Home Energiemanagement Lastschalter

TPS2554

AKTIV

USB-Leistungsschalter, 0,5-2,5 A einstellbar, 2 einstellbare ILIMIT, 4,5-5,5 V, 73 mΩ, Active-High

Produktdetails

Product type Adjustable current limit, Power switch Vin (max) (V) 5.5 Vin (min) (V) 4.5 Rating Catalog Number of channels 1 Operating temperature range (°C) -40 to 125 Current limit accuracy at 1 A 0.1 Enable Active High
Product type Adjustable current limit, Power switch Vin (max) (V) 5.5 Vin (min) (V) 4.5 Rating Catalog Number of channels 1 Operating temperature range (°C) -40 to 125 Current limit accuracy at 1 A 0.1 Enable Active High
VSON (DRC) 10 9 mm² (3 mm × 3 mm)
  • Meets USB Current-Limiting Requirements
  • Adjustable Current Limit, 500 mA to 2.5 A (typ)
  • Two Independently-Settable, Current-Limit Thresholds
  • Fast Overcurrent Response - 1.5 μs (typ)
  • 73-mΩ High-Side MOSFET
  • 3.8-μA Maximum Standby Supply Current
  • PowerPAD™ Thermal Management
  • Automatic Output Discharge when Disabled
  • Both High-Enable (TPS2554) and Low-Enable (TPS2555) Versions Available
  • Meets USB Current-Limiting Requirements
  • Adjustable Current Limit, 500 mA to 2.5 A (typ)
  • Two Independently-Settable, Current-Limit Thresholds
  • Fast Overcurrent Response - 1.5 μs (typ)
  • 73-mΩ High-Side MOSFET
  • 3.8-μA Maximum Standby Supply Current
  • PowerPAD™ Thermal Management
  • Automatic Output Discharge when Disabled
  • Both High-Enable (TPS2554) and Low-Enable (TPS2555) Versions Available
  • The TPS2554/55 power-distribution switches are intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered. These devices offer a programmable current-limit threshold between 500 mA and 2.5 A (typ) via an external resistor.

    TPS2554/55 devices limit the output current to a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. The FAULT logic output asserts low during overcurrent and over-temperature conditions.

    The TPS2554/55 power-distribution switches are intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered. These devices offer a programmable current-limit threshold between 500 mA and 2.5 A (typ) via an external resistor.

    TPS2554/55 devices limit the output current to a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. The FAULT logic output asserts low during overcurrent and over-temperature conditions.

    Herunterladen Video mit Transkript ansehen Video

    Ähnliche Produkte, die für Sie interessant sein könnten

    Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung.
    TPS2555 AKTIV USB-Leistungsschalter, 0,5-2,5 A einstellbar, 2 einstellbare ILIMIT, 4,5-5,5 V, 73 mΩ, Active-Low This product offers the same functionality and pinout with enable active-low.

    Technische Dokumentation

    Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
    Alle anzeigen 3
    Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
    * Datenblatt Precision Adjustable Current-Limited, Power-Distribution Switches datasheet 04.10.2010
    Zertifikat US-39957-UL Certificate of Compliance IEC 62368-1 27.06.2022
    Auswahlhilfe Power Management Guide 2018 (Rev. R) 25.06.2018

    Design und Entwicklung

    Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

    Evaluierungsplatine

    TPS2554EVM-010 — Evaluierungsmodul für den präzisionseinstellbaren, strombegrenzten Leistungsverteilungsschalter TPS2

    The TPS2554EVM-010 is an evaluation module (EVM) for Texas Instruments TPS2554DRC and TPS2555DRC precision adjustable, current-limited power-distribution switches. This EVM operates over a 4.5 V to 5.5 V range. An onboard jumper sets the output current-limit to either 1.2 A or 2.4 A. Test points (...)
    Benutzerhandbuch: PDF
    Unterstützte Produkte und Hardware
    Vorrätig
    Limit:
    ??asset.out-of-stock-ti_de_DE??
    Nicht verfügbar
    Simulationsmodell

    TPS2554 Unencrypted PSpice Transient Model Package (Rev. A)

    SLVM293A.ZIP (31 KB) - PSpice-Modell
    Unterstützte Produkte und Hardware
    Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
    VSON (DRC) 10 Ultra Librarian

    Bestellen & Qualität

    Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

    Support und Schulungen

    TI E2E™-Foren mit technischem Support von TI-Ingenieuren

    Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

    Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

    Videos