Inicio Administración de potencia Reguladores lineales y de baja salida (LDO)

LM340L

ACTIVO

Regulador de tensión lineal de 100 mA y 35 V

Detalles del producto

Rating Catalog Vin (max) (V) 35 Vin (min) (V) 7 Iout (max) (A) 0.1 Output options Fixed Output Vout (max) (V) 15 Vout (min) (V) 5 Fixed output options (V) 5 Noise (µVrms) 40 PSRR at 100 KHz (dB) 43 Iq (typ) (mA) 3 Thermal resistance θJA (°C/W) 232 Load capacitance (min) (µF) 0 Regulated outputs (#) 1 Accuracy (%) 2.5 Dropout voltage (Vdo) (typ) (mV) 2000 Operating temperature range (°C) 0 to 70
Rating Catalog Vin (max) (V) 35 Vin (min) (V) 7 Iout (max) (A) 0.1 Output options Fixed Output Vout (max) (V) 15 Vout (min) (V) 5 Fixed output options (V) 5 Noise (µVrms) 40 PSRR at 100 KHz (dB) 43 Iq (typ) (mA) 3 Thermal resistance θJA (°C/W) 232 Load capacitance (min) (µF) 0 Regulated outputs (#) 1 Accuracy (%) 2.5 Dropout voltage (Vdo) (typ) (mV) 2000 Operating temperature range (°C) 0 to 70
TO-92 (LP) 3 19.136 mm² (5.2 mm × 3.68 mm)
  • Line Regulation of 0.04%/V
  • Load Regulation of 0.01%/mA
  • Output Voltage Tolerances of
    • ±2% at Tj = 25°C and ±4% Over the Temperature Range (LM140LA)
    • ±3% Over the Temperature Range (LM340LA)
  • Output Current of 100 mA
  • Internal Thermal Overload Protection
  • Output Transistor Safe Area Protection
  • Internal Short Circuit Current Limit
  • Available in
    • Metal TO Low Profile Package (LM140LA/LM340LA)
    • Plastic TO-92 (LM340LA)

All trademarks are the property of their respective owners.

  • Line Regulation of 0.04%/V
  • Load Regulation of 0.01%/mA
  • Output Voltage Tolerances of
    • ±2% at Tj = 25°C and ±4% Over the Temperature Range (LM140LA)
    • ±3% Over the Temperature Range (LM340LA)
  • Output Current of 100 mA
  • Internal Thermal Overload Protection
  • Output Transistor Safe Area Protection
  • Internal Short Circuit Current Limit
  • Available in
    • Metal TO Low Profile Package (LM140LA/LM340LA)
    • Plastic TO-92 (LM340LA)

All trademarks are the property of their respective owners.

The LM140L series of three terminal positive regulators is available with several fixed output voltages making them useful in a wide range of applications. The LM140LA is an improved version of the LM78LXX series with a tighter output voltage tolerance (specified over the full military temperature range), higher ripple rejection, better regulation and lower quiescent current. The LM140LA regulators have ±2% VOUT specification, 0.04%/V line regulation, and 0.01%/mA load regulation. When used as a zener diode/resistor combination replacement, the LM140LA usually results in an effective output impedance improvement of two orders of magnitude, and lower quiescent current. These regulators can provide local on card regulation, eliminating the distribution problems associated with single point regulation. The voltages available allow the LM140LA to be used in logic systems, instrumentation, Hi-Fi, and other solid state electronic equipment. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents.

The LM140LA/LM340LA are available in the low profile metal three lead TO (NDT) and the LM340LA are also available in the plastic TO-92 (LP). With adequate heat sinking the regulator can deliver 100 mA output current. Current limiting is included to limit the peak output current to a safe value. Safe area protection for the output transistor is provided to limit internal power dissipation. If internal power dissipation becomes too high for the heat sinking provided, the thermal shut-down circuit takes over, preventing the IC from overheating.

For applications requiring other voltages, see LM117L Data Sheet.

The LM140L series of three terminal positive regulators is available with several fixed output voltages making them useful in a wide range of applications. The LM140LA is an improved version of the LM78LXX series with a tighter output voltage tolerance (specified over the full military temperature range), higher ripple rejection, better regulation and lower quiescent current. The LM140LA regulators have ±2% VOUT specification, 0.04%/V line regulation, and 0.01%/mA load regulation. When used as a zener diode/resistor combination replacement, the LM140LA usually results in an effective output impedance improvement of two orders of magnitude, and lower quiescent current. These regulators can provide local on card regulation, eliminating the distribution problems associated with single point regulation. The voltages available allow the LM140LA to be used in logic systems, instrumentation, Hi-Fi, and other solid state electronic equipment. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents.

The LM140LA/LM340LA are available in the low profile metal three lead TO (NDT) and the LM340LA are also available in the plastic TO-92 (LP). With adequate heat sinking the regulator can deliver 100 mA output current. Current limiting is included to limit the peak output current to a safe value. Safe area protection for the output transistor is provided to limit internal power dissipation. If internal power dissipation becomes too high for the heat sinking provided, the thermal shut-down circuit takes over, preventing the IC from overheating.

For applications requiring other voltages, see LM117L Data Sheet.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Reemplazo con funcionalidad mejorada del dispositivo comparado
UA78L ACTIVO Regulador de tensión lineal de 100 mA y 30 V Pin-to-pin equivalent for cost-sensitive applications
Funcionalidad similar a la del dispositivo comparado
TPS7B81 ACTIVO Regulador de tensión de caída baja (LDO) de 150 mA, sin batería (40 V) e IQ ultrabaja, con activació The TPS7B81 (40-V) delivers ultra-low-IQ and lower dropout voltage
TPS7B69 ACTIVO Regulador de tensión de caída baja de 150 mA, 40 V e IQ baja The TPS7B69 (40-V) delivers lower standby power and dropout voltage
TLV760 ACTIVO Regulador de voltaje de baja caída de 100 mA y 30 V The TLV760 delivers lower dropout voltage and improved load regulation

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 8
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos LM140L/LM340L Series 3-Terminal Positive Regulators datasheet (Rev. B) 20/03/2013
Nota sobre la aplicación A Topical Index of TI LDO Application Notes (Rev. F) 27/06/2019
Nota sobre la aplicación AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B) 6/05/2013
Nota sobre la aplicación AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A) 6/05/2013
Nota sobre la aplicación TO-92 Packing Options / Ordering Instructions (Rev. A) 23/06/2010
Nota sobre la aplicación Packaging Limits Range of Linear Regulators 8/05/2010
Nota sobre la aplicación Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A) 4/06/2008
Nota sobre la aplicación Understanding the Terms and Definitions of LDO Voltage Regulators 21/10/1999

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TO-92 (LP) 3 Ultra Librarian

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos