Inicio Administración de potencia Reguladores conmutados CC/CC Convertidores de CC/CC
Inicio
Administración de potencia
Reguladores conmutados CC/CC
Convertidores de CC/CC

LM2586

ACTIVO

Regulador de retorno con entrada de tensión amplia elevador de 4 V a 40 V y 3 A con sincronización d

Haga su pedido ahora
Hoja de datos

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LM5158 ACTIVO Convertidor elevador, de retorno y SEPIC con VIN amplia de 3 A, 85 V y 2.2 MHz y amplio espectro ale Newer device with higher Vout capability and higher switch current

LM2586

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Topology Boost, Flyback, Forward, SEPIC Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 60 Vout (min) (V) 1.23 Switch current limit (typ) (A) 4 Features Enable, Frequency synchronization, Nonsynchronous rectification Control mode current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.011 Duty cycle (max) (%) 98
Rating Catalog Topology Boost, Flyback, Forward, SEPIC Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 60 Vout (min) (V) 1.23 Switch current limit (typ) (A) 4 Features Enable, Frequency synchronization, Nonsynchronous rectification Control mode current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.011 Duty cycle (max) (%) 98
TO-263 (KTW) 7 153.924 mm² (10.1 mm × 15.24 mm) TO-220 (NDZ) 7 82.6008 mm² (10.16 mm × 8.13 mm)
  • Requires Few External Components
  • Family of Standard Inductors and Transformers
  • NPN Output Switches 3 A, Can Stand Off 65 V
  • Wide Input Voltage Range: 4 V to 40 V
  • Adjustable Switching Frequency: 100 kHz to 200 kHz
  • External Shutdown Capability
  • Draws Less Than 60 µA When Shut Down
  • Frequency Synchronization
  • Current-mode Operation for Improved Transient Response, Line Regulation, and Current Limit
  • Internal Soft-start Function Reduces In-rush Current During Start-up
  • Output Transistor Protected by Current Limit, Undervoltage Lockout, and Thermal Shutdown
  • System Output Voltage Tolerance of ±4% Maximum Over Line and Load Conditions
  • Create a Custom Design Using the LM2586 With the WEBENCH® Power Designer
  • Requires Few External Components
  • Family of Standard Inductors and Transformers
  • NPN Output Switches 3 A, Can Stand Off 65 V
  • Wide Input Voltage Range: 4 V to 40 V
  • Adjustable Switching Frequency: 100 kHz to 200 kHz
  • External Shutdown Capability
  • Draws Less Than 60 µA When Shut Down
  • Frequency Synchronization
  • Current-mode Operation for Improved Transient Response, Line Regulation, and Current Limit
  • Internal Soft-start Function Reduces In-rush Current During Start-up
  • Output Transistor Protected by Current Limit, Undervoltage Lockout, and Thermal Shutdown
  • System Output Voltage Tolerance of ±4% Maximum Over Line and Load Conditions
  • Create a Custom Design Using the LM2586 With the WEBENCH® Power Designer

The LM2586 series of regulators are monolithic integrated circuits specifically designed for flyback, step-up (boost), and forward converter applications. The device is available in 4 different output voltage versions: 3.3 V, 5 V, 12 V, and adjustable.

Requiring a minimum number of external components, these regulators are cost effective, and simple to use. Included in the datasheet are typical circuits of boost and flyback regulators. Also listed are selector guides for diodes and capacitors and a family of standard inductors and flyback transformers designed to work with these switching regulators.

The power switch is a 3-A NPN device that can stand-off 65 V. Protecting the power switch are current and thermal limiting circuits, and an undervoltage lockout circuit. This IC contains an adjustable frequency oscillator that can be programmed up to 200 kHz. The oscillator can also be synchronized with other devices, so that multiple devices can operate at the same switching frequency.

Other features include soft start mode to reduce in-rush current during start up, and current mode control for improved rejection of input voltage and output load transients and cycle-by-cycle current limiting. The device also has a shutdown pin, so that it can be turned off externally. An output voltage tolerance of ±4%, within specified input voltages and output load conditions, is ensured for the power supply system.

The LM2586 series of regulators are monolithic integrated circuits specifically designed for flyback, step-up (boost), and forward converter applications. The device is available in 4 different output voltage versions: 3.3 V, 5 V, 12 V, and adjustable.

Requiring a minimum number of external components, these regulators are cost effective, and simple to use. Included in the datasheet are typical circuits of boost and flyback regulators. Also listed are selector guides for diodes and capacitors and a family of standard inductors and flyback transformers designed to work with these switching regulators.

The power switch is a 3-A NPN device that can stand-off 65 V. Protecting the power switch are current and thermal limiting circuits, and an undervoltage lockout circuit. This IC contains an adjustable frequency oscillator that can be programmed up to 200 kHz. The oscillator can also be synchronized with other devices, so that multiple devices can operate at the same switching frequency.

Other features include soft start mode to reduce in-rush current during start up, and current mode control for improved rejection of input voltage and output load transients and cycle-by-cycle current limiting. The device also has a shutdown pin, so that it can be turned off externally. An output voltage tolerance of ±4%, within specified input voltages and output load conditions, is ensured for the power supply system.
filter Buscar otro/a Convertidores de CC/CC
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 23
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos LM2586 4-V to 40-V, 3-A Step-Up Wide VIN Flyback Regulator datasheet (Rev. E) PDF | HTML 4/06/2019
Nota sobre la aplicación Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 25/03/2024
Nota sobre la aplicación Basic Calculation of a Boost Converter's Power Stage (Rev. D) PDF | HTML 28/10/2022
Guía de selección Power Management Guide 2018 (Rev. R) 25/06/2018
Artículo técnico Quantifying the value of wide VIN PDF | HTML 15/06/2016
Artículo técnico DC/DC converter datasheets – System losses demystified PDF | HTML 25/04/2016
Artículo técnico DC/DC converter datasheets – System efficiency demystified PDF | HTML 18/04/2016
Nota sobre la aplicación Inverted SEPIC Made SIMPLE 31/07/2015
Nota sobre la aplicación Softstart Using Constant Current Constant Voltage Approach 24/07/2015
Nota sobre la aplicación Working With Boost Converters 15/06/2015
Nota sobre la aplicación AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 24/04/2013
Nota sobre la aplicación AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 23/04/2013
Nota sobre la aplicación AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 23/04/2013
Nota sobre la aplicación AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 23/04/2013
Nota sobre la aplicación AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 23/04/2013
Nota sobre la aplicación AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 23/04/2013
Nota sobre la aplicación AN-1082 Adjust or Synchronize LM2586/88 Switching Frequency (Rev. B) 23/04/2013
Nota sobre la aplicación AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 23/04/2013
Nota sobre la aplicación Simple Techniques Minimize Cross-Coupling in Distributed Power Systems 21/03/2007
Nota sobre la aplicación Input and Output Capacitor Selection 19/09/2005
Más documentación SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 12/07/2005
Nota sobre la aplicación AN-643 EMI/RFI Board Design (Rev. B) 3/05/2004
Nota sobre la aplicación Understanding Boost Power Stages In Switchmode Power Supplies 4/03/1999

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de cálculo

FLYBUCK-FLYBACK-DESIGN-CALC — Flybuck / Flyback Calculator

Esta herramienta ayuda a un ingeniero de fuentes de alimentación a seleccionar la topología CC-CC aislada adecuada en función de las especificaciones. Según la topología elegida, la calculadora también recomienda el CI adecuado para el diseño.

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TO-263 (KTW) 7 Ultra Librarian
TO-220 (NDZ) 7 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos