All trademarks are the property of their respective owners.
The LM2724A is a dual N-channel MOSFET driver which can drive both the top and bottom MOSFETs in a push-pull structure simultaneously. The LM2724A takes a logic input and splits it into two complimentary signals with a typical 20ns dead time in between. The built-in cross-conduction protection circuitry prevents the top and bottom MOSFETs from turning on simultaneously. With a bias voltage of 5V, the peak sourcing and sinking current for each driver of the LM2724A is about 3A. Input UVLO (Under-Voltage-Lock-Out) ensures that all the driver outputs stay low until the supply rail exceeds the power-on threshold during system power on, or after the supply rail drops below power-on threshold by a specified hysteresis during system power down. The cross-conduction protection circuitry detects both driver outputs and will not turn on a driver until the other driver output is low. The top gate voltage needed by the top MOSFET is obtained through an external boot-strap structure. When not switching, the LM2724A only draws up to 195µA from the 5V rail. The synchronization operation of the bottom MOSFET can be disabled by pulling the SYNC pin to ground.
| Documentación principal | Tipo | Título | Opciones de formato | Descargar la versión más reciente en inglés | Fecha |
|---|---|---|---|---|---|
| * | Hoja de datos | LM2724A High Speed 3A Synchronous MOSFET Driver datasheet (Rev. C) | 28/03/2013 | ||
| Nota sobre la aplicación | Using Half-Bridge Gate Driver to Achieve 100% Duty Cycle for High Side FET | PDF | HTML | 25/03/2024 | ||
| Nota sobre la aplicación | Bootstrap Circuitry Selection for Half Bridge Configurations (Rev. A) | PDF | HTML | 8/09/2023 | ||
| Nota sobre la aplicación | Comparative Analysis of Two Different Methods for Gate-Drive Current Boosting (Rev. A) | PDF | HTML | 17/02/2022 | ||
| Application brief | External Gate Resistor Selection Guide (Rev. A) | 28/02/2020 | |||
| Application brief | Understanding Peak IOH and IOL Currents (Rev. A) | 28/02/2020 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI.