DRA780

ACTIVO

Procesador SoC con DSP C66x de 500 MHz y 2 Arm Cortex-M4 dobles para amplificador de audio

Detalles del producto

Coprocessors 2 Dual Arm Cortex-M4 Display type 1 LCD OUT, 1 SD-DAC Protocols Ethernet PCIe 2 PCIe Gen2 Hardware accelerators 1 Audio Tracking Logic Features Multimedia Operating system Android, Linux, RTOS TI functional safety category Functional Safety-Compliant Rating Automotive Power supply solution LP873220-Q1, LP87332D-Q1, TPS659119-Q1, TPS65917-Q1 Operating temperature range (°C) -40 to 125 Edge AI enabled No
Coprocessors 2 Dual Arm Cortex-M4 Display type 1 LCD OUT, 1 SD-DAC Protocols Ethernet PCIe 2 PCIe Gen2 Hardware accelerators 1 Audio Tracking Logic Features Multimedia Operating system Android, Linux, RTOS TI functional safety category Functional Safety-Compliant Rating Automotive Power supply solution LP873220-Q1, LP87332D-Q1, TPS659119-Q1, TPS65917-Q1 Operating temperature range (°C) -40 to 125 Edge AI enabled No
FCBGA (ABF) 367 225 mm² (15 mm × 15 mm)
  • Architecture designed for infotainment applications
  • Up to 2 C66x floating-point VLIW DSP
    • Fully object-code compatible with C67x and C64x+
    • Up to thirty-two 16 × 16-bit fixed-point multiplies per cycle
  • Up to 512kB of on-chip L3 RAM
  • Level 3 (L3) and Level 4 (L4) interconnects
  • Memory Interface (EMIF) module
    • Supports DDR3/DDR3L up to DDR-1066
    • Supports DDR2 up to DDR-800
    • Up to 2GB supported
  • Dual Arm® Cortex®-M4 (IPU)
  • Vision accelerationPac
    • Embedded Vision Engine (EVE)
  • Display subsystem
    • Display controller with DMA engine
    • CVIDEO / SD-DAC TV analog composite output
  • On-chip temperature sensor that is capable of generating temperature alerts
  • General-Purpose Memory Controller (GPMC)
  • Enhanced Direct Memory Access (EDMA) controller
  • 3-port (2 external) Gigabit Ethernet (GMAC) switch
  • Controller Area Network (DCAN) module
    • CAN 2.0B protocol
  • Modular Controller Area Network (MCAN) module
    • CAN 2.0B protocol
  • Eight 32-bit general-purpose timers
  • Three configurable UART modules
  • Four Multichannel Serial Peripheral Interfaces (McSPI)
  • Quad SPI interface
  • Two Inter-Integrated Circuit (I2C™) ports
  • Three Multichannel Audio Serial Port (McASP) modules
  • Secure Digital Input Output Interface (SDIO)
  • Up to 126 General-Purpose I/O (GPIO) pins
  • Power, reset, and clock management
  • On-chip debug with CTools technology
  • Automotive AEC-Q100 qualified
  • 15 × 15 mm, 0.65-mm pitch, 367-pin PBGA (ABF)
  • Five instances of Real-Time Interrupt (RTI) modules that can be used as watch dog timers
  • 8-channel 10-bit ADC
  • PWMSS
  • Video and image processing support
    • Full-HD video (1920 × 1080p, 60 fps)
    • Video input and video output
    • GPIOs when not used for video
  • Video Input Port (VIP) module
    • Support for up to 4 multiplexed input ports
  • Architecture designed for infotainment applications
  • Up to 2 C66x floating-point VLIW DSP
    • Fully object-code compatible with C67x and C64x+
    • Up to thirty-two 16 × 16-bit fixed-point multiplies per cycle
  • Up to 512kB of on-chip L3 RAM
  • Level 3 (L3) and Level 4 (L4) interconnects
  • Memory Interface (EMIF) module
    • Supports DDR3/DDR3L up to DDR-1066
    • Supports DDR2 up to DDR-800
    • Up to 2GB supported
  • Dual Arm® Cortex®-M4 (IPU)
  • Vision accelerationPac
    • Embedded Vision Engine (EVE)
  • Display subsystem
    • Display controller with DMA engine
    • CVIDEO / SD-DAC TV analog composite output
  • On-chip temperature sensor that is capable of generating temperature alerts
  • General-Purpose Memory Controller (GPMC)
  • Enhanced Direct Memory Access (EDMA) controller
  • 3-port (2 external) Gigabit Ethernet (GMAC) switch
  • Controller Area Network (DCAN) module
    • CAN 2.0B protocol
  • Modular Controller Area Network (MCAN) module
    • CAN 2.0B protocol
  • Eight 32-bit general-purpose timers
  • Three configurable UART modules
  • Four Multichannel Serial Peripheral Interfaces (McSPI)
  • Quad SPI interface
  • Two Inter-Integrated Circuit (I2C™) ports
  • Three Multichannel Audio Serial Port (McASP) modules
  • Secure Digital Input Output Interface (SDIO)
  • Up to 126 General-Purpose I/O (GPIO) pins
  • Power, reset, and clock management
  • On-chip debug with CTools technology
  • Automotive AEC-Q100 qualified
  • 15 × 15 mm, 0.65-mm pitch, 367-pin PBGA (ABF)
  • Five instances of Real-Time Interrupt (RTI) modules that can be used as watch dog timers
  • 8-channel 10-bit ADC
  • PWMSS
  • Video and image processing support
    • Full-HD video (1920 × 1080p, 60 fps)
    • Video input and video output
    • GPIOs when not used for video
  • Video Input Port (VIP) module
    • Support for up to 4 multiplexed input ports

The DRA78x processor is offered in a 367-ball, 15×15-mm, 0.65-mm ball pitch (0.8 mm spacing rules can be used on signals) with Via Channel™ Array (VCA) technology, ball grid array (FCBGA) package.

The architecture is designed to deliver high-performance concurrencies for automotive co-processor, hybrid radio and amplifier applications in a cost-effective solution, providing full scalability from the DRA75x ("Jacinto 6 EP" and "Jacinto 6 Ex"), DRA74x "Jacinto 6", DRA72x "Jacinto 6 Eco", and DRA71x "Jacinto 6 Entry" family of infotainment processors.

Additionally, Texas Instruments (TI) provides a complete set of development tools for the Arm, and DSP, including C compilers and a debugging interface for visibility into source code execution.

The DRA78x Jacinto 6 RSP (Radio Sound Processor) device family is qualified according to the AEC-Q100 standard.

The device features a simplified power supply rail mapping which enables lower cost PMIC solutions.

The DRA78x processor is offered in a 367-ball, 15×15-mm, 0.65-mm ball pitch (0.8mm spacing rules can be used on signals) with Via Channel™ Array (VCA) technology, ball grid array (FCBGA) package.

The architecture is designed to deliver high-performance concurrencies for automotive co-processor, hybrid radio and amplifier applications in a cost-effective solution, providing full scalability from the DRA75x ("Jacinto 6 EP" and "Jacinto 6 Ex"), DRA74x "Jacinto 6", DRA72x "Jacinto 6 Eco", and DRA71x "Jacinto 6 Entry" family of infotainment processors.

Additionally, Texas Instruments (TI) provides a complete set of development tools for the Arm, and DSP, including C compilers and a debugging interface for visibility into source code execution.

The DRA78x Jacinto 6 RSP (Radio Sound Processor) device family is qualified according to the AEC-Q100 standard.

The device features a simplified power supply rail mapping which enables lower cost PMIC solutions.

The DRA78x processor is offered in a 367-ball, 15×15-mm, 0.65-mm ball pitch (0.8 mm spacing rules can be used on signals) with Via Channel™ Array (VCA) technology, ball grid array (FCBGA) package.

The architecture is designed to deliver high-performance concurrencies for automotive co-processor, hybrid radio and amplifier applications in a cost-effective solution, providing full scalability from the DRA75x ("Jacinto 6 EP" and "Jacinto 6 Ex"), DRA74x "Jacinto 6", DRA72x "Jacinto 6 Eco", and DRA71x "Jacinto 6 Entry" family of infotainment processors.

Additionally, Texas Instruments (TI) provides a complete set of development tools for the Arm, and DSP, including C compilers and a debugging interface for visibility into source code execution.

The DRA78x Jacinto 6 RSP (Radio Sound Processor) device family is qualified according to the AEC-Q100 standard.

The device features a simplified power supply rail mapping which enables lower cost PMIC solutions.

The DRA78x processor is offered in a 367-ball, 15×15-mm, 0.65-mm ball pitch (0.8mm spacing rules can be used on signals) with Via Channel™ Array (VCA) technology, ball grid array (FCBGA) package.

The architecture is designed to deliver high-performance concurrencies for automotive co-processor, hybrid radio and amplifier applications in a cost-effective solution, providing full scalability from the DRA75x ("Jacinto 6 EP" and "Jacinto 6 Ex"), DRA74x "Jacinto 6", DRA72x "Jacinto 6 Eco", and DRA71x "Jacinto 6 Entry" family of infotainment processors.

Additionally, Texas Instruments (TI) provides a complete set of development tools for the Arm, and DSP, including C compilers and a debugging interface for visibility into source code execution.

The DRA78x Jacinto 6 RSP (Radio Sound Processor) device family is qualified according to the AEC-Q100 standard.

The device features a simplified power supply rail mapping which enables lower cost PMIC solutions.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 36
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos DRA78x Infotainment Applications Processor datasheet (Rev. H) PDF | HTML 4/02/2020
* Guía del usuario DRA78x Technical Reference Manual (Rev. D) 30/07/2019
* Errata DRA78x Silicon Errata (Rev. B) 1/10/2019
Nota sobre la aplicación Integrating virtual DRM between VISION SDK and PSDK on Jacinto6 SOC PDF | HTML 5/05/2021
Nota sobre la aplicación IVA-HD Sharing Between VISION-SDK and PSDKLA on Jacinto6 SoC PDF | HTML 24/08/2020
Nota sobre la aplicación AM57x, DRA7x, and TDA2x EMIF Tools (Rev. E) 6/01/2020
Nota sobre la aplicación Integrating New Cameras With Video Input Port on DRA7xx SoCs PDF | HTML 11/06/2019
Nota sobre la aplicación Achieving Early CAN Response on DRA7xx Devices 28/11/2018
Nota sobre la aplicación DRA74x_75x/DRA72x Performance (Rev. A) 31/10/2018
Nota sobre la aplicación Audio Post Processing Engine on Jacinto™ DRA7x Family of Devices 14/09/2018
Nota sobre la aplicación The Implementation of YUV422 Output for SRV 2/08/2018
Nota sobre la aplicación MMC DLL Tuning (Rev. B) 31/07/2018
Nota sobre la aplicación Integrating AUTOSAR on TI SoC: Fundamentals 18/06/2018
Nota sobre la aplicación ECC/EDC on TDAxx (Rev. B) 13/06/2018
Nota sobre la aplicación Tools and Techniques to Root Case Failures in Video Capture Subsystem 12/06/2018
Nota sobre la aplicación Sharing VPE Between VISIONSDK and PSDKLA 4/05/2018
Nota sobre la aplicación Android Boot Optimization on DRA7xx Devices (Rev. A) 13/02/2018
Nota sobre la aplicación Using Peripheral Boot and DFU for Rapid Development on Jacinto 6 Devices (Rev. A) 30/11/2017
Nota sobre la aplicación Jacinto6 Spread Spectrum Clocking Configuration (Rev. A) 27/11/2017
Nota sobre la aplicación Optimizing DRA7xx and TDA2xx Processors for use with Video Display SERDES (Rev. B) 7/11/2017
Nota sobre la aplicación A Guide to Debugging With CCS on the DRA75x, DRA74x, TDA2x and TDA3x Family of D (Rev. B) 3/11/2017
Nota sobre la aplicación Optimization of GPU-Based Surround View on TI’s TDA2x SoC 12/09/2017
Nota sobre la aplicación Using DSS Write-Back Pipeline for RGB-to-YUV Conversion on DRA7xx Devices 14/08/2017
Nota sobre la aplicación Software Guidelines to EMIF/DDR3 Configuration on DRA7xx Devices 12/07/2017
Nota sobre la aplicación Linux Boot Time Optimizations on DRA7xx Devices 31/03/2017
Nota sobre la aplicación Interfacing DRA75x and DRA74x Audio to Analog Codecs (Rev. A) 17/02/2017
Nota sobre la aplicación Early Splash Screen on DRA7x Devices 31/01/2017
Nota sobre la aplicación Quality of Service (QoS) Knobs for DRA74x, DRA75x & TDA2x Family of Devices (Rev. A) 15/12/2016
Nota sobre la aplicación Gstreamer Migration Guidelines 26/04/2016
Nota sobre la aplicación Flashing Binaries to DRA7xx Factory Boards Using DFU 14/04/2016
Nota sobre la aplicación Tools and Techniques for Audio Debugging 13/04/2016
Nota sobre la aplicación Debugging Tools and Techniques With IPC3.x 30/03/2016
Nota sobre la aplicación Modifying Memory Usage for IPUMM Applications Loaded IPC 3.x for DRA75x, DRA74x (Rev. A) 15/01/2016
Informe Informational ADAS as Software Upgrade to Today’s Infotainment Systems 14/10/2014
Nota sobre la aplicación Guide to fix Perf Issues Using QoS Knobs for DRA74x, DRA75x, TDA2x & TD3x Device 13/08/2014
Informe Today’s high-end infotainment soon becoming mainstream 2/06/2014

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DRA78XEVM — Módulo de evaluación DRA78x

The Jacinto™ DRA78x evaluation module (EVM) is an evaluation platform designed to speed up development efforts and reduce time-to-market for Radio Signal Processor (RSP) applications. The EVM is based on the Jacinto DRA78x SoC, which incorporates a heterogeneous, scalable architecture (...)

Guía del usuario: PDF
Desde: SVTRONICS INC
Productos y hardware compatibles
Sonda de depuración

LB-3P-TRACE32-DSP — Sistema de depuración y seguimiento Lauterbach TRACE32 para procesadores de señales digitales (DSP)

Lauterbach‘s TRACE32® tools are a suite of leading-edge hardware and software components that enables developers to analyze, optimize and certify all kinds of single- or multi-core Digital Signal processors (DSPs) which are a popular choice for audio and video processing as well as radar data (...)

Productos y hardware compatibles
Kit de desarrollo de software (SDK)

PROCESSOR-SDK-ANDROID-AUTOMOTIVE-DRA7X

Procesador de kit de desarrollo de software Linux para uso automotriz

El procesador de kit de desarrollo de software de Linux para uso automotriz es la plataforma de desarrollo de software fundamental para la familia Jacinto™ DRAx de TI de sistemas en chip de infoentretenimiento. El marco de (...)

Productos y hardware compatibles
Kit de desarrollo de software (SDK)

PROCESSOR-SDK-LINUX-AUTOMOTIVE-DRA7X — PROCESSOR-SDK-LINUX-AUTOMOTIVE-DRA7X

Procesador de kit de desarrollo de software Linux para uso automotriz

El procesador de kit de desarrollo de software de Linux para uso automotriz es la plataforma de desarrollo de software fundamental para la familia Jacinto™ DRAx de TI de sistemas en chip de infoentretenimiento. El marco de (...)

Productos y hardware compatibles
Kit de desarrollo de software (SDK)

PROCESSOR-SDK-RTOS-AUTOMOTIVE-DRA7X

Procesador de kit de desarrollo de software Linux para uso automotriz

El procesador de kit de desarrollo de software de Linux para uso automotriz es la plataforma de desarrollo de software fundamental para la familia Jacinto™ DRAx de TI de sistemas en chip de infoentretenimiento. El marco de (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

Productos y hardware compatibles
Sistema operativo (SO)

GHS-INTEGRITY-RTOS — Green Hills INTEGRITY RTOS

The flagship of Green Hills Software operating systems—the INTEGRITY RTOS—is built around a partitioning architecture to provide embedded systems with total reliability, absolute security, and maximum real-time performance. With its leadership pedigree underscored by certifications in a (...)
Productos y hardware compatibles
Soporte de software

VCTR-3P-MICROSAR — Software de vector MICROSAR AUTOSAR para microcontroladores y computadoras de alto rendimiento (H

Las familias de productos MICROSAR y DaVinci simplifican el desarrollo de unidades de control electrónico (ECU) con software sofisticados integrados y herramientas de desarrollo poderosas para microcontroladores y HPC. Con el software de infraestructura avanzado, puede crear una base óptima para (...)

Productos y hardware compatibles
Modelo de simulación

DRA78x BSDL Model

SPRM713.ZIP (9 KB) - Modelo BSDL
Productos y hardware compatibles
Modelo de simulación

DRA78x IBIS Model

SPRM703.ZIP (10940 KB) - Modelo IBIS
Productos y hardware compatibles
Modelo de simulación

DRA78x Thermal Model

SPRM704.ZIP (1 KB) - Modelo térmico
Productos y hardware compatibles
Herramienta de cálculo

CLOCKTREETOOL — Herramienta de árbol de reloj para Sitara, automoción, análisis de visión y procesadores de señal di

The Clock Tree Tool (CTT) for Sitara™ ARM®, Automotive, and Digital Signal Processors is an interactive clock tree configuration software that provides information about the clocks and modules in these TI devices. It allows the user to:

  • Visualize the device clock tree
  • Interact with clock tree (...)
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
FCBGA (ABF) 367 Ultra Librarian

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos