Inicio Gestión de la energía Controladores CA/CC y CC/CC (FET externo)

LM2647

ACTIVO

Controlador reductor síncrono de doble canal de 5.5 V a 28 V

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TPS56837 ACTIVO Convertidor reductor síncrono de 8 A y entrada de 4.5 V a 28 V Higher power density integrated FET converter solution for up to 8A output current

Detalles del producto

Vin (min) (V) 5.5 Vin (max) (V) 28 Iout (max) (A) 6 Operating temperature range (°C) -5 to 125 Control mode Voltage mode Topology Buck Rating Catalog Vout (min) (V) 0.6 Vout (max) (V) 6 Features Enable, Light Load Efficiency, Power good Iq (typ) (µA) 2500 Duty cycle (max) (%) 50 Number of phases 1
Vin (min) (V) 5.5 Vin (max) (V) 28 Iout (max) (A) 6 Operating temperature range (°C) -5 to 125 Control mode Voltage mode Topology Buck Rating Catalog Vout (min) (V) 0.6 Vout (max) (V) 6 Features Enable, Light Load Efficiency, Power good Iq (typ) (µA) 2500 Duty cycle (max) (%) 50 Number of phases 1
TSSOP (PW) 28 62.08 mm² 9.7 x 6.4 WQFN (NJB) 28 25 mm² 5 x 5
  • Input Voltage Range from 5.5V to 28V
  • Synchronous Dual-channel Interleaved Switching
  • Forced-PWM or Pulse-skip Modes
  • Lossless Bottom-side FET Current Sensing
  • Adaptive Duty Cycle Clamping
  • High Current N-channel FET Drivers
  • Low Shutdown Supply Currents
  • Reference Voltage Accurate to Within ±1.5%
  • Output Voltage Adjustable down to 0.6V
  • Power Good flag and Chip Enable
  • Under-voltage Lockout
  • Over-voltage/Under-voltage Protection
  • Soft-start and Soft-shutdown
  • Switching Frequency Adjustable 200kHz-500kHz

All trademarks are the property of their respective owners.

  • Input Voltage Range from 5.5V to 28V
  • Synchronous Dual-channel Interleaved Switching
  • Forced-PWM or Pulse-skip Modes
  • Lossless Bottom-side FET Current Sensing
  • Adaptive Duty Cycle Clamping
  • High Current N-channel FET Drivers
  • Low Shutdown Supply Currents
  • Reference Voltage Accurate to Within ±1.5%
  • Output Voltage Adjustable down to 0.6V
  • Power Good flag and Chip Enable
  • Under-voltage Lockout
  • Over-voltage/Under-voltage Protection
  • Soft-start and Soft-shutdown
  • Switching Frequency Adjustable 200kHz-500kHz

All trademarks are the property of their respective owners.

The LM2647 is an adjustable 200-500kHz dual channel voltage-mode controlled high-speed synchronous buck regulator controller ideally suited for battery powered applications such as laptop and notebook computers. The LM2647 requires only N-channel FETs for both the upper and lower positions of each synchronous stage. It features line feedforward to improve the response to input transients. At very light loads, the user can choose between the high-efficiency Pulse-skip mode or the constant frequency Forced-PWM mode. Lossless current limiting without the use of external sense resistors is made possible by sensing the voltage drop across the bottom FET. A unique adaptive duty cycle clamping technique is incorporated to significantly reduce peak currents under abnormal load conditions. The two independently programmable outputs switch 180° out of phase (interleaved switching) to reduce the input capacitor and filter requirements. The input voltage range is 5.5V to 28V while the output voltages are adjustable down to 0.6V.

Standard supervisory and control features include Soft-start, Power Good, output Under-voltage and Over-voltage protection, Under-voltage Lockout, Soft-shutdown and Enable.

The LM2647 is an adjustable 200-500kHz dual channel voltage-mode controlled high-speed synchronous buck regulator controller ideally suited for battery powered applications such as laptop and notebook computers. The LM2647 requires only N-channel FETs for both the upper and lower positions of each synchronous stage. It features line feedforward to improve the response to input transients. At very light loads, the user can choose between the high-efficiency Pulse-skip mode or the constant frequency Forced-PWM mode. Lossless current limiting without the use of external sense resistors is made possible by sensing the voltage drop across the bottom FET. A unique adaptive duty cycle clamping technique is incorporated to significantly reduce peak currents under abnormal load conditions. The two independently programmable outputs switch 180° out of phase (interleaved switching) to reduce the input capacitor and filter requirements. The input voltage range is 5.5V to 28V while the output voltages are adjustable down to 0.6V.

Standard supervisory and control features include Soft-start, Power Good, output Under-voltage and Over-voltage protection, Under-voltage Lockout, Soft-shutdown and Enable.

Descargar

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet LM2647 Dual Synchronous Buck Regulator Controller datasheet (Rev. F) 07 abr 2013

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​