Home Energiemanagement Gate-Treiber Low-Side-Treiber

UCC27525

AKTIV

5-A/5-A-Zweikanal-Gate-Treiber mit 5-V-UVLO, Aktivierung und invertierenden/nicht-invertierenden Ein

Produktdetails

Number of channels 2 Power switch GaNFET, IGBT, MOSFET Peak output current (A) 5 Input supply voltage (min) (V) 4.5 Input supply voltage (max) (V) 18 Features Enable pin Operating temperature range (°C) -40 to 140 Rise time (ns) 7 Fall time (ns) 6 Propagation delay time (µs) 0.013 Input threshold CMOS, TTL Channel input logic Inverting, Non-Inverting Input negative voltage (V) 0 Rating Catalog Undervoltage lockout (typ) (V) 4 Driver configuration Inverting, Non-Inverting
Number of channels 2 Power switch GaNFET, IGBT, MOSFET Peak output current (A) 5 Input supply voltage (min) (V) 4.5 Input supply voltage (max) (V) 18 Features Enable pin Operating temperature range (°C) -40 to 140 Rise time (ns) 7 Fall time (ns) 6 Propagation delay time (µs) 0.013 Input threshold CMOS, TTL Channel input logic Inverting, Non-Inverting Input negative voltage (V) 0 Rating Catalog Undervoltage lockout (typ) (V) 4 Driver configuration Inverting, Non-Inverting
HVSSOP (DGN) 8 14.7 mm² (3 mm × 4.9 mm) SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm) WSON (DSD) 8 9 mm² (3 mm × 3 mm)
  • Industry-standard pinout
  • Two independent gate-drive channels
  • 5A peak source and sink-drive current
  • Independent-enable function for each output
  • TTL and CMOS compatible logic threshold independent of supply voltage
  • Hysteretic-logic thresholds for high noise immunity
  • Inputs and enable pin-voltage levels not restricted by VDD pin bias supply voltage
  • 4.5V to 18V single-supply range
  • Outputs held low during VDD-UVLO, (ensures glitch-free operation at power up and power down)
  • Fast propagation delays (13ns typical)
  • Fast rise and fall times (7ns and 6ns typical)
  • 1ns typical delay matching between two channels
  • Two outputs are in parallel for higher drive current
  • Outputs held low when inputs floating
  • PDIP (8), SOIC (8), MSOP (8) PowerPAD™ and 3mm × 3mm WSON-8 package options
  • Operating temperature range of –40°C to 140°C
  • Industry-standard pinout
  • Two independent gate-drive channels
  • 5A peak source and sink-drive current
  • Independent-enable function for each output
  • TTL and CMOS compatible logic threshold independent of supply voltage
  • Hysteretic-logic thresholds for high noise immunity
  • Inputs and enable pin-voltage levels not restricted by VDD pin bias supply voltage
  • 4.5V to 18V single-supply range
  • Outputs held low during VDD-UVLO, (ensures glitch-free operation at power up and power down)
  • Fast propagation delays (13ns typical)
  • Fast rise and fall times (7ns and 6ns typical)
  • 1ns typical delay matching between two channels
  • Two outputs are in parallel for higher drive current
  • Outputs held low when inputs floating
  • PDIP (8), SOIC (8), MSOP (8) PowerPAD™ and 3mm × 3mm WSON-8 package options
  • Operating temperature range of –40°C to 140°C

The UCC2752x family of devices are dual-channel, high-speed, low-side gate-driver devices capable of effectively driving MOSFET and IGBT power switches. Using a design that inherently minimizes shoot-through current, UCC2752x can deliver high-peak current pulses of up to 5A source and 5A sink into capacitive loads along with rail-to-rail drive capability and extremely small propagation delay (typically 13ns). In addition, the drivers feature matched internal propagation delays between the two channels. These delays are very well suited for applications requiring dual-gate drives with critical timing, such as synchronous rectifiers. This also enables connecting two channels in parallel to effectively increase current-drive capability or driving two switches in parallel with one input signal. The input pin thresholds are based on TTL and CMOS compatible low-voltage logic, which is fixed and independent of the VDD supply voltage. Wide hysteresis between the high and low thresholds offers excellent noise immunity.

The UCC2752x family provides the combination of three standard logic options — dual inverting, dual noninverting, one inverting and one noninverting driver. The UCC27526 features a dual input design which offers flexibility of both inverting (IN– pin) and non-inverting (IN+ pin) configuration for each channel. Either IN+ or IN– pin controls the state of the driver output. The unused input pin is used for enable and disable functions. For safety purpose, internal pullup and pulldown resistors on the input pins of all the devices in UCC2752x family ensure that outputs are held LOW when input pins are in floating condition. The UCC27523 and UCC27525 devices feature Enable pins (ENA and ENB) to have better control of the operation of the driver applications. The pins are internally pulled up to VDD for active-high logic and are left open for standard operation.

The UCC2752x family of devices are available in SOIC-8 (D), MSOP-8 with exposed pad (DGN) and 3mm × 3mm WSON-8 with exposed pad (DSD) packages. The UCC27526 is only offered in a 3mm × 3mm WSON (DSD) package.

The UCC2752x family of devices are dual-channel, high-speed, low-side gate-driver devices capable of effectively driving MOSFET and IGBT power switches. Using a design that inherently minimizes shoot-through current, UCC2752x can deliver high-peak current pulses of up to 5A source and 5A sink into capacitive loads along with rail-to-rail drive capability and extremely small propagation delay (typically 13ns). In addition, the drivers feature matched internal propagation delays between the two channels. These delays are very well suited for applications requiring dual-gate drives with critical timing, such as synchronous rectifiers. This also enables connecting two channels in parallel to effectively increase current-drive capability or driving two switches in parallel with one input signal. The input pin thresholds are based on TTL and CMOS compatible low-voltage logic, which is fixed and independent of the VDD supply voltage. Wide hysteresis between the high and low thresholds offers excellent noise immunity.

The UCC2752x family provides the combination of three standard logic options — dual inverting, dual noninverting, one inverting and one noninverting driver. The UCC27526 features a dual input design which offers flexibility of both inverting (IN– pin) and non-inverting (IN+ pin) configuration for each channel. Either IN+ or IN– pin controls the state of the driver output. The unused input pin is used for enable and disable functions. For safety purpose, internal pullup and pulldown resistors on the input pins of all the devices in UCC2752x family ensure that outputs are held LOW when input pins are in floating condition. The UCC27523 and UCC27525 devices feature Enable pins (ENA and ENB) to have better control of the operation of the driver applications. The pins are internally pulled up to VDD for active-high logic and are left open for standard operation.

The UCC2752x family of devices are available in SOIC-8 (D), MSOP-8 with exposed pad (DGN) and 3mm × 3mm WSON-8 with exposed pad (DSD) packages. The UCC27526 is only offered in a 3mm × 3mm WSON (DSD) package.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung.
UCC27425 AKTIV 4-A/4-A-Zweikanal-Gate-Treiber mit Aktivierung und invertierenden/nicht-invertierenden Eingängen Similar pin-to-pin device with 4A/4A drive current and similar electrical characteristics
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung.
UCC27624 AKTIV 2-Kanal-Low-Side-Treiber, 5 A/5 A, mit 4 V UVLO, 30 V VDD und geringer Ausbreitungsverzögerung More recent device with the same pinout, wider supply voltage ratings, similar electrical characteristics and dual non-inverting inputs

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 13
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt UCC2752x Dual 5A High-Speed, Low-Side Gate Drivers datasheet (Rev. H) PDF | HTML 14.06.2024
Anwendungshinweis Why use a Gate Drive Transformer? PDF | HTML 04.03.2024
Anwendungshinweis Review of Different Power Factor Correction (PFC) Topologies' Gate Driver Needs PDF | HTML 22.01.2024
Anwendungshinweis Static Magnet Power Supply Design for Magnetic Resonance Imaging Application PDF | HTML 22.01.2024
Anwendungshinweis Benefits of a Compact, Powerful, and Robust Low-Side Gate Driver PDF | HTML 10.11.2021
Application brief External Gate Resistor Selection Guide (Rev. A) 28.02.2020
Application brief Understanding Peak IOH and IOL Currents (Rev. A) 28.02.2020
Anwendungshinweis Improving Efficiency of DC-DC Conversion through Layout 07.05.2019
Application brief How to overcome negative voltage transients on low-side gate drivers' inputs 18.01.2019
Application brief High-Side Cutoff Switches for High-Power Automotive Applications (Rev. A) 26.11.2018
Weitere Dokumente Fundamentals of MOSFET and IGBT Gate Driver Circuits (Replaces SLUP169) (Rev. A) 29.10.2018
Auswahlhilfe Power Management Guide 2018 (Rev. R) 25.06.2018
Application brief Low-Side Gate Drivers With UVLO Versus BJT Totem-Pole 16.03.2018

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

UCC27423-4-5-Q1EVM — UCC2742xQ1 Dual 4-A Highspeed-Low-Side-MOSFET-Treiber mit Aktivierung – Evaluierungsmodul (EVM)

Das UCC2742xQ1-EVM ist ein Highspeed-Dual-MOSFET-Evaluierungsmodul, das eine Testplattform für die schnelle und einfache Inbetriebnahme des UCC2742xQ1-Treibers bereitstellt. Die Stromversorgung findet über eine einzelne externe Stromversorgung mit 4 V bis 15 V statt und das EVM ist mit einem (...)
Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Simulationsmodell

UCC27525 PSpice Transient Model

SLUM302.ZIP (50 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

UCC27525 Unencrypted PSpice Transient Model

SLUM477.ZIP (1 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Berechnungstool

SLURB22 — UCC2752X Schematic Review Template

Unterstützte Produkte und Hardware
Referenzdesign

TIDM-02010 — Referenzdesign für duale Motorsteuerung mit digital verschachtelter PFC (Leistungsfaktorkorrektur) f

Das Referenzdesign TIDM-02010 ist ein Referenzdesign für zwei Motorantriebe mit 1,5 kW und PFC-Steuerung für Regler von Klimaanlagen im Freien mit variabler Frequenz in Heizungs-/Lüftung-/Klima-Anwendungen (HVAC). Es zeigt ein Verfahren zur Umsetzung einer sensorlosen dreiphasigen (...)

Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HVSSOP (DGN) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian
WSON (DSD) 8 Ultra Librarian

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos