracy temperature sensor, with EEPROM only

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 10
Typ Titel Datum
* Data sheet TMP1827 SHA-256 Authenticator and 2-Kbit EEPROM, With Integrated ±0.2°C Temperature Sensor, Compatible With 1-Wire® Protocol datasheet (Rev. B) PDF | HTML 17 Jan 2025
Product overview NIST Traceability for Temperature and Humidity Sensors PDF | HTML 15 Apr 2025
Application note How to Read and Interpret Digital Temperature Sensor Output Data (Rev. A) PDF | HTML 21 Jan 2025
Application note Implementing Enumeration for 1-Wire® Protocol with TMP1826 and TM4C129x Microcontrollers (Rev. E) PDF | HTML 21 Jan 2025
Application brief Key Generation and Authentication Mechanism for TMP1827 (Rev. A) PDF | HTML 21 Jan 2025
Application brief Replace External Memory for Module Identification With TMP1826 Embedded EEPROM (Rev. A) PDF | HTML 21 Jan 2025
Functional safety information TMP1827 Functional Safety FIT Rate, FMD and Pin FMA (Rev. A) PDF | HTML 30 Mai 2023
Certificate TMP1827EVM EU RoHs Declaration of Conformity (DoC) 21 Dez 2022
Application note Implementing Host Controller for TMP1826 & TMP1827 Single-Wire Temp. Sensor PDF | HTML 03 Nov 2022
EVM User's guide TMP1827EVM User's Guide PDF | HTML 07 Sep 2022

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TMP1827EVM — TMP1827 Evaluierungsmodul für digitalen Temperatursensor mit einzelnem Kabel

Der TMP1827 ist ein hochgenauer, einadriger kompatibler digitaler Ausgangstemperatursensor mit integriertem 256-Bit-Secure-Hash-Algorithmus (SHA) mit Hash-Message-Authentifizierungscode (HMAC) und 2-Kbit-EEPROM. Der TMP1827 bietet eine hohe Genauigkeit von ±0,3 Grad Celsius über den (...)

Benutzerhandbuch: PDF | HTML
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WSON (NGR) 8 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos