Home Energiemanagement DC/DC-Spannungsversorgungsmodul Stromversorgungsmodule (integrierter Induktor)
NEU

TPSM8287B15

AKTIV

Parallel schaltbares DC/DC-Abwärtswandlermodul, 6 V, 15 A, I2C, Frequenzsync, MagPack-Technologie

Produktdetails

Rating Catalog Topology Buck, Multiphase, Step-Down Converter, Synchronous Buck Iout (max) (A) 15 Vin (max) (V) 6 Vin (min) (V) 2.7 Vout (max) (V) 1.675 Vout (min) (V) 0.4 Features Adjustable soft start, Current Sharing, Differential Remote Sense, Differential Voltage sensing, EMI Tested, Enable, Frequency Dithering, Frequency synchronization, I2C control, I2C interface, I2C support, I2C/PMBus, Light Load Efficiency, MagPack technology, Multiphase, Output discharge, Overcurrent protection, Phase Interleaving, Power good, Remote Sense, Remote Sensing, Soft Start Adjustable, Soft-start adjustable, Spread-spectrum frequency dithering EMI features Fixed-frequency control, Integrated capacitors, Low parasitic packaging, Mitigated interference & noise technology – architecture 2 (MINT 2), Pinout optimization, Spread Spectrum Operating temperature range (°C) -40 to 125 Switch current limit (typ) (A) 22.5 Type Converter (Integrated Switch), DC/DC converter, Module Duty cycle (max) (%) 75 Control mode COT, Constant on-time (COT), DCS-Control Switching frequency (min) (kHz) 1200 Switching frequency (max) (kHz) 1800
Rating Catalog Topology Buck, Multiphase, Step-Down Converter, Synchronous Buck Iout (max) (A) 15 Vin (max) (V) 6 Vin (min) (V) 2.7 Vout (max) (V) 1.675 Vout (min) (V) 0.4 Features Adjustable soft start, Current Sharing, Differential Remote Sense, Differential Voltage sensing, EMI Tested, Enable, Frequency Dithering, Frequency synchronization, I2C control, I2C interface, I2C support, I2C/PMBus, Light Load Efficiency, MagPack technology, Multiphase, Output discharge, Overcurrent protection, Phase Interleaving, Power good, Remote Sense, Remote Sensing, Soft Start Adjustable, Soft-start adjustable, Spread-spectrum frequency dithering EMI features Fixed-frequency control, Integrated capacitors, Low parasitic packaging, Mitigated interference & noise technology – architecture 2 (MINT 2), Pinout optimization, Spread Spectrum Operating temperature range (°C) -40 to 125 Switch current limit (typ) (A) 22.5 Type Converter (Integrated Switch), DC/DC converter, Module Duty cycle (max) (%) 75 Control mode COT, Constant on-time (COT), DCS-Control Switching frequency (min) (kHz) 1200 Switching frequency (max) (kHz) 1800
QFN-FCMOD (VCH) 37 30 mm² (8 mm × 3.75 mm)
  • ±0.8% output voltage accuracy
  • Differential remote sensing
  • Parallelable for multiphase operation
  • Start-up output voltage and I2C addresses selectable through VSETx pins:
    • 0.4V to 0.775V in 25mV steps
    • 0.8V to 1.55V in 50mV steps
  • Output voltage I2C adjustable in 1.25mV steps
  • Adjustable external compensation for wide output capacitor range and optimized transient response
  • Designed for low EMI requirements
    • MagPack technology shields inductor and IC
    • No bond wire package
    • Optional internal input and output capacitors
    • Simplified layout through parallel input path
    • Optional synchronization to external clock or spread-spectrum operation
  • Optional droop compensation through I2C

  • Power save mode or forced PWM operation
  • Precise enable input threshold
  • Power-good output with window comparator
  • Active output discharge
  • Excellent thermal performance
  • –40°C to 125°C operating temperature range
  • 3.75mm × 8.0mm QFN package with 0.5mm pitch
  • 66mm2 design size
  • ±0.8% output voltage accuracy
  • Differential remote sensing
  • Parallelable for multiphase operation
  • Start-up output voltage and I2C addresses selectable through VSETx pins:
    • 0.4V to 0.775V in 25mV steps
    • 0.8V to 1.55V in 50mV steps
  • Output voltage I2C adjustable in 1.25mV steps
  • Adjustable external compensation for wide output capacitor range and optimized transient response
  • Designed for low EMI requirements
    • MagPack technology shields inductor and IC
    • No bond wire package
    • Optional internal input and output capacitors
    • Simplified layout through parallel input path
    • Optional synchronization to external clock or spread-spectrum operation
  • Optional droop compensation through I2C

  • Power save mode or forced PWM operation
  • Precise enable input threshold
  • Power-good output with window comparator
  • Active output discharge
  • Excellent thermal performance
  • –40°C to 125°C operating temperature range
  • 3.75mm × 8.0mm QFN package with 0.5mm pitch
  • 66mm2 design size

The TPSM8287Bxx is a family of pin-to-pin, step-down, DC/DC power modules with differential remote sensing and I2C interface. The power modules use TI’s MagPack technology to integrate a synchronous step-down converter, an inductor, input and output capacitors to simplify design, reduce external components and save PCB area. The low-profile and compact design is designed for assembly by standard surface mount equipment. The TPSM8287Bxx family implements an enhanced control scheme that supports fast transients. The TPSM8287Bxx can operate in fixed-frequency or power save mode. The remote sensing feature optimizes voltage regulation at the point-of-load and the device achieves ±0.8% DC voltage accuracy over the entire temperature range. The devices can operate in stacked, paralleled mode to deliver higher output currents or to spread the power dissipation across multiple devices. The I2C-compatible interface offers several control, monitoring, and warning features. The start-up voltage is selectable through the VSETx pins to allow a power-up without an active I2C communication.

The TPSM8287Bxx is a family of pin-to-pin, step-down, DC/DC power modules with differential remote sensing and I2C interface. The power modules use TI’s MagPack technology to integrate a synchronous step-down converter, an inductor, input and output capacitors to simplify design, reduce external components and save PCB area. The low-profile and compact design is designed for assembly by standard surface mount equipment. The TPSM8287Bxx family implements an enhanced control scheme that supports fast transients. The TPSM8287Bxx can operate in fixed-frequency or power save mode. The remote sensing feature optimizes voltage regulation at the point-of-load and the device achieves ±0.8% DC voltage accuracy over the entire temperature range. The devices can operate in stacked, paralleled mode to deliver higher output currents or to spread the power dissipation across multiple devices. The I2C-compatible interface offers several control, monitoring, and warning features. The start-up voltage is selectable through the VSETx pins to allow a power-up without an active I2C communication.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 17
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPSM8287Bxx 2.7V to 6V Input, 15A, 20A, 25A, and 30A, Parallelable, Step-Down Power Module With I2 C Interface and Remote Sense in a MagPack Package datasheet (Rev. A) PDF | HTML 10.12.2025
Application brief Increasing Further Data Rates Using High-Current Power Converters in Optical Modules PDF | HTML 26.09.2024
Analog Design Journal Fixed-frequency DCS-Control: Fast transient response with clock synchronization PDF | HTML 12.02.2024
Anwendungshinweis QFN and SON PCB Attachment (Rev. C) PDF | HTML 06.12.2023
Anwendungshinweis Benefiting from Step-Down Converters with an I2C Communication Interface (Rev. B) PDF | HTML 29.11.2023
Anwendungshinweis Adjusting the Output Voltage of a Fixed Output Voltage DC-DC Converter PDF | HTML 22.12.2022
Anwendungshinweis Intro to Multi-Function Pins and Their Applications in TI Step-Down Converters (Rev. A) PDF | HTML 17.11.2022
Anwendungshinweis Understanding SOA Curves to Operate at High Output Currents and Temperature PDF | HTML 05.05.2022
Anwendungshinweis Loop Gain Reconstruction of a Step-Down Converter from Output Impedance PDF | HTML 20.01.2022
Anwendungshinweis How to Measure Impedance of a Power Distribution Network of a DC-DC Converter PDF | HTML 20.01.2022
Whitepaper Enabling Higher Data Rates for Optical Modules With Small and Efficient Power PDF | HTML 22.03.2021
Whitepaper Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 14.10.2019
Analog Design Journal Methods of output-voltage adjustment for DC/DC converters 14.06.2019
Analog Design Journal Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 24.10.2017
Anwendungshinweis Basic Calculation of a Buck Converter's Power Stage (Rev. B) PDF | HTML 17.08.2015
Analog Design Journal High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions 25.07.2013
Anwendungshinweis Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 19.09.2011

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPSM8287B30LAPEVM — TPSM8287B30 – Evaluierungsmodul

Das TPSM8287B30-Evaluierungsmodul (EVM) erleichtert die Evaluierung des TPSM8287B30. Der Baustein unterstützt bis zu 30 A Laststrom in einem Pin-zu-Pin-kompatiblen Abwärtsleistungsmodul mit I2C-Schnittstelle, Fernerfassung und Frequenzsynchronisierung in einem 3,75 mm x 8 mm großen (...)
Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
GUI für Evaluierungsmodul (EVM)

TPSM8287B-EVM-GUI — TPSM8287B EVM GUI

The TPSM8287B EVM GUI interfaces with the TPSM8287Bxx EVMs via the USB2ANY adaptor to read and write to the device's I2C registers.
Unterstützte Produkte und Hardware
Berechnungstool

TPSM8287B-CALC — TPSM8287B Komponentenrechner

TPSM8287B component calculator
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
QFN-FCMOD (VCH) 37 Ultra Librarian

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos