Home Energiemanagement DC/DC-Schaltregler DC/DC-Controller
Home
Energiemanagement
DC/DC-Schaltregler
DC/DC-Controller
NEU

TPS7H5101-SEP

VORSCHAU
Jetzt bestellen
Datenblatt

TPS7H5101-SEP

VORSCHAU
Datenblatt Jetzt bestellen

Produktdetails

Rating Space Topology Buck, Multiphase Vin (max) (V) 16 Vin (min) (V) -0.3 Vout (max) (V) 2.75 Vout (min) (V) 0 Control mode D-CAP+ Features Adjustable current limit, Differential Remote Sense, PMBus, Power good, Voltage Margining Iq (typ) (A) 0.006 Number of phases 2 Operating temperature range (°C) -55 to 125
Rating Space Topology Buck, Multiphase Vin (max) (V) 16 Vin (min) (V) -0.3 Vout (max) (V) 2.75 Vout (min) (V) 0 Control mode D-CAP+ Features Adjustable current limit, Differential Remote Sense, PMBus, Power good, Voltage Margining Iq (typ) (A) 0.006 Number of phases 2 Operating temperature range (°C) -55 to 125
TSSOP (DBT) 30 49.92 mm² (7.8 mm × 6.4 mm)
  • Total ionizing dose (TID) characterized up to 50krad(Si)
  • Single-Event Effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 43MeV-cm2/mg
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 43MeV-cm2/mg
  • D-CAP+ control and droop regulation for optimal load response
  • Single or dual phase operation with single device
  • Support for DrMOS and GaN power stages
  • 0.5V to 2.5V nominal output voltage
  • ±1% reference voltage accuracy
  • Differential remote sensing
  • Configurable switching frequency from 200kHz to 800kHz
  • PMBus interface at 100kHz to support:
    • ±10% voltage margining
    • On and off command
    • Packet error checking (PEC) for robust SET performance
  • Available in military temperature range (–55°C to 125°C)
  • Package is outgas tested per ASTM E595
  • Total ionizing dose (TID) characterized up to 50krad(Si)
  • Single-Event Effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 43MeV-cm2/mg
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 43MeV-cm2/mg
  • D-CAP+ control and droop regulation for optimal load response
  • Single or dual phase operation with single device
  • Support for DrMOS and GaN power stages
  • 0.5V to 2.5V nominal output voltage
  • ±1% reference voltage accuracy
  • Differential remote sensing
  • Configurable switching frequency from 200kHz to 800kHz
  • PMBus interface at 100kHz to support:
    • ±10% voltage margining
    • On and off command
    • Packet error checking (PEC) for robust SET performance
  • Available in military temperature range (–55°C to 125°C)
  • Package is outgas tested per ASTM E595

The TPS7H5101 is a dual phase D-CAP+ buck controller. The controller is optimized for high current, point of load power delivery due to the advanced control features of the D-CAP+ architecture which support a fast transient response with low output capacitance and high efficiency. The output capacitance can further be minimized through both the use of droop regulation and by utilizing the configurable undershoot reduction (USR) feature.

Single or dual phase operation is possible with a single controller, thereby enabling power stage optimization for different current levels.

Multiple configuration options are possible with this controller. PMBus provides the option to enable or disable the controller along with dynamically change the output voltage ±10% (voltage margining). Additional features include differential remote sensing for accurate voltage regulation and configurable compensation for an optimized control loop.

The TPS7H5101 is a dual phase D-CAP+ buck controller. The controller is optimized for high current, point of load power delivery due to the advanced control features of the D-CAP+ architecture which support a fast transient response with low output capacitance and high efficiency. The output capacitance can further be minimized through both the use of droop regulation and by utilizing the configurable undershoot reduction (USR) feature.

Single or dual phase operation is possible with a single controller, thereby enabling power stage optimization for different current levels.

Multiple configuration options are possible with this controller. PMBus provides the option to enable or disable the controller along with dynamically change the output voltage ±10% (voltage margining). Additional features include differential remote sensing for accurate voltage regulation and configurable compensation for an optimized control loop.
filter Andere DC/DC-Controller suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS7H5101-SEP Radiation-Tolerant Dual Phase D-CAP+ Controller datasheet PDF | HTML 18.09.2026

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS7H5101EVM — TPS7H5101-SEP – Evaluierungsmodul

Das TPS7H5101-SEP-Evaluierungsmodul (EVM) ist ein zweiphasiger D-CAP+™-Abwärtswandler, der für Hochstromlasten bei niedrigen Ausgangsspannungen ausgelegt ist. Der Controller ist für 80 A bei 0,8 V für die Point-of-Load-Stromversorgung optimiert und verwendet zwei TPS7H6200-SEP-Bausteine zur (...)

Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Zertifizierung

TPS7H5101EVM-DOC-CERT — EU-Konformitätserklärung für TPS7H5101EVM

TPS7H5101EVM EU Declaration of Conformity (DoC)
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
TSSOP (DBT) 30 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos