Inicio Controladores para motores Drivers para motores de CC sin escobillas (BLDC) Controladores BLDC
Inicio
Controladores para motores
Drivers para motores de CC sin escobillas (BLDC)
Controladores BLDC

DRV8317

ACTIVO

Controlador de motor trifásico de 24 V máx. y pico de 5 A con detección de corriente y FET integrado

Haga su pedido ahora
Hoja de datos

DRV8317

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Architecture Integrated FET Control interface 3xPWM, 6xPWM RDS(ON) (HS + LS) (mΩ) 130 Peak output current (A) 5 Vs (min) (V) 4.5 Vs ABS (max) (V) 24 Features Integrated FETs, Current sense Amplifier, Slew Rate Adjustment, LDO Regulator Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Integrated FET Control interface 3xPWM, 6xPWM RDS(ON) (HS + LS) (mΩ) 130 Peak output current (A) 5 Vs (min) (V) 4.5 Vs ABS (max) (V) 24 Features Integrated FETs, Current sense Amplifier, Slew Rate Adjustment, LDO Regulator Operating temperature range (°C) -40 to 125
WQFN (REE) 36 20 mm² 4 x 5
  • Three-phase BLDC motor driver
    • Configurable slew rate for EMI mitigation
    • Programmable gain current sensing
    • Supports up to 200-kHz PWM frequency
    • Integrated shoot through protection
  • 4.5-V to 20-V operating voltage
    • 24-V absolute maximum voltage
  • High output current capability
    • 5-A peak current drive
  • Low on-state resistance MOSFETs
    • RDS(ON) (HS + LS) at TA = 25°C : 130-mΩ (typical)
  • Ultra-low Q-current sleep mode
    • 3-µA (max.) at VVM = 12-V, TA = 25°C
  • Multiple control interface options
    • 6x PWM control interface
    • 3x PWM control interface
  • Integrated current sensing
    • No external current sense resistor required
    • Three-phase current sense outputs
  • SPI and hardware device variants
    • 10-MHz SPI interface variant for flexibility
    • Pin configurable variant for simplicity
  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Built-in 3.3-V ± 4.5%, 80-mA LDO regulator
  • Integrated protection features
    • VM under voltage lockout (UVLO)
    • VM over voltage protection (OVP)
    • Charge pump under voltage (CPUV)
    • Over current protection (OCP)
    • Over temperature warning and shutdown (OTW/OTS)
    • Fault condition indication pin (nFAULT)
  • Three-phase BLDC motor driver
    • Configurable slew rate for EMI mitigation
    • Programmable gain current sensing
    • Supports up to 200-kHz PWM frequency
    • Integrated shoot through protection
  • 4.5-V to 20-V operating voltage
    • 24-V absolute maximum voltage
  • High output current capability
    • 5-A peak current drive
  • Low on-state resistance MOSFETs
    • RDS(ON) (HS + LS) at TA = 25°C : 130-mΩ (typical)
  • Ultra-low Q-current sleep mode
    • 3-µA (max.) at VVM = 12-V, TA = 25°C
  • Multiple control interface options
    • 6x PWM control interface
    • 3x PWM control interface
  • Integrated current sensing
    • No external current sense resistor required
    • Three-phase current sense outputs
  • SPI and hardware device variants
    • 10-MHz SPI interface variant for flexibility
    • Pin configurable variant for simplicity
  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Built-in 3.3-V ± 4.5%, 80-mA LDO regulator
  • Integrated protection features
    • VM under voltage lockout (UVLO)
    • VM over voltage protection (OVP)
    • Charge pump under voltage (CPUV)
    • Over current protection (OCP)
    • Over temperature warning and shutdown (OTW/OTS)
    • Fault condition indication pin (nFAULT)

DRV8317 provides three integrated MOSFET half-bridges for driving three-phase brushless DC (BLDC) motors with 5-V, 9-V, 12-V, or 18-V DC rails or 2s to 4s batteries. The device provides integrated three-phase current sensing which eliminates the need for external sense resistors. DRV8317 has an integrated LDO that provides a regulated 3.3-V rail capable of delivering up to 80mA for external loads like MCU, logic circuits, hall sensors etc.,

DRV8317 provides a configurable 6x or 3x PWM control scheme which can be used to implement sensored or sensorless field-oriented control (FOC), sinusoidal control, or trapezoidal control using an external microcontroller. DRV8317 is capable of driving a PWM frequency of up to 200 kHz. DRV8317 is highly configurable either through SPI (DRV8317S) or pins (DRV8317H) - PWM mode, slew rate, current sense gain are some of the configurable features.

A number of protection features including supply under voltage lockout (UVLO), over voltage protection (OVP), charge pump under voltage (CPUV), over current protection (OCP), over temperature warning (OTW) and over temperature shutdown (OTS) are integrated into DRV8317 to protect the device, motor, and system against fault events. Fault conditions are indicated by the nFAULT pin.

DRV8317 provides three integrated MOSFET half-bridges for driving three-phase brushless DC (BLDC) motors with 5-V, 9-V, 12-V, or 18-V DC rails or 2s to 4s batteries. The device provides integrated three-phase current sensing which eliminates the need for external sense resistors. DRV8317 has an integrated LDO that provides a regulated 3.3-V rail capable of delivering up to 80mA for external loads like MCU, logic circuits, hall sensors etc.,

DRV8317 provides a configurable 6x or 3x PWM control scheme which can be used to implement sensored or sensorless field-oriented control (FOC), sinusoidal control, or trapezoidal control using an external microcontroller. DRV8317 is capable of driving a PWM frequency of up to 200 kHz. DRV8317 is highly configurable either through SPI (DRV8317S) or pins (DRV8317H) - PWM mode, slew rate, current sense gain are some of the configurable features.

A number of protection features including supply under voltage lockout (UVLO), over voltage protection (OVP), charge pump under voltage (CPUV), over current protection (OCP), over temperature warning (OTW) and over temperature shutdown (OTS) are integrated into DRV8317 to protect the device, motor, and system against fault events. Fault conditions are indicated by the nFAULT pin.
filter Buscar otro/a Controladores BLDC
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet DRV8317 Three-Phase PWM Motor Driver datasheet PDF | HTML 22 feb 2022
Application note Improving Thermal Performance for Integrated FET Drivers PDF | HTML 23 ago 2024
Product overview DRV8317 versus Competitor M (Rev. A) PDF | HTML 21 ago 2023
Certificate DRV8317HEVM EU RoHS Declaration of Conformity (DoC) 04 nov 2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DRV8317HEVM — Módulo de evaluación DRV8317 para controlador de puerta de CC sin escobillas (BLDC) trifásico

El DRV8317 es un IC trifásico controlador de FET de 4.5 V a 20 V y 5 A máximo para aplicaciones de accionamiento de motores. Proporciona tres medios puentes integrados capaces de accionar directamente un motor de CC trifásico sin escobillas. El DRV8317 integra múltiples opciones de interfaz de (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Primeros pasos

MSP-MOTOR-CONTROL — MSP firmware solutions for motor control

MSP Motor Control is a collection of software, tools and examples to spin motors in 30 minutes or less with MSPM0 Arm® Cortex® M0+ MCUs and popular motor driver solutions.

MSP Motor Control provides examples for supported hardware kits to spin brushed, stepper, and three-phase motors with sensored (...)

Productos y hardware compatibles

Productos y hardware compatibles
Empiece Opciones de descarga
Herramienta de cálculo

BLDC-MOSFET-THERMAL-CALC — BLDC integrated MOSFET driver thermal calculator tool

Calculates the thermals of a BLDC integrated MOSFET driver based on user input system parameters
Productos y hardware compatibles

Productos y hardware compatibles
Descargar
Herramienta de diseño

SLVRBN8 — DRV8317 2-Layer Thermal Board Design Files

Productos y hardware compatibles

Productos y hardware compatibles
Descargar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN (REE) 36 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos