Inicio Administración de potencia Controladores LED Controladores para LED de retroiluminación
Inicio
Administración de potencia
Controladores LED
Controladores para LED de retroiluminación

LM2794

ACTIVO

Alimentación LED de capacitor conmutado regulado por corriente con control de brillo analógico y PWM

Haga su pedido ahora
Hoja de datos

LM2794

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 4 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 2.7 Vout (max) (V) 5.5 Type Capacitive Switching frequency (max) (kHz) 675 Duty cycle (max) (%) 100 LED current per channel (mA) 20 Peak efficiency (%) 80 Topology Boost Features Analog/PWM mixed dimming Operating temperature range (°C) -30 to 85 Rating Catalog
Number of channels 4 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 2.7 Vout (max) (V) 5.5 Type Capacitive Switching frequency (max) (kHz) 675 Duty cycle (max) (%) 100 LED current per channel (mA) 20 Peak efficiency (%) 80 Topology Boost Features Analog/PWM mixed dimming Operating temperature range (°C) -30 to 85 Rating Catalog
DSBGA (YPA) 14 5.5845 mm² (— mm × — mm)
  • Regulated Current Sources with ±0.5% Matching between any Two Outputs
  • High Efficiency 3/2 Boost Function
  • Drives One, Two, Three or four White LEDs
  • 2.7V to 5.5V Input Voltage
  • Up to 80mA Output Current
  • Analog Brightness Control
  • Active-Low or High Shutdown Input ('94/95)
  • Very Small Solution Size and no Inductor
  • 2.3µA (typ.) Shutdown Current
  • 325kHz Switching Frequency (min.)
  • Constant Frequency Generates Predictable Noise Spectrum
  • Thin DSBGA Package: 2.08mm X 2.403mm X 0.600mm High

All trademarks are the property of their respective owners.

  • Regulated Current Sources with ±0.5% Matching between any Two Outputs
  • High Efficiency 3/2 Boost Function
  • Drives One, Two, Three or four White LEDs
  • 2.7V to 5.5V Input Voltage
  • Up to 80mA Output Current
  • Analog Brightness Control
  • Active-Low or High Shutdown Input ('94/95)
  • Very Small Solution Size and no Inductor
  • 2.3µA (typ.) Shutdown Current
  • 325kHz Switching Frequency (min.)
  • Constant Frequency Generates Predictable Noise Spectrum
  • Thin DSBGA Package: 2.08mm X 2.403mm X 0.600mm High

All trademarks are the property of their respective owners.

The LM2794/95 is a fractional CMOS charge-pump that provides four regulated current sources. It accepts an input voltage range from 2.7V to 5.5V and maintains a constant current determined by an external sense resistor.

The LM2794/5 delivers up to 80mA of load current to accommodate four White LEDs. The switching frequency is 325kHz. (min.) to keep the conducted noise spectrum away from sensitive frequencies within portable RF devices.

Brightness can be controlled by both linear and PWM techniques. A voltage between 0V and 3.0V may be applied to the BRGT pin to linearly vary the LED current. Alternatively, a PWM signal can be applied to the SD pin to vary the perceived brightness of the LED. The SD pin reduces the operating current to 2.3µA (typ.) The LM2794 is shut down when the SD pin is low, and the LM2795 is shut down when the SD pin is high.

The LM2794/95 is available in a DSBGA CSP package.

The LM2794/95 is a fractional CMOS charge-pump that provides four regulated current sources. It accepts an input voltage range from 2.7V to 5.5V and maintains a constant current determined by an external sense resistor.

The LM2794/5 delivers up to 80mA of load current to accommodate four White LEDs. The switching frequency is 325kHz. (min.) to keep the conducted noise spectrum away from sensitive frequencies within portable RF devices.

Brightness can be controlled by both linear and PWM techniques. A voltage between 0V and 3.0V may be applied to the BRGT pin to linearly vary the LED current. Alternatively, a PWM signal can be applied to the SD pin to vary the perceived brightness of the LED. The SD pin reduces the operating current to 2.3µA (typ.) The LM2794 is shut down when the SD pin is low, and the LM2795 is shut down when the SD pin is high.

The LM2794/95 is available in a DSBGA CSP package.
filter Buscar otro/a Controladores para LED de retroiluminación
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos LM2794,LM2795 Current Reg Switched Cap LED Sup w/Analog & PWM Brightness Control datasheet (Rev. L) 2/05/2013
Informe Common LED Functions and LED Driver Design Considerations 21/09/2020
Nota sobre la aplicación Switched Cap Circuits Provide Efficient and Functional White LED Drive (Rev. B) 30/04/2013

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YPA) 14 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos