Inicio Convertidores de datos Convertidores analógico-digitales (ADC) ADC de precisión
Inicio
Convertidores de datos
Convertidores analógico-digitales (ADC)
ADC de precisión

ADS1118

ACTIVO

ADC delta-sigma de 16 bits, 860 SPS, 4 canales con PGA, oscilador, VREF, sensor de temperatura y SPI

Haga su pedido ahora
Hoja de datos

ADS1118

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Resolution (Bits) 16 Sample rate (max) (ksps) 0.86 Number of input channels 4 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Multichannel configuration Multiplexed Rating Catalog Reference mode Internal Input voltage range (max) (V) 5.5 Input voltage range (min) (V) 0 Features Oscillator, PGA, Small Size, Temp Sensor Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 0.3 Analog supply voltage (min) (V) 2 Analog supply voltage (max) (V) 5.5 Digital supply (min) (V) 2 Digital supply (max) (V) 5.5
Resolution (Bits) 16 Sample rate (max) (ksps) 0.86 Number of input channels 4 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Multichannel configuration Multiplexed Rating Catalog Reference mode Internal Input voltage range (max) (V) 5.5 Input voltage range (min) (V) 0 Features Oscillator, PGA, Small Size, Temp Sensor Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 0.3 Analog supply voltage (min) (V) 2 Analog supply voltage (max) (V) 5.5 Digital supply (min) (V) 2 Digital supply (max) (V) 5.5
X2QFN (RUG) 10 3 mm² (1.5 mm × 2 mm) VSSOP (DGS) 10 14.7 mm² (3 mm × 4.9 mm)
  • Ultrasmall X2QFN Package:
    2 mm × 1.5 mm × 0.4 mm
  • Wide Supply Range: 2 V to 5.5 V
  • Low Current Consumption:
    • Continuous Mode: Only 150 µA
    • Single-Shot Mode: Automatic Power Down
  • Programmable Data Rate:
    8 SPS to 860 SPS
  • Single-Cycle Settling
  • Internal Low-Drift Voltage Reference
  • Internal Temperature Sensor:
    0.5°C (Maximum) Error: 0°C to 70°C
  • Internal Oscillator
  • Internal PGA
  • Four Single-Ended or Two Differential Inputs
  • Ultrasmall X2QFN Package:
    2 mm × 1.5 mm × 0.4 mm
  • Wide Supply Range: 2 V to 5.5 V
  • Low Current Consumption:
    • Continuous Mode: Only 150 µA
    • Single-Shot Mode: Automatic Power Down
  • Programmable Data Rate:
    8 SPS to 860 SPS
  • Single-Cycle Settling
  • Internal Low-Drift Voltage Reference
  • Internal Temperature Sensor:
    0.5°C (Maximum) Error: 0°C to 70°C
  • Internal Oscillator
  • Internal PGA
  • Four Single-Ended or Two Differential Inputs

The ADS1118 is a precision, low power, 16-bit analog-to-digital converter (ADC) that provides all features necessary to measure the most common sensor signals in an ultra-small, leadless X2QFN-10 package or a VSSOP-10 package. The ADS1118 integrates a programmable gain amplifier (PGA), voltage reference, oscillator and high-accuracy temperature sensor. These features, along with a wide power supply range from 2 V to 5.5 V, make the ADS1118 ideally suited for power- and space-constrained, sensor-measurement applications.

The ADS1118 can perform conversions at data rates up to 860 samples per second (SPS). The PGA offers input ranges from ±256 mV to ±6.144 V, allowing both large and small signals to be measured with high resolution. An input multiplexer (MUX) allows to measure two differential or four single-ended inputs. The high-accuracy temperature sensor can be used for system-level temperature monitoring or cold-junction compensation for thermocouples.

The ADS1118 operates either in continuous-conversion mode, or in a single-shot mode that automatically powers down after a conversion. Single-shot mode significantly reduces current consumption during idle periods. Data are transferred through a serial peripheral interface (SPI™). The ADS1118 is specified from –40°C to +125°C.

The ADS1118 is a precision, low power, 16-bit analog-to-digital converter (ADC) that provides all features necessary to measure the most common sensor signals in an ultra-small, leadless X2QFN-10 package or a VSSOP-10 package. The ADS1118 integrates a programmable gain amplifier (PGA), voltage reference, oscillator and high-accuracy temperature sensor. These features, along with a wide power supply range from 2 V to 5.5 V, make the ADS1118 ideally suited for power- and space-constrained, sensor-measurement applications.

The ADS1118 can perform conversions at data rates up to 860 samples per second (SPS). The PGA offers input ranges from ±256 mV to ±6.144 V, allowing both large and small signals to be measured with high resolution. An input multiplexer (MUX) allows to measure two differential or four single-ended inputs. The high-accuracy temperature sensor can be used for system-level temperature monitoring or cold-junction compensation for thermocouples.

The ADS1118 operates either in continuous-conversion mode, or in a single-shot mode that automatically powers down after a conversion. Single-shot mode significantly reduces current consumption during idle periods. Data are transferred through a serial peripheral interface (SPI™). The ADS1118 is specified from –40°C to +125°C.
filter Buscar otro/a ADC de precisión
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
ADS1018 ACTIVO ADC delta-sigma de 12 bits, 3,3 kSPS, 4 canales con PGA, oscilador, VREF, sensor de temperatura y SP Higher sample rate (3.3 kSPS), lower resolution (12-bit)

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 13
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos ADS1118 Ultrasmall, Low-Power, SPI-Compatible, 16-Bit Analog-to-Digital Converter with Internal Reference and Temperature Sensor datasheet (Rev. F) PDF | HTML 11/09/2019
Nota sobre la aplicación K-type thermocouple measurement circuit with precision ADC (Rev. A) PDF | HTML 20/09/2024
Circuit design Precision measurement circuit with 8 different channels and SPI (Rev. A) PDF | HTML 19/09/2024
Circuit design Two-channel, K-type thermocouple measurement circuit with internal temperature (Rev. A) PDF | HTML 18/09/2024
Nota sobre la aplicación Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs (Rev. A) PDF | HTML 18/03/2024
Nota sobre la aplicación QFN and SON PCB Attachment (Rev. C) PDF | HTML 6/12/2023
Nota sobre la aplicación Digital Filter Types in Delta-Sigma ADCs (Rev. A) PDF | HTML 29/03/2023
Nota sobre la aplicación A Basic Guide to Thermocouple Measurements (Rev. A) PDF | HTML 29/03/2023
Libro electrónico Fundamentals of Precision ADC Noise Analysis (Rev. A) 19/06/2020
Guía del usuario 430BOOST-ADS1118 BoosterPack User's Guide (Rev. A) 20/07/2017
Analog Design Journal How delta-sigma ADCs work, Part 1 (Rev. A) 19/09/2016
Libro electrónico Best of Baker's Best: Precision Data Converters -- Delta-Sigma ADCs 19/03/2015
Analog Design Journal How delta-sigma ADCs work, Part 2 9/11/2011

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

ADS1118EVM — Módulo de evaluación de ADC delta-sigma de ADS1118 de 16 bits, 860 SPS y 4 canales

The ADS1118 evaluation module (EVM) is a complete solution for evaluation of the ADS1118 ultra-small, low-power, precision 16-bit analog-to-digital converter (ADC). Power and I/O are provided via USB connection and a simple software interface. Analog inputs can be connected to a terminal block (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Firmware

SBAC121 — 430BOOST-ADS1118 Firmware

Productos y hardware compatibles
Soporte de software

ADS1118-C-EXAMPLE-CODE — ADS1118 example C code

Expedite your embedded design using this example C code for the ADS1118
Productos y hardware compatibles
Soporte de software

SBAC117 — ADS1118EVM Source Code

Productos y hardware compatibles
Modelo de simulación

ADS1118 IBIS Model

SBAM083.ZIP (70 KB) - Modelo IBIS
Productos y hardware compatibles
Herramienta de cálculo

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

La calculadora del ingeniero analógico está diseñada para acelerar muchos de los cálculos repetitivos que los ingenieros de diseño de circuitos analógicos utilizan de forma habitual. Esta herramienta para PC proporciona una interfaz gráfica con una lista de varios cálculos comunes que van desde el (...)

Productos y hardware compatibles
Diseño de referencia

TIPD109 — Diseño de referencia de solución de medición de termopar simple con una precisión <1 °C

This thermocouple measurement verified design provides a very simple and accurate method way to implement thermocouple measurement. This design outlines the necessary anti-aliasing filters and biasing resistors to provide sensor diagnostics. This example also provides a novel way of accomplishing (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
X2QFN (RUG) 10 Ultra Librarian
VSSOP (DGS) 10 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos