Inicio Convertidores de datos Convertidores analógico-digitales (ADC) ADC de alta velocidad (≥ 10 MSPS)
Inicio
Convertidores de datos
Convertidores analógico-digitales (ADC)
ADC de alta velocidad (≥ 10 MSPS)
NUEVO

ADC12QJ1600-SP

ACTIVO

ADC de 12 bits, cuatro canales, 1.6 GSPS, 300 krad, con garantía de dureza de radiación (RHA)

Haga su pedido ahora
Hoja de datos

ADC12QJ1600-SP

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Sample rate (max) (Msps) 1600 Resolution (Bits) 12 Number of input channels 4 Interface type JESD204B, JESD204C Analog input BW (MHz) 6000 Features Ultra High Speed Rating Space Peak-to-peak input voltage range (V) 0.8 Power consumption (typ) (mW) 1910 Architecture Folding Interpolating SNR (dB) 57.4 ENOB (bit) 9 SFDR (dB) 64 Operating temperature range (°C) -55 to 125 Input buffer Yes Radiation, TID (typ) (krad) 300 Radiation, SEL (MeV·cm2/mg) 120
Sample rate (max) (Msps) 1600 Resolution (Bits) 12 Number of input channels 4 Interface type JESD204B, JESD204C Analog input BW (MHz) 6000 Features Ultra High Speed Rating Space Peak-to-peak input voltage range (V) 0.8 Power consumption (typ) (mW) 1910 Architecture Folding Interpolating SNR (dB) 57.4 ENOB (bit) 9 SFDR (dB) 64 Operating temperature range (°C) -55 to 125 Input buffer Yes Radiation, TID (typ) (krad) 300 Radiation, SEL (MeV·cm2/mg) 120
FCCSP (ALR) 144 100 mm² 10 x 10
  • Radiation Performance:
    • Total Ionizing Dose (TID): 300 krad (Si)
    • Single Event Latchup (SEL): 120 MeV-cm2/mg
    • Single Event Upset (SEU) immune registers
  • ADC Core:
    • Resolution: 12 Bit
    • Maximum sampling rate: 1.6 GSPS
    • Non-interleaved architecture
    • Internal dither reduces high-order harmonics
  • Performance specifications (–1 dBFS):
    • SNR (100 MHz): 57.4 dBFS
    • ENOB (100 MHz): 9.1 Bits
    • SFDR (100 MHz): 64 dBc
    • Noise floor (–20 dBFS): –147 dBFS
  • Full-scale input voltage: 800 mV PP-DIFF
  • Full-power input bandwidth: 6 GHz
  • JESD204C Serial data interface:
    • Support for 2 to 8 total SerDes lanes
    • Maximum baud-rate: 17.16 Gbps
    • 64B/66B and 8B/10B encoding modes
    • Subclass-1 support for deterministic latency
    • Compatible with JESD204B receivers
  • Optional internal sampling clock generation
    • Internal PLL and VCO (7.2–8.2 GHz)
  • SYSREF Windowing eases synchronization
  • Four clock outputs simplify system clocking
    • Reference clocks for FPGA or adjacent ADC
    • Reference clock for SerDes transceivers
  • Timestamp input and output for pulsed systems
  • Power consumption (1 GSPS): 1.9W
  • Power supplies: 1.1 V, 1.9 V
  • Radiation Performance:
    • Total Ionizing Dose (TID): 300 krad (Si)
    • Single Event Latchup (SEL): 120 MeV-cm2/mg
    • Single Event Upset (SEU) immune registers
  • ADC Core:
    • Resolution: 12 Bit
    • Maximum sampling rate: 1.6 GSPS
    • Non-interleaved architecture
    • Internal dither reduces high-order harmonics
  • Performance specifications (–1 dBFS):
    • SNR (100 MHz): 57.4 dBFS
    • ENOB (100 MHz): 9.1 Bits
    • SFDR (100 MHz): 64 dBc
    • Noise floor (–20 dBFS): –147 dBFS
  • Full-scale input voltage: 800 mV PP-DIFF
  • Full-power input bandwidth: 6 GHz
  • JESD204C Serial data interface:
    • Support for 2 to 8 total SerDes lanes
    • Maximum baud-rate: 17.16 Gbps
    • 64B/66B and 8B/10B encoding modes
    • Subclass-1 support for deterministic latency
    • Compatible with JESD204B receivers
  • Optional internal sampling clock generation
    • Internal PLL and VCO (7.2–8.2 GHz)
  • SYSREF Windowing eases synchronization
  • Four clock outputs simplify system clocking
    • Reference clocks for FPGA or adjacent ADC
    • Reference clock for SerDes transceivers
  • Timestamp input and output for pulsed systems
  • Power consumption (1 GSPS): 1.9W
  • Power supplies: 1.1 V, 1.9 V

ADC12QJ1600-SP is a quad channel, 12-bit, 1.6 GSPS analog-to-digital converters (ADC). Low power consumption, high sampling rate and 12-bit resolution makes the device suited for a variety of multi-channel communications systems.

Full-power input bandwidth (-3 dB) of 6 GHz enables direct RF sampling of L-band and S-band.

A number of clocking features are included to relax system hardware requirements, such as an internal phase-locked loop (PLL) with integrated voltage-controlled oscillator (VCO) to generate the sampling clock. Four clock outputs are provided to clock the logic and SerDes of the FPGA or ASIC. A timestamp input and output is provided for pulsed systems.

JESD204C serialized interface decreases system size by reducing the amount of printed circuit board (PCB) routing. Interface modes support from 2 to 8 lanes (dual and quad channel devices) or 1 to 4 lanes (for the single channel device), with SerDes baud-rates up to 17.16 Gbps, to allow the optimal configuration for each application.

ADC12QJ1600-SP is a quad channel, 12-bit, 1.6 GSPS analog-to-digital converters (ADC). Low power consumption, high sampling rate and 12-bit resolution makes the device suited for a variety of multi-channel communications systems.

Full-power input bandwidth (-3 dB) of 6 GHz enables direct RF sampling of L-band and S-band.

A number of clocking features are included to relax system hardware requirements, such as an internal phase-locked loop (PLL) with integrated voltage-controlled oscillator (VCO) to generate the sampling clock. Four clock outputs are provided to clock the logic and SerDes of the FPGA or ASIC. A timestamp input and output is provided for pulsed systems.

JESD204C serialized interface decreases system size by reducing the amount of printed circuit board (PCB) routing. Interface modes support from 2 to 8 lanes (dual and quad channel devices) or 1 to 4 lanes (for the single channel device), with SerDes baud-rates up to 17.16 Gbps, to allow the optimal configuration for each application.
open-in-new Buscar otro/a ADC de alta velocidad (≥ 10 MSPS)
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
ADC12QJ1600 ACTIVO ADC de cuatro canales, 12 bits, 1,6 GSPS con interfaz JESD204C y generador de reloj de muestras inte The industrial ADC12QJ1600 is pin-for-pin with the -Q1, -SP and -EP versions.
ADC12QJ1600-EP ACTIVO Producto mejorado, ADC de cuatro canales, 12 bits y 1.6 GSPS con interfaz JESD204C ADC12QJ1600-EP is an excellent prototyping option for the ADC12QJ1600-SP. Same pinout and build materials.
ADC12QJ1600-Q1 ACTIVO ADC de automoción de 4 canales, 12 bits y 1.6 GSPS con interfaz JESD204C The automotive ADC12QJ1600-Q1 is pin-for-pin with the -SP and -EP versions.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet ADC12QJ1600-SP Quad Channel 1.6-GSPS, 12-Bit, Analog-to-Digital Converter (ADC) with JESD204C Interface datasheet (Rev. A) PDF | HTML 11 jul 2023
Technical article How SHP in plastic packaging addresses 3 key space application design challenges PDF | HTML 17 oct 2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

ADC12QJ1600EVM — Módulo de evaluación de ADC12QJ1600 para ADC de 1,6 GSPS de cuatro canales y 12 bits con interfaz JE

The ADC12QJ1600 evaluation module (EVM) allows for the evaluation of the ADC12QJ1600-Q1 product. ADC12QJ1600-Q1 is a low-power, 12-bit, quad-channel, 1.6-GSPS analog-to-digital converter (ADC) with a buffered analog input and integrated digital down converter with on-chip PLL, which (...)

Guía del usuario: PDF
No disponible en TI.com
Placa de evaluación

TSW12QJ1600EVM — Módulo de evaluación ADC de interfaz de 8 canales (4 canales, dos sincronizados) de 12 bits 1.6 GSPS

The TSW12QJ1600 evaluation module (EVM) is used to evaluate the ADC12QJ1600-Q1 analog-to-digital converter (ADC) with different front-end options. ADC12QJ1600-Q1 is a 12-bit ADC capable of operating at sampling rates up to 1.6 gigasample per second (GSPS) with four analog input channels.

This design (...)

Guía del usuario: PDF
No disponible en TI.com
Modelo de simulación

ADC12QJ1600 IBIS-AMI Model

SBAM512.ZIP (68 KB) - IBIS-AMI Model
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Paquete Pasadores Descargar
FCCSP (ALR) 144 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos