ADS8555

ACTIVO

Convertidor analógico a digital (ADC) de muestreo simultáneo de 630 kSPS, 16 bits y 6 canales

Detalles del producto

Resolution (Bits) 16 Sample rate (max) (ksps) 630 Number of input channels 6 Interface type Byte-Wide, Parallel, SPI Architecture SAR Input type Single-ended Multichannel configuration Simultaneous Sampling Rating Catalog Reference mode External, Internal Input voltage range (max) (V) 12 Input voltage range (min) (V) -12 Features Daisy-Chainable, Oscillator Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 335 Analog supply voltage (min) (V) 4.5 Analog supply voltage (max) (V) 5.5 SNR (dB) 91.5 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.5
Resolution (Bits) 16 Sample rate (max) (ksps) 630 Number of input channels 6 Interface type Byte-Wide, Parallel, SPI Architecture SAR Input type Single-ended Multichannel configuration Simultaneous Sampling Rating Catalog Reference mode External, Internal Input voltage range (max) (V) 12 Input voltage range (min) (V) -12 Features Daisy-Chainable, Oscillator Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 335 Analog supply voltage (min) (V) 4.5 Analog supply voltage (max) (V) 5.5 SNR (dB) 91.5 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.5
LQFP (PM) 64 144 mm² (12 mm × 12 mm)
  • Six SAR ADCs Grouped in Three Pairs
  • Maximum Data Rate Per Channel With Internal Clock and Reference: 630 kSPS (Parallel) or 450 kSPS (Serial)
  • Maximum Data Rate Per Channel With External Clock and Reference: 800 kSPS (Parallel) or 500 kSPS (Serial)
  • Pin-Selectable or Programmable Input Voltage Ranges: Up to ±12 V
  • Excellent AC Performance: 91.5-dB SNR, –94-dB THD
  • Programmable and Buffered Internal Reference: 0.5 V to 2.5 V and 0.5 V to 3 V
  • Comprehensive Power-Down Modes:
    • Deep Power Down (Standby Mode)
    • Auto-Nap Power Down
  • Selectable Parallel or Serial Interface
  • Operating Temperature Range: –40°C to 125°C
  • LQFP-64 Package

All other trademarks are the property of their respective owners

  • APPLICATIONS
    • Power Quality Measurements
    • Protection Relays
    • Multi-Axis Motor Controls
    • Programmable Logic Controllers
    • Industrial Data Acquisition
    • Six SAR ADCs Grouped in Three Pairs
    • Maximum Data Rate Per Channel With Internal Clock and Reference: 630 kSPS (Parallel) or 450 kSPS (Serial)
    • Maximum Data Rate Per Channel With External Clock and Reference: 800 kSPS (Parallel) or 500 kSPS (Serial)
    • Pin-Selectable or Programmable Input Voltage Ranges: Up to ±12 V
    • Excellent AC Performance: 91.5-dB SNR, –94-dB THD
    • Programmable and Buffered Internal Reference: 0.5 V to 2.5 V and 0.5 V to 3 V
    • Comprehensive Power-Down Modes:
      • Deep Power Down (Standby Mode)
      • Auto-Nap Power Down
    • Selectable Parallel or Serial Interface
    • Operating Temperature Range: –40°C to 125°C
    • LQFP-64 Package

    All other trademarks are the property of their respective owners

  • APPLICATIONS
    • Power Quality Measurements
    • Protection Relays
    • Multi-Axis Motor Controls
    • Programmable Logic Controllers
    • Industrial Data Acquisition
  • The ADS8555 device contains six low-power, 16-bit, successive approximation register (SAR)-based analog-to-digital converters (ADCs) with true bipolar inputs. Each channel contains a sample-and-hold circuit that allows simultaneous high-speed multi-channel signal acquisition.

    The ADS8555 device supports data rates of up to 630 kSPS in parallel interface mode or up to 450 kSPS if the serial interface is used. The bus width of the parallel interface can be set to eight or 16 bits. In serial mode, up to three output channels can be activated.

    The ADS8555 device is specified over the extended industrial temperature range of –40°C to 125°C and is available in an LQFP-64 package.

    The ADS8555 device contains six low-power, 16-bit, successive approximation register (SAR)-based analog-to-digital converters (ADCs) with true bipolar inputs. Each channel contains a sample-and-hold circuit that allows simultaneous high-speed multi-channel signal acquisition.

    The ADS8555 device supports data rates of up to 630 kSPS in parallel interface mode or up to 450 kSPS if the serial interface is used. The bus width of the parallel interface can be set to eight or 16 bits. In serial mode, up to three output channels can be activated.

    The ADS8555 device is specified over the extended industrial temperature range of –40°C to 125°C and is available in an LQFP-64 package.

    Descargar Ver vídeo con transcripción Video

    Documentación técnica

    No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
    Ver todo 5
    Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
    * Hoja de datos ADS8555 16-Bit, Six-Channel, Simultaneous Sampling Analog-to-Digital Converter datasheet (Rev. D) PDF | HTML 3/02/2016
    Informe Voltage-reference impact on total harmonic distortion 1/08/2016
    Libro electrónico Best of Baker's Best: Precision Data Converters -- SAR ADCs 21/05/2015
    Nota sobre la aplicación Driver Circuit Design Considerations for ADS855x 27/08/2012
    Nota sobre la aplicación Determining Minimum Acquisition Times for SAR ADCs, part 2 17/03/2011

    Diseño y desarrollo

    Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

    Placa de evaluación

    ADS8555EVM-PDK — Módulo de evaluación de ADS8555 para ADC de muestreo simultáneo de seis canales

    El kit de demostración de rendimiento (PDK) del módulo de evaluación (EVM) ADS8555 es una plataforma para evaluar la familia ADS855x de convertidores de señal analógica a digital (ADC) de muestreo simultáneo de seis canales. Los productos ADS855x incluyen una referencia de tensión integrada y (...)

    Guía del usuario: PDF | HTML
    Productos y hardware compatibles
    En inventario
    Límite:
    ??asset.out-of-stock-ti_es_MX??
    No disponible
    Modelo de simulación

    ADS8555/6/7/8 IBIS Model (Rev. B)

    SBAM011 (79 KB) - Modelo IBIS
    Productos y hardware compatibles
    Herramienta de cálculo

    ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

    La calculadora del ingeniero analógico está diseñada para acelerar muchos de los cálculos repetitivos que los ingenieros de diseño de circuitos analógicos utilizan de forma habitual. Esta herramienta para PC proporciona una interfaz gráfica con una lista de varios cálculos comunes que van desde el (...)

    Productos y hardware compatibles
    Herramienta de diseño

    ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

    The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
    Productos y hardware compatibles
    Encapsulado Pines Símbolos CAD, huellas y modelos 3D
    LQFP (PM) 64 Ultra Librarian

    Pedidos y calidad

    Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

    Soporte y capacitación

    Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

    El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

    Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

    Videos