Home Energiemanagement LED-Treiber Kfz-LED-Treiber
Home
Energiemanagement
LED-Treiber
Kfz-LED-Treiber
NEU

TPS92761-Q1

AKTIV

36-V-Abwärtsregle für die Automobilindustrie mit 24-Kanal-LED-Matrix-Manager für animierte Außenb

Jetzt bestellen
Datenblatt

TPS92761-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of channels 24 Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 5 Vin (max) (V) 36 Vout (min) (V) 0 Vout (max) (V) 20 Iout (max) (A) 2 Features EEPROM, Fault Diagnostic, Integrated buck converter, PWM Dimming, Spread Spectrum, UART
Number of channels 24 Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 5 Vin (max) (V) 36 Vout (min) (V) 0 Vout (max) (V) 20 Iout (max) (A) 2 Features EEPROM, Fault Diagnostic, Integrated buck converter, PWM Dimming, Spread Spectrum, UART
HTQFP (PHP) 48 81 mm² (9 mm × 9 mm)
  • AEC-Q100 qualified for automotive applications
    • Grade 1: -40°C to 125°C ambient operating temperature
  • Functional safety targeted
    • Developed for functional safety applications
    • Documentation to aid ISO26262 system design up to ASIL B
  • 24 constant current sinks with high precision:
    • 20V maximum voltage capability
    • Up to 90mA channel current set by resistor
    • Low dropout voltage: 400mV (typ) at 90mA
  • Flexible dimming control:
    • 6-bit independent current setting
    • 14-bit independent PWM dimming with phase-shift control
    • Programmable slew-rate control
  • Integrated synchronous buck regulator
    • Wide input voltage range: 5V to 36V
    • Supports 400kHz and 2.1MHz switching frequency
    • Spread spectrum frequency modulation
    • Dynamic headroom voltage control (DHC)
  • UART serial communication
    • Support for up to 2MHz clock frequency
    • Internal oscillator for system clock
    • CAN transceiver compatible
  • Internal EEPROM
    • Failsafe default settings
    • Customer calibration data
  • Extensive fault diagnostics
  • AEC-Q100 qualified for automotive applications
    • Grade 1: -40°C to 125°C ambient operating temperature
  • Functional safety targeted
    • Developed for functional safety applications
    • Documentation to aid ISO26262 system design up to ASIL B
  • 24 constant current sinks with high precision:
    • 20V maximum voltage capability
    • Up to 90mA channel current set by resistor
    • Low dropout voltage: 400mV (typ) at 90mA
  • Flexible dimming control:
    • 6-bit independent current setting
    • 14-bit independent PWM dimming with phase-shift control
    • Programmable slew-rate control
  • Integrated synchronous buck regulator
    • Wide input voltage range: 5V to 36V
    • Supports 400kHz and 2.1MHz switching frequency
    • Spread spectrum frequency modulation
    • Dynamic headroom voltage control (DHC)
  • UART serial communication
    • Support for up to 2MHz clock frequency
    • Internal oscillator for system clock
    • CAN transceiver compatible
  • Internal EEPROM
    • Failsafe default settings
    • Customer calibration data
  • Extensive fault diagnostics

The TPS92761-Q1 is a 24 channel device with an integrated synchronous Buck regulator and protected linear current sinks. The device is capable of driving current up to 90mA through LEDs with channel-to-channel accuracy of less than ±3.5%. Each linear current sink can be individually programmed by a 6-bit current setting value and is independently controlled by pulse width modulation (PWM) using 14-bit registers. Transient behavior is improved by programming uniform phase shifted PWM signals between operating channels.

The LEDs can be powered by the voltage rail generated using the wide 5V to 36V input voltage range integrated synchronous Buck regulator. The buck regulator implements an adaptive off-time current mode control enabling low input voltage operation. The device is capable of providing 2.68A current at 2.1MHz switching frequency and 4A current at 400kHz switching frequency with fast transient response. Dynamic headroom control is implemented to optimize system efficiency and reduce thermal dissipation.

The TPS92761-Q1 features an internal oscillator that supports multidrop, universal asynchronous receiver transmitter (UART) serial interface. The internal EEPROM can store system defaults as well as calibration and lighting module data. An on-board ADC with multiplexed inputs samples all LED channels as well as IC die temperature and supply voltages.

The TPS92761-Q1 is a 24 channel device with an integrated synchronous Buck regulator and protected linear current sinks. The device is capable of driving current up to 90mA through LEDs with channel-to-channel accuracy of less than ±3.5%. Each linear current sink can be individually programmed by a 6-bit current setting value and is independently controlled by pulse width modulation (PWM) using 14-bit registers. Transient behavior is improved by programming uniform phase shifted PWM signals between operating channels.

The LEDs can be powered by the voltage rail generated using the wide 5V to 36V input voltage range integrated synchronous Buck regulator. The buck regulator implements an adaptive off-time current mode control enabling low input voltage operation. The device is capable of providing 2.68A current at 2.1MHz switching frequency and 4A current at 400kHz switching frequency with fast transient response. Dynamic headroom control is implemented to optimize system efficiency and reduce thermal dissipation.

The TPS92761-Q1 features an internal oscillator that supports multidrop, universal asynchronous receiver transmitter (UART) serial interface. The internal EEPROM can store system defaults as well as calibration and lighting module data. An on-board ADC with multiplexed inputs samples all LED channels as well as IC die temperature and supply voltages.

filter Andere Kfz-LED-Treiber suchen
Herunterladen Video mit Transkript ansehen Video

Weitere Informationen anfordern

Das vollständige Datenblatt und weitere Informationen sind verfügbar. Jetzt anfordern

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS92761-Q1 Automotive Constant Voltage Buck with 24-Channel Linear LED Driver datasheet PDF | HTML 09.06.2026

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS92761EVM — TPS92761 – Evaluierungsmodul

Der TPS92761-Q1 ist ein 24-Kanal-Baustein mit integriertem synchronen Abwärtsregler und geschützten linearen Stromsenken. Der Baustein ist in der Lage, Strom von bis zu 90 mA durch LEDs mit einer Kanal-zu-Kanal-Genauigkeit von weniger als ±3,5 % zu treiben. Jede lineare Stromsenke kann einzeln über (...)

Unterstützte Produkte und Hardware
Designtool

TPS9276X-DESIGN — TPS9276X design resources

TPS9276X design resources
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTQFP (PHP) 48 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos