Inicio Controladores para motores Drivers para motores de corriente continua con escobillas (BDC)
Inicio
Controladores para motores
Drivers para motores de corriente continua con escobillas (BDC)
NUEVO

DRV8218

PRESENTACIÓN PRELIMINAR

11V, 8A H-bridge motor driver with auto-sleep mode and independent 1/2-bridge control option

Haga su pedido ahora
Hoja de datos

DRV8218

PRESENTACIÓN PRELIMINAR
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of full bridges 1 Vs (min) (V) 1.8 Vs ABS (max) (V) 12 Peak output current (A) 8 RDS(ON) (HS + LS) (mΩ) 85 Sleep current (µA) 0.007 Control mode Independent 1/2-Bridge, PH/EN, PWM Control interface Hardware (GPIO) Features Half-bridge, Low-Power Sleep Mode Topology Integrated FET Rating Catalog Operating temperature range (°C) -40 to 125
Number of full bridges 1 Vs (min) (V) 1.8 Vs ABS (max) (V) 12 Peak output current (A) 8 RDS(ON) (HS + LS) (mΩ) 85 Sleep current (µA) 0.007 Control mode Independent 1/2-Bridge, PH/EN, PWM Control interface Hardware (GPIO) Features Half-bridge, Low-Power Sleep Mode Topology Integrated FET Rating Catalog Operating temperature range (°C) -40 to 125
WSON (DSG) 8 4 mm² 2 x 2
  • N-Channel H-bridge motor driver
  • 1.8V to 11V operating supply voltage range
  • High output current capability: 8A peak
  • 80mΩ RDS(ON) (High-Side + Low-Side)
    • 40mΩ per FET
    • Parallel ½ Bridge Mode RDS(on): 20mΩ (HS1||HS2)
  • 120nA Ultra low-power sleep mode
    • <120nA at VVM = 5V, VVCC = 3.3V, TJ = 25°C
    • Timed autosleep mode to reduce GPIO
  • Supports 1.8V, 3.3V, and 5V logic inputs
  • PWM, PH/EN, independent ½ bridge, parallel ½ bridge for flexibility and reduced GPIO
  • Protection features
    • Undervoltage lockout (UVLO)
    • Overcurrent protection (OCP)
    • Thermal shutdown (TSD)
  • Can drive various types of loads:
    • One bidirectional brushed DC motor
    • Two unidirectional brushed DC motors
    • Single-coil or dual-coil latching relays
    • Push-pull and bistable solenoids
    • Other resistive, inductive, or LED loads
  • Family of devices. See Device Comparison for details.
    • DRV8210: 1.65-11V, 1Ω, multiple interfaces
    • DRV8210P: Sleep pin, PWM interface
    • DRV8212: 1.65-11V, 280mΩ, multiple interfaces
    • DRV8212P: Sleep pin, PWM interface
    • DRV8218: 1.8-11V, 80mΩ, multiple interfaces
    • DRV8220: 4.5-18V, 1Ω, multiple interfaces
  • N-Channel H-bridge motor driver
  • 1.8V to 11V operating supply voltage range
  • High output current capability: 8A peak
  • 80mΩ RDS(ON) (High-Side + Low-Side)
    • 40mΩ per FET
    • Parallel ½ Bridge Mode RDS(on): 20mΩ (HS1||HS2)
  • 120nA Ultra low-power sleep mode
    • <120nA at VVM = 5V, VVCC = 3.3V, TJ = 25°C
    • Timed autosleep mode to reduce GPIO
  • Supports 1.8V, 3.3V, and 5V logic inputs
  • PWM, PH/EN, independent ½ bridge, parallel ½ bridge for flexibility and reduced GPIO
  • Protection features
    • Undervoltage lockout (UVLO)
    • Overcurrent protection (OCP)
    • Thermal shutdown (TSD)
  • Can drive various types of loads:
    • One bidirectional brushed DC motor
    • Two unidirectional brushed DC motors
    • Single-coil or dual-coil latching relays
    • Push-pull and bistable solenoids
    • Other resistive, inductive, or LED loads
  • Family of devices. See Device Comparison for details.
    • DRV8210: 1.65-11V, 1Ω, multiple interfaces
    • DRV8210P: Sleep pin, PWM interface
    • DRV8212: 1.65-11V, 280mΩ, multiple interfaces
    • DRV8212P: Sleep pin, PWM interface
    • DRV8218: 1.8-11V, 80mΩ, multiple interfaces
    • DRV8220: 4.5-18V, 1Ω, multiple interfaces

The DRV8218 is an integrated H-bridge motor driver featuring four N-Channel power FETs, a charge pump regulator, and built-in protection circuitry. A tripler charge pump architecture enables operation down to 1.8V, maintaining stable RDS(on) even at low battery voltages. All capacitors are integrated, minimizing PCB footprint and enabling 100% duty cycle operation.

The device supports three control interface modes - PWM (IN1/IN2), phase/enable (PH/EN), and independent half-bridge - as well as a parallel half-bridge mode. Each interface includes a low-power sleep mode that reduces quiescent current to under 120nA by shutting down most internal circuitry.

Output current reaches up to 8A peak, with a logic supply range of 1.8V to 5.5V and a motor supply range of 1.8V to 11V. Built-in protection includes undervoltage lockout (UVLO), overcurrent protection (OCP), and thermal shutdown (TSD). The DRV8218 is part of a pin-to-pin compatible family with scalable RDS(on) and supply voltage options. See Device Comparison for details, or explore TI’s full portfolio of brushed motor drivers at ti.com.

The DRV8218 is an integrated H-bridge motor driver featuring four N-Channel power FETs, a charge pump regulator, and built-in protection circuitry. A tripler charge pump architecture enables operation down to 1.8V, maintaining stable RDS(on) even at low battery voltages. All capacitors are integrated, minimizing PCB footprint and enabling 100% duty cycle operation.

The device supports three control interface modes - PWM (IN1/IN2), phase/enable (PH/EN), and independent half-bridge - as well as a parallel half-bridge mode. Each interface includes a low-power sleep mode that reduces quiescent current to under 120nA by shutting down most internal circuitry.

Output current reaches up to 8A peak, with a logic supply range of 1.8V to 5.5V and a motor supply range of 1.8V to 11V. Built-in protection includes undervoltage lockout (UVLO), overcurrent protection (OCP), and thermal shutdown (TSD). The DRV8218 is part of a pin-to-pin compatible family with scalable RDS(on) and supply voltage options. See Device Comparison for details, or explore TI’s full portfolio of brushed motor drivers at ti.com.
filter Buscar otro/a Drivers para motores de corriente continua con escobillas (BDC)
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet DRV8218 11V 8A H-Bridge Motor Driver with PWM, PH/EN, and Half-Bridge Control Interfaces and Low-Power Sleep Mode datasheet PDF | HTML 05 may 2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DRV8212EVM — Controlador de motor de puente H de baja tensión con módulo de evaluación de modo de reposo con pote

El módulo de evaluación (EVM) DRV8212 permite una fácil evaluación del controlador de motor DRV8212.

DRV8212 integra un puente H de canal N, un regulador de bomba de carga y circuitos de protección. El dispositivo admite los modos de control PWM (IN1/IN2), fase/activación (PH/EN), de medio puente (...)

Guía del usuario: PDF
No disponible en TI.com
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WSON (DSG) 8 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos