UCC28702

AKTIV

Konstantspannungs- und Konstantstrom-PWM mit PSR, NTC-Option und 150-mV-Kabel-Kompensation

Jetzt bestellen

Datenblatt

document-pdfAcrobat UCC2870x Constant-Voltage, Constant-Current Controller With Primary-Side Regulation datasheet (Rev. A) (Englisch) PDF | HTML

UCC28702

AKTIV

Jetzt bestellen

Produktdetails

Topology

Buck, Flyback

Control mode

Primary-side regulation

Features

CC/CV output regulation, Cable compensation, DCM, Leading edge blanking, NTC resistor interface, Overcurrent protection, Primary-side regulated, Quasi-Resonant, Soft start, Valley switching

Duty cycle (max) (%)

99

Topology

Buck, Flyback

Control mode

Primary-side regulation

Features

CC/CV output regulation, Cable compensation, DCM, Leading edge blanking, NTC resistor interface, Overcurrent protection, Primary-side regulated, Quasi-Resonant, Soft start, Valley switching

Duty cycle (max) (%)

99

SOT-23 (DBV)

6

8.12 mm² (2.9 mm × 2.8 mm)

< 30-mW No-Load Power for 5-Star Rating
Primary-Side Regulation (PSR) Eliminates Opto-Coupler
±5% Voltage and Current Regulation
130-kHz Maximum Switching Frequency Enables High-Power
Density Charger Designs
Quasi-Resonant Valley-Switching Operation for Highest
Overall Efficiency
Patent-Pending Frequency-Jitter Scheme to Ease EMI
Compliance
Wide VDD Range Allows Small Bias Capacitor
Clamped Gate-Drive Output for MOSFET
Protection Functions: Overvoltage, Low-Line, and
Overcurrent
Programmable Cable Compensation (UCC28700 Only)
NTC Resistor Interface (UCC28701, UCC28702 and UCC28703
Only) With Fixed Cable Compensation Options
SOT-23 Package

< 30-mW No-Load Power for 5-Star Rating
Primary-Side Regulation (PSR) Eliminates Opto-Coupler
±5% Voltage and Current Regulation
130-kHz Maximum Switching Frequency Enables High-Power
Density Charger Designs
Quasi-Resonant Valley-Switching Operation for Highest
Overall Efficiency
Patent-Pending Frequency-Jitter Scheme to Ease EMI
Compliance
Wide VDD Range Allows Small Bias Capacitor
Clamped Gate-Drive Output for MOSFET
Protection Functions: Overvoltage, Low-Line, and
Overcurrent
Programmable Cable Compensation (UCC28700 Only)
NTC Resistor Interface (UCC28701, UCC28702 and UCC28703
Only) With Fixed Cable Compensation Options
SOT-23 Package

The UCC28700 family of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28700 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700 allows the level of cable compensation to be programmed. The UCC28701, UCC28702, and UCC28703 devices allow remote temperature sensing using a Negative Temperature Coefficient (NTC) resistor while providing fixed cable-compensation levels.

The UCC28700 family of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28700 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700 allows the level of cable compensation to be programmed. The UCC28701, UCC28702, and UCC28703 devices allow remote temperature sensing using a Negative Temperature Coefficient (NTC) resistor while providing fixed cable-compensation levels.

filter

Andere AC/DC-Controller suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 10

Top-Dokumentation	Typ	Titel	Format-Optionen
*	Datenblatt	UCC2870x Constant-Voltage, Constant-Current Controller With Primary-Side Regulation datasheet (Rev. A)	PDF \| HTML	12.12.2014
	Anwendungshinweis	Flyback Aux Winding OVP and UVLO Fault Sensing Design and Troubleshooting Tips	PDF \| HTML	31.08.2021
	Anwendungshinweis	Minimize Standby Consumption for UCC287XX Family		01.08.2019
	Anwendungshinweis	Selecting Electrolitic Bus Capacitor for Universal Input		17.07.2018
	Auswahlhilfe	Power Management Guide 2018 (Rev. R)		25.06.2018
	Anwendungshinweis	Troubleshooting TI PSR controllers		03.10.2016
	Whitepaper	Control Challenges for Low Power AC/DC Converters		02.10.2015
	Whitepaper	Control Challenges for Low Power AC/DC Converters (PPT)		02.10.2015
	Anwendungshinweis	UCC28700 5-W USB Flyback Design Review (Rev. C)		21.02.2014
	Weitere Dokumente	Exposing the Inner Behavior of a Quasi-Resonant Flyback Converter		29.10.2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

UCC28700EVM-068 — UCC28700 – Evaluierungsmodul

Das Evaluierungsmodul (EVM) UCC28700EVM-068 von Texas Instruments unterstützt Entwickler bei der Leistungsbewertung des UCC28700, einem PWM-Controller mit konstanter Spannung und konstantem Strom sowie primärseitiger Regelung. Das 5-W-EVM wird zur Evaluierung eines Offline-Adapters für (...)

Benutzerhandbuch: PDF

Unterstützte Produkte und Hardware

Vorrätig

Limit:

Zum Bestellen bitte anmelden

lock

Melden Sie sich an, um den Lagerbestand einzusehen

??asset.out-of-stock-ti_de_DE??

Nicht verfügbar

Simulationsmodell