Startseite Energiemanagement DC/DC power modules Power modules (integrated inductor)
Startseite
Energiemanagement
DC/DC power modules
Power modules (integrated inductor)

TPSM41615

AKTIV

Stapelbares Stromversorgungsmodul mit 4 V bis 16 V und 15 A

Jetzt bestellen
Datenblatt

Eine neuere Version dieses Produkts ist verfügbar

open-in-new Alternativen vergleichen
Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
NEU TPSM843A26 AKTIV Synchroner SWIFT™-Abwärtswandler-Stromversorgungsmodul, 4 bis 18 V Eingangsspannung, 16 A, erweitert Higher switching frequency in a smaller, overmolded package

TPSM41615

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Iout (max) (A) 15 Vin (max) (V) 16 Vin (min) (V) 4 Vout (max) (V) 7.1 Vout (min) (V) 0.6 Rating Catalog Operating temperature range (°C) -40 to 125 Topology Synchronous Buck Features Adjustable current limit, Current Sharing, EMI Tested, Enable, Frequency synchronization, Phase Interleaving, Power good, Remote Sense Control mode ACM Switching frequency (max) (Hz) 1000000 Switching frequency (min) (Hz) 300000
Iout (max) (A) 15 Vin (max) (V) 16 Vin (min) (V) 4 Vout (max) (V) 7.1 Vout (min) (V) 0.6 Rating Catalog Operating temperature range (°C) -40 to 125 Topology Synchronous Buck Features Adjustable current limit, Current Sharing, EMI Tested, Enable, Frequency synchronization, Phase Interleaving, Power good, Remote Sense Control mode ACM Switching frequency (max) (Hz) 1000000 Switching frequency (min) (Hz) 300000
QFM (MOV) 69 176 mm² 16 x 11
  • Integrated inductor power solution
  • 11-mm × 16-mm × 4.2-mm QFN package
    • All pins accessible from package perimeter
  • Input voltage range: 4 V to 16 V
  • Wide-output voltage range: 0.6 V to 7.1 V
  • Selectable internal reference (±0.5% accuracy)
  • Stackable up to two devices
    • Parallel outputs for higher current
    • Phase-interleaving for reduced ripple
  • Efficiencies up to 97%
  • Adjustable fixed switching frequency (300 kHz to 1 MHz)
  • Allows synchronization to an external clock
  • Advanced current mode provides ultra-fast load step response
  • Power-good output
  • Meets EN55011 radiated EMI limits
  • Operating ambient range: –40°C to +105°C
  • Operating IC junction range: –40°C to +125°C
  • Pin compatible with: 25-A TPSM41625
  • Create a custom design using the TPSM41615 With the WEBENCH Power Designer
  • Integrated inductor power solution
  • 11-mm × 16-mm × 4.2-mm QFN package
    • All pins accessible from package perimeter
  • Input voltage range: 4 V to 16 V
  • Wide-output voltage range: 0.6 V to 7.1 V
  • Selectable internal reference (±0.5% accuracy)
  • Stackable up to two devices
    • Parallel outputs for higher current
    • Phase-interleaving for reduced ripple
  • Efficiencies up to 97%
  • Adjustable fixed switching frequency (300 kHz to 1 MHz)
  • Allows synchronization to an external clock
  • Advanced current mode provides ultra-fast load step response
  • Power-good output
  • Meets EN55011 radiated EMI limits
  • Operating ambient range: –40°C to +105°C
  • Operating IC junction range: –40°C to +125°C
  • Pin compatible with: 25-A TPSM41625
  • Create a custom design using the TPSM41615 With the WEBENCH Power Designer

The TPSM41615 power module is an easy-to-use integrated power supply that combines a DC/DC converter with power MOSFETs, a shielded inductor, and passives into a compact QFN package. This power solution requires few external components while maintaining the ability to adjust key parameters to meet specific design requirements. Applications requiring increased current can benefit from the ability to parallel two TPSM41615 devices.

The 11-mm × 16-mm × 4.2-mm, 69-pin QFN package with optimal package layout has excellent power dissipation capability which enhances thermal performance. The package footprint has all signal pins accessible from the perimeter and large thermal pads beneath the device. The TPSM41615 offers flexibilty with many features including power good signal, clock synchronization, programmable UVLO, soft-start timing selection, prebias start-up, as well as overcurrent and overtemperature protection making it a great product for powering a wide range of devices and systems.

space

space

space

The TPSM41615 power module is an easy-to-use integrated power supply that combines a DC/DC converter with power MOSFETs, a shielded inductor, and passives into a compact QFN package. This power solution requires few external components while maintaining the ability to adjust key parameters to meet specific design requirements. Applications requiring increased current can benefit from the ability to parallel two TPSM41615 devices.

The 11-mm × 16-mm × 4.2-mm, 69-pin QFN package with optimal package layout has excellent power dissipation capability which enhances thermal performance. The package footprint has all signal pins accessible from the perimeter and large thermal pads beneath the device. The TPSM41615 offers flexibilty with many features including power good signal, clock synchronization, programmable UVLO, soft-start timing selection, prebias start-up, as well as overcurrent and overtemperature protection making it a great product for powering a wide range of devices and systems.

space

space

space
open-in-new Andere Power modules (integrated inductor) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 5
Typ Titel Datum
* Data sheet TPSM41615 4-V to 16-V Input, 15-A DC/DC Power Module with Current Sharing datasheet (Rev. A) PDF | HTML 03 Dez 2020
EVM User's guide TPSM416x5 Power Module Evaluation Module User's Guide (Rev. B) PDF | HTML 06 Mai 2021
Application note Non-Isolated Point-of-Load Solutions for Tiger Lake in PC Applications (Rev. B) PDF | HTML 29 Apr 2021
Technical article 3 ways to reduce power-supply noise with power modules PDF | HTML 15 Dez 2020
Certificate TPSM41615EVM EU Declaration of Conformity (DoC) 04 Aug 2020

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPSM41615EVM — Stromversorgungsmodulevaluierungsboard, 4 bis 16 V Eingang, 0,6 bis 7,1 V Ausgang, 15-A

The TPSM41615 evaluation board (EVM) is configured to evaluate the operation of the TPSM41615 power module for current up to 15 A. The input voltage range is 4 V to 16 V. The output voltage range is 0.6 V to 7.1 V. The evaluation board makes it easy to evaluate the TPSM41615 operation.
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Simulationsmodell

TPSM41615 PSpice Transient Model

SLVMDF1.ZIP (525 KB) - PSpice Model
Herunterladen
Gehäuse Pins Herunterladen
QFM (MOV) 69 Optionen anzeigen
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos