Home Energiemanagement DC/DC-Schaltregler DC/DC-Wandler
NEU

TPS6287C50

AKTIV

Parall. schaltb. Abwärtswandler, 6 V, 50 A, mit I2C, Telemetrie, Frequenzsynchron. und Fernerfassung

Produktdetails

Rating Catalog Topology Buck, Multiphase, Step-Down Converter, Synchronous Buck Iout (max) (A) 50 Vin (max) (V) 6 Vin (min) (V) 2.8 Vout (max) (V) 1 Vout (min) (V) 0.4 Switch current limit (typ) (A) 66 Features Adaptive/dynamic voltage scaling, Adjustable soft start, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C, I2C control, I2C interface, I2C support, Light Load Efficiency, Multiphase, Output discharge, Over Current Protection, Phase interleaving, Power good, Soft Start, Soft Start Adjustable, Soft-start adjustable, Spread Spectrum Clocking (SSC), Synchronous Rectification, Telemetry, UVLO, Wettable flanks package EMI features Frequency Dithering, Low parasitic Hotrod packaging, Spread Spectrum Control mode COT, Constant on-time (COT), DCS-Control Operating temperature range (°C) 150 to -40 Duty cycle (max) (%) 65
Rating Catalog Topology Buck, Multiphase, Step-Down Converter, Synchronous Buck Iout (max) (A) 50 Vin (max) (V) 6 Vin (min) (V) 2.8 Vout (max) (V) 1 Vout (min) (V) 0.4 Switch current limit (typ) (A) 66 Features Adaptive/dynamic voltage scaling, Adjustable soft start, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C, I2C control, I2C interface, I2C support, Light Load Efficiency, Multiphase, Output discharge, Over Current Protection, Phase interleaving, Power good, Soft Start, Soft Start Adjustable, Soft-start adjustable, Spread Spectrum Clocking (SSC), Synchronous Rectification, Telemetry, UVLO, Wettable flanks package EMI features Frequency Dithering, Low parasitic Hotrod packaging, Spread Spectrum Control mode COT, Constant on-time (COT), DCS-Control Operating temperature range (°C) 150 to -40 Duty cycle (max) (%) 65
WQFN-FCRLF (VAA) 20 30 mm² 5 x 6
  • Input voltage range: 2.8V to 6V
  • Output voltage accuracy: ±0.5%
  • Output voltage range from 0.4V to 1.0V
  • Internal power MOSFETs: 1.8mΩ and 0.7mΩ
  • External compensation
  • Optional stacked operation for increased output current capability
  • Adjustable switching frequency from 833kHz to 3MHz
  • External synchronization
  • Forced PWM or power save mode operation
  • Optimized load transient operation
  • Fixed frequency DCS-Control
  • Transient non-synchronous mode
  • Adjustable droop compensation
  • Optimized for small and low-profile inductors
  • I2C-compatible interface with up to 3.4MHz
  • Differential remote sense
  • Thermal pre-warning and thermal shutdown
  • Input and output overvoltage protection
  • Output discharge
  • Optional spread spectrum clocking
  • Telemetry for VIN, Temp, VOUT, and IOUT
  • Interrupt output
  • Power-good output with window comparator with adjustable thresholds
  • Available in 5.0mm × 6.0mm, VQFN package
  • Input voltage range: 2.8V to 6V
  • Output voltage accuracy: ±0.5%
  • Output voltage range from 0.4V to 1.0V
  • Internal power MOSFETs: 1.8mΩ and 0.7mΩ
  • External compensation
  • Optional stacked operation for increased output current capability
  • Adjustable switching frequency from 833kHz to 3MHz
  • External synchronization
  • Forced PWM or power save mode operation
  • Optimized load transient operation
  • Fixed frequency DCS-Control
  • Transient non-synchronous mode
  • Adjustable droop compensation
  • Optimized for small and low-profile inductors
  • I2C-compatible interface with up to 3.4MHz
  • Differential remote sense
  • Thermal pre-warning and thermal shutdown
  • Input and output overvoltage protection
  • Output discharge
  • Optional spread spectrum clocking
  • Telemetry for VIN, Temp, VOUT, and IOUT
  • Interrupt output
  • Power-good output with window comparator with adjustable thresholds
  • Available in 5.0mm × 6.0mm, VQFN package

The TPS6287Cxx devices are a family of pin-to-pin, up to 50A synchronous step-down DC/DC converters with I2C interface and differential remote sense. Low-resistance power switches allow up to 50A continuous output current at high ambient temperatures. The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices. In stacked operation, the converters frequencies are synchronized, share a common compensation signal and shift the phases to supply loads with several hundreds of amperes. The TPS6287Cxx family implements a fixed-frequency-DCS-Control scheme with adjustable switching frequency and adjustable loop compensation. The high switching frequency and loop bandwidth is optimized for low-profile- and small-size inductors and low output capacitance. Devices can operate in power-save mode (PSM) for maximum efficiency, or forced-PWM mode for best transient performance and lowest output voltage ripple. The I2C compatible interface offers several control, monitoring, and warning features including telemetry data of input voltage, output voltage, output current, and temperature. Four SET pins can be used to program default settings before start-up.

The TPS6287Cxx devices are a family of pin-to-pin, up to 50A synchronous step-down DC/DC converters with I2C interface and differential remote sense. Low-resistance power switches allow up to 50A continuous output current at high ambient temperatures. The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices. In stacked operation, the converters frequencies are synchronized, share a common compensation signal and shift the phases to supply loads with several hundreds of amperes. The TPS6287Cxx family implements a fixed-frequency-DCS-Control scheme with adjustable switching frequency and adjustable loop compensation. The high switching frequency and loop bandwidth is optimized for low-profile- and small-size inductors and low output capacitance. Devices can operate in power-save mode (PSM) for maximum efficiency, or forced-PWM mode for best transient performance and lowest output voltage ripple. The I2C compatible interface offers several control, monitoring, and warning features including telemetry data of input voltage, output voltage, output current, and temperature. Four SET pins can be used to program default settings before start-up.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet TPS6287Cxx 2.8V to 6V Input, up to 50A, Stackable Step-Down Converters With I²C Interface and Telemetry datasheet PDF | HTML 25 Mär 2026

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS62893EVM-012 — TPS62893-Abwärtswandler-Evaluierungsmodul

Das TPS62893EVM-012 unterstützt den Benutzer bei der Evaluierung und Prüfung des Betriebs und der Funktionalität von TPS62893-Abwärtswandlern. Das Evaluierungsmodul (EVM) kann auch dazu verwendet werden, die Bausteine TPS62891-Q1 und TPS62892-Q1 in dieser Konfiguration zu evaluieren. Das EVM (...)
Benutzerhandbuch: PDF | HTML
Evaluierungsplatine

TPS62893EVM-013 — TPS62893 – Evaluierungsmodul

Das TPS62893EVM-013 unterstützt Benutzende bei der einfachen Evaluierung und Prüfung des Betriebs und der Funktionalität des Abwärts-/Aufwärtswandlers TPS62893. Das EVM kann auch dazu verwendet werden, die Bausteine TPS62891-Q1 und TPS62892-Q1 in dieser Konfiguration zu evaluieren. Das EVM wandelt (...)
Benutzerhandbuch: PDF | HTML
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN-FCRLF (VAA) 20 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos