Inicio Administración de potencia Reguladores conmutados CC/CC Convertidores de CC/CC
Inicio
Administración de potencia
Reguladores conmutados CC/CC
Convertidores de CC/CC

LM2671

ACTIVO

Convertidor reductor SIMPLE SWITCHER® de 8 V a 40 V y 500 mA con 5 componentes externos

Haga su pedido ahora
Hoja de datos

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPSM365R6 ACTIVO Módulo de alimentación de convertidor reductor síncrono de 0.6 A, entrada de 3 V a 65 V, salida de 1 Smaller design with an integrated-inductor power module.
LMZM23600 ACTIVO Módulo de alimentación CC/CC reductor de 36 V y 0,5 A en un paquete de 3,8 mm × 3 mm Smaller solution size module
TLVM13620 ACTIVO Módulo reductor de 3.6 V a 36 V de entrada, 1 V a 6 V de salida, 2 A, en encapsulado de 4 mm x 6 mm  Save board space, simplify design and speed time to market with an integrated-inductor power module.
LMQ66430 ACTIVO Convertidor reductor síncrono de 36 V y 3 A de baja EMI con IQ de 1.5 µA Converter with low IQ and smaller in size
LMR54406 ACTIVO Convertidor de potencia bucksincrónico SIMPLE SWITCHER® de 4 V a 36 V, 0.6 A e IQ de 80 µA Newer converter with better feature set

LM2671

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Topology Buck Iout (max) (A) 0.5 Vin (max) (V) 40 Vin (min) (V) 6.5 Vout (max) (V) 37 Vout (min) (V) 1.23 Features Enable, Overcurrent protection Control mode Voltage mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0025 Duty cycle (max) (%) 95
Rating Catalog Topology Buck Iout (max) (A) 0.5 Vin (max) (V) 40 Vin (min) (V) 6.5 Vout (max) (V) 37 Vout (min) (V) 1.23 Features Enable, Overcurrent protection Control mode Voltage mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0025 Duty cycle (max) (%) 95
SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm) PDIP (P) 8 92.5083 mm² (9.81 mm × 9.43 mm) WSON (NHN) 16 25 mm² (5 mm × 5 mm)
  • Efficiency up to 96%
  • Available in 8-Pin SOIC, PDIP, and WSON
    Packages
  • Simple and Easy to Design With
  • Requires Only 5 External Components
  • Uses Readily Available Standard Inductors
  • 3.3-V, 5-V, 12-V, and Adjustable Output Versions
  • Adjustable Version Output Voltage Range: 1.21 V
    to 37 V
  • ±1.5% Maximum Output Voltage Tolerance Over
    Line and Load Conditions
  • Ensured 500-mA Output Load Current
  • 0.25-Ω DMOS Output Switch
  • Wide Input Voltage Range: 8 V to 40 V
  • 260-kHz Fixed Frequency Internal Oscillator
  • TTL Shutdown Capability, Low Power Standby
    Mode
  • Soft-Start and Frequency Synchronization
  • Thermal Shutdown and Current-Limit Protection
  • Efficiency up to 96%
  • Available in 8-Pin SOIC, PDIP, and WSON
    Packages
  • Simple and Easy to Design With
  • Requires Only 5 External Components
  • Uses Readily Available Standard Inductors
  • 3.3-V, 5-V, 12-V, and Adjustable Output Versions
  • Adjustable Version Output Voltage Range: 1.21 V
    to 37 V
  • ±1.5% Maximum Output Voltage Tolerance Over
    Line and Load Conditions
  • Ensured 500-mA Output Load Current
  • 0.25-Ω DMOS Output Switch
  • Wide Input Voltage Range: 8 V to 40 V
  • 260-kHz Fixed Frequency Internal Oscillator
  • TTL Shutdown Capability, Low Power Standby
    Mode
  • Soft-Start and Frequency Synchronization
  • Thermal Shutdown and Current-Limit Protection

The LM2671 series of regulators are monolithic integrated circuits built with a LMDMOS process. These regulators provide all the active functions for a step-down (buck) switching regulator, capable of driving a 500-mA load current with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version.

Requiring a minimum number of external components, these regulators are simple to use and include patented internal frequency compensation, fixed frequency oscillator, external shutdown, soft start, and frequency synchronization.

The LM2671 series operates at a switching frequency of 260 kHz, thus allowing smaller sized filter components than what is required with lower frequency switching regulators. Because of its very high efficiency (> 90%), the copper traces on the printed-circuit board are the only heat sinking required.

A family of standard inductors for use with the LM2671 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies using these advanced ICs. Also included in the data sheet are selector guides for diodes and capacitors designed to work in switch-mode power supplies.

Other features include a ensured ±1.5% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring typically 50-µA standby current. The output switch includes current limiting, as well as thermal shutdown for full protection under fault conditions.

The LM2671 series of regulators are monolithic integrated circuits built with a LMDMOS process. These regulators provide all the active functions for a step-down (buck) switching regulator, capable of driving a 500-mA load current with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version.

Requiring a minimum number of external components, these regulators are simple to use and include patented internal frequency compensation, fixed frequency oscillator, external shutdown, soft start, and frequency synchronization.

The LM2671 series operates at a switching frequency of 260 kHz, thus allowing smaller sized filter components than what is required with lower frequency switching regulators. Because of its very high efficiency (> 90%), the copper traces on the printed-circuit board are the only heat sinking required.

A family of standard inductors for use with the LM2671 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies using these advanced ICs. Also included in the data sheet are selector guides for diodes and capacitors designed to work in switch-mode power supplies.

Other features include a ensured ±1.5% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring typically 50-µA standby current. The output switch includes current limiting, as well as thermal shutdown for full protection under fault conditions.
filter Buscar otro/a Convertidores de CC/CC
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS560430 ACTIVO Convertidor de potencia reductor sincrónico SIMPLE SWITCHER® de 4 V a 36 V y 0.6 A Next-generation 36-V, 600-mA buck regulator with high-efficiency sleep mode.

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 18
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos LM2671 SIMPLE SWITCHER Power Converter High Efficiency 500-mA Step-Down Voltage Regulator With Features datasheet (Rev. L) PDF | HTML 30/06/2016
Nota sobre la aplicación Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 25/03/2024
Nota sobre la aplicación Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 12/09/2014
Nota sobre la aplicación AN-1187 Leadless Leadframe Package (LLP) (Rev. R) 7/05/2013
Nota sobre la aplicación AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 24/04/2013
Nota sobre la aplicación AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 23/04/2013
Nota sobre la aplicación AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 23/04/2013
Nota sobre la aplicación AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 23/04/2013
Nota sobre la aplicación AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 23/04/2013
Nota sobre la aplicación AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 23/04/2013
Nota sobre la aplicación AN-1Positive-to-Negative Buck-Boost Converter Using LM267x SIMPLE SWITCHER (Rev. E) 23/04/2013
Nota sobre la aplicación AN-1197 Selecting Inductors for Buck Converters (Rev. B) 23/04/2013
Nota sobre la aplicación AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 23/04/2013
Nota sobre la aplicación AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 23/04/2013
Nota sobre la aplicación Simple Techniques Minimize Cross-Coupling in Distributed Power Systems 21/03/2007
Nota sobre la aplicación Input and Output Capacitor Selection 19/09/2005
Más documentación SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 12/07/2005
Nota sobre la aplicación AN-643 EMI/RFI Board Design (Rev. B) 3/05/2004

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOIC (D) 8 Ultra Librarian
PDIP (P) 8 Ultra Librarian
WSON (NHN) 16 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos