Detalles del producto

Frequency range 2400 MHz Standard Proprietary 2.4 GHz Operating temperature range (°C) -40 to 85 Rating Catalog Transmission principle 2-FSK, GFSK, MSK
Frequency range 2400 MHz Standard Proprietary 2.4 GHz Operating temperature range (°C) -40 to 85 Rating Catalog Transmission principle 2-FSK, GFSK, MSK
VQFN (RHH) 36 36 mm² 6 x 6
  • Radio
    • High-performance RF transceiver based on the
      market-leading CC2500
    • Excellent receiver selectivity and blocking
      performance
    • High sensitivity (−103 dBm at 2.4 kBaud)
    • Programmable data rate up to 500 kBaud
    • Programmable output power up to 1 dBm for all
      supported frequencies
    • Frequency range: 2400 - 2483.5 MHz
    • Digital RSSI / LQI support
  • Current Consumption
    • Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
      TX: 16 mA @ −6 dBm output power)
    • 0.3 µA in PM3 (the operating mode with the lowest power consumption)
  • MCU, Memory, and Peripherals
    • High performance and low power 8051 microcontroller core.
    • 8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM
    • Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx)
    • I2S interface
    • 7 – 12 bit ADC with up to eight inputs
    • 128-bit AES security coprocessor
    • Powerful DMA functionality
    • Two USARTs
    • 16-bit timer with DSM mode
    • Three 8-bit timers
    • Hardware debug support
    • 21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins
  • General
    • Wide supply voltage range (2.0V - 3.6V)
    • Green package: RoHS compliant and no antimony or bromine,
      6×6mm QFN 36
  • Radio
    • High-performance RF transceiver based on the
      market-leading CC2500
    • Excellent receiver selectivity and blocking
      performance
    • High sensitivity (−103 dBm at 2.4 kBaud)
    • Programmable data rate up to 500 kBaud
    • Programmable output power up to 1 dBm for all
      supported frequencies
    • Frequency range: 2400 - 2483.5 MHz
    • Digital RSSI / LQI support
  • Current Consumption
    • Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
      TX: 16 mA @ −6 dBm output power)
    • 0.3 µA in PM3 (the operating mode with the lowest power consumption)
  • MCU, Memory, and Peripherals
    • High performance and low power 8051 microcontroller core.
    • 8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM
    • Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx)
    • I2S interface
    • 7 – 12 bit ADC with up to eight inputs
    • 128-bit AES security coprocessor
    • Powerful DMA functionality
    • Two USARTs
    • 16-bit timer with DSM mode
    • Three 8-bit timers
    • Hardware debug support
    • 21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins
  • General
    • Wide supply voltage range (2.0V - 3.6V)
    • Green package: RoHS compliant and no antimony or bromine,
      6×6mm QFN 36

The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.

The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 49
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet Low-Power SoC (System-on-Chip) with MCU, memory, 2.4 GHz RF Transceiver, and USB datasheet (Rev. G) 07 mar 2013
* Errata CC2510Fx, CC2511Fx Silicon Errata (Rev. D) 14 ago 2015
Application note AN103 -- Basic RF Testing of CCxxxx Devices (Rev. A) PDF | HTML 11 dic 2025
Application note DN035 -- Antenna Quick Guide (Rev. B) 09 feb 2022
Application note DN507 -- FEC Decoding 21 mar 2019
Application note 2.4-GHz Inverted F Antenna (Rev. D) 07 ene 2019
Application note CRC Implementation (Rev. E) PDF | HTML 27 sep 2018
Application note Using AES Encryption in CC111xFx and CC251xFx (Rev. C) 13 mar 2015
Application note AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A) 02 ago 2012
Application note DN119 -- Asynchronous Serial Mode for CC111xFx and CC251xFx (Rev. A) 21 mar 2012
Application note AN101 - Bootloader for CC2510/11 and CC1110/1111 Soc(System-on-Chip) Transceiver (Rev. A) 08 sep 2011
User guide CC2510EM Reference Design 3.0 (Rev. C) 01 sep 2011
Application note AN099 - Wireless Microphone with USB Interface 01 jun 2011
Application note DN034 -- YAGI 2.4 GHz PCB Antenna 14 oct 2010
Application note AN058 -- Antenna Selection Guide (Rev. B) 06 oct 2010
Application note AN082 -- One Way and Two-Way Audio Communications using the CC1110 or CC2 (Rev. A) 30 sep 2010
User guide CC2510-CC2511DK Quick Start (Rev. B) 02 sep 2010
Application note DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary 26 ago 2010
Application note AN064 -- Two Way Audio Communications Using the CC2510 (Rev. B) 30 jun 2010
Application note DN505 -- RSSI interpretation and timing (Rev. D) 16 jun 2010
Application note DN509 -- Data Whitening and Random TX Mode 12 abr 2010
Application note AN085 -- Implementing Diversity Using Low Power Radios 26 ene 2010
Application note DN107 -- DMA and Radio Configuration (Rev. A) 17 dic 2009
Application note DN118 -- Porting SimpliciTI to the SmartRF CCxx10 Target Board 01 dic 2009
User guide CC1110 and CC2510 Mini Development Kit User's Guide (Rev. A) 17 nov 2009
More literature CC2510 Mini Development Kit Quick Start Guide (Rev. A) 17 nov 2009
Application note DN117 -- SimpliciTI-compatible UART Driver 22 sep 2009
Application note AN080 -- LED Lighting with Remote Control using CC2510 and CC1110 16 sep 2009
User guide CC1110 and CC2510 Mini DK Software Example User's Guide 02 sep 2009
Application note DN112 -- Using UART in CC111xFx CC243x CC251xFx and CC253xFx (Rev. B) 11 ago 2009
Application note DN113 CC111xFx CC243xFx CC251xFx CC253xFx SPI Interface (Rev. A) 11 ago 2009
Application note DN116 -- Clearing Module Interrupt Flags in LPW SoC Devices 03 ago 2009
User guide CC1111/CC2511 USB HW User's Guide (Rev. B) 31 jul 2009
Application note DN115 -- Using PWM for Dimmer Function in LED Lighting 16 jun 2009
User guide CC USB Software Examples User's Guide 11 may 2009
Application note DN111 - Current Consumption for a Polling Receiver (Rev. A) 24 mar 2009
Application note DN300 -- SmartRF04EB Troubleshooting (Rev. B) 24 mar 2009
Application note AN043 -- Small Size 2.4 GHz PCB Antenna (Rev. D) 04 abr 2008
Application note DN021 - CC2500 and CC2510 Sensitivity versus Frequency Offset and Crystal Accura 10 mar 2008
Application note AN048 -- 2.4GHz Chip Antenna (Rev. B) 04 mar 2008
User guide CC1110DK/CC2510DK -- Development Kit User Manual (Rev. A) 14 dic 2007
Application note DN101 -- Using the ADC to Measure Supply Voltage (Rev. A) 22 oct 2007
Application note DN102 -- SoC Temperature Sensor (Rev. A) 22 oct 2007
Application note DN504 -- FEC Implementation (Rev. A) 22 oct 2007
User guide CC1110/CC2430/CC2510 Debug and programming Interface Specifications 03 may 2007
User guide CC25xxEM Folded Dipole Reference Design 06 dic 2006
Application note DN004 Folded Dipole Antenna for CCC25xx 05 dic 2006
More literature CC2510 RoHS Confirmation 31 ene 2006
User guide IAR IDE User Manual 30 ene 2006

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

RDCR-3P-RADIO-MOD — Módulos de radio integrados Radiocrafts

Radiocrafts’ standard RF modules provide compact, easy-to-use, low cost, low power and high-performance RF solutions for a large number of wireless applications using license-free ISM bands (169 MHz – 2.4 GHz). Using modules, OEM manufacturers without RF design knowledge can easily add (...)
Sonda de depuración

CC-DEBUGGER — Depurador y programador para sistema en chips RF

The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)

Guía del usuario: PDF
Ejemplo de código o demostración

SWRC085 CC1110/CC2510 Example Software Supported on IAR Embedded Workbench

Productos y hardware compatibles

Productos y hardware compatibles

Ejemplo de código o demostración

SWRC117 CC1110, CC2510 Basic Software Examples

Productos y hardware compatibles

Productos y hardware compatibles

Ejemplo de código o demostración

SWRC133 CC1110 and CC2510 Mini DK Software Example

Productos y hardware compatibles

Productos y hardware compatibles

Controlador o biblioteca

SIMPLICITI — Pila de protocolos compatibles con SimpliciTI

SimpliciTI is a simple low-power RF network protocol aimed at small RF networks. SimpliciTI was designed for easy implementation and deployment out-of-the-box on several TI RF platforms such as the MSP430 family of low-power MCUs and the CC1XXX/CC25XX/CC430 transceivers and SoCs.

Small RF networks (...)
Controlador o biblioteca

SWRC058 CC2510 Example Library

Productos y hardware compatibles

Productos y hardware compatibles

Firmware

SWRC088 CC USB Firmware Library and Examples

Productos y hardware compatibles

Productos y hardware compatibles

Soporte de software

PACKET-SNIFFER SmartRF™ Packet Sniffer 2.18.1

The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)

Productos y hardware compatibles

Productos y hardware compatibles

Soporte de software

SWRC046 SmartRF(TM) Studio 6.13.1

Productos y hardware compatibles

Productos y hardware compatibles

Soporte de software

SWRC062 CC2511 USB-Dongle Reference Design 1.1

Productos y hardware compatibles

Productos y hardware compatibles

Herramienta de cálculo

SMARTRF-STUDIO-7 SmartRF Studio

SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)

Productos y hardware compatibles

Productos y hardware compatibles

Opciones de descarga
Herramienta de diseño

3P-WIRELESS-MODULES — Herramienta de búsqueda de módulos inalámbricos de terceros

La herramienta de búsqueda de módulos inalámbricos de terceros ayuda a los desarrolladores a identificar productos que cumplan con las especificaciones de sus equipos finales y a adquirir módulos inalámbricos listos para la producción. Los proveedores de módulos de terceros incluidos en la (...)
Herramienta de diseño

SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — Revisiones de diseño de hardware para dispositivos SimpleLink™ CC2xxx

El proceso de revisión del diseño de hardware de SimpleLink le ofrece la posibilidad de ponerse en contacto, de forma personalizada, con un experto en la materia que puede ayudarlo a revisar su diseño y proporcionarle valiosos comentarios. Aquí encontrará un sencillo proceso de 3 pasos para (...)
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RHH) 36 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos