Inicio Administración de potencia Controladores LED Controladores para LED de retroiluminación
Inicio
Administración de potencia
Controladores LED
Controladores para LED de retroiluminación

LM3538

ACTIVO

Controlador WLED de 6 canales con cuatro LDO integrados

Haga su pedido ahora
Hoja de datos

LM3538

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 6 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 2.7 Vout (max) (V) 5 Type Capacitive Switching frequency (max) (kHz) 1.3 Duty cycle (max) (%) 100 LED current per channel (mA) 25 Peak efficiency (%) 90 Topology Multi-Channel Features Enable/Shutdown, I2C control, PWM control Operating temperature range (°C) -30 to 110 Rating Catalog
Number of channels 6 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 2.7 Vout (max) (V) 5 Type Capacitive Switching frequency (max) (kHz) 1.3 Duty cycle (max) (%) 100 LED current per channel (mA) 25 Peak efficiency (%) 90 Topology Multi-Channel Features Enable/Shutdown, I2C control, PWM control Operating temperature range (°C) -30 to 110 Rating Catalog
DSBGA (YFQ) 30 5.71999999999999912 mm² (— mm × — mm)

    Lighting:

  • 6-channel Backlight Capability
  • Internal ALS Engine; PWM Input to Support CABC
  • Built-in Power Supply and Gain Control for Ambient Light Sensor
  • Up to 90% Efficiency
  • Adaptive Charge Pump with 1x and 1.5x Gains for Maximum Efficiency
  • 128 Dimming Steps for Group A, Exponential or Linear Dimming Selectable by Register Setup
  • 8 Linear Dimming States for Group B

    • LDOs:

  • 4 Programmable LDOs (300mA/150mA Output Currents)
  • Default Startup Voltage States
  • Low Dropout Voltage: 100mV typ. at 150mA Load Current
  • LDO Input Voltage = 1.8V to VIN_A
  • Overload Protection

    • Combined Common Features:

  • Wide Input Voltage Range: 2.7V to 5.5V
  • I2C-compatible Serial Interface
  • 2 General-purpose Outputs

All trademarks are the property of their respective owners.

    Lighting:

  • 6-channel Backlight Capability
  • Internal ALS Engine; PWM Input to Support CABC
  • Built-in Power Supply and Gain Control for Ambient Light Sensor
  • Up to 90% Efficiency
  • Adaptive Charge Pump with 1x and 1.5x Gains for Maximum Efficiency
  • 128 Dimming Steps for Group A, Exponential or Linear Dimming Selectable by Register Setup
  • 8 Linear Dimming States for Group B

    • LDOs:

  • 4 Programmable LDOs (300mA/150mA Output Currents)
  • Default Startup Voltage States
  • Low Dropout Voltage: 100mV typ. at 150mA Load Current
  • LDO Input Voltage = 1.8V to VIN_A
  • Overload Protection

    • Combined Common Features:

  • Wide Input Voltage Range: 2.7V to 5.5V
  • I2C-compatible Serial Interface
  • 2 General-purpose Outputs

All trademarks are the property of their respective owners.

The LM3538 is a highly integrated LED driver capable of driving 6 LEDs in parallel for single display backlighting applications. Independent LED control allows for a subset of the main display LEDs to be selected for partial illumination applications.

I2C-compatible control allows full configurability of the backlighting function. The LM3538 provides multi-zone Ambient Light Sensing allowing autonomous backlight intensity control in the event of changing ambient light conditions. A PWM input is also provided to give the user a means to adjust the backlight intensity dynamically based upon the content of the display.

Four integrated LDOs are fully configurable through I2C capable of addressing point-of-load regulation needs for functions such as integrated camera modules. The LDOs can be powered from main battery source, or by a fixed output voltage of an external buck converter (post regulation) leading to higher conversion efficiency.

The LM3538 provides excellent efficiency without the use of an inductor by operating the charge pump in a gain of 3/2 or in Pass-Mode. The proper gain for maintaining current regulation is chosen, based on LED forward voltage, so that efficiency is maximized over the input voltage range

LM3538 is offered in a tiny 30-bump DSBGA package.

The LM3538 is a highly integrated LED driver capable of driving 6 LEDs in parallel for single display backlighting applications. Independent LED control allows for a subset of the main display LEDs to be selected for partial illumination applications.

I2C-compatible control allows full configurability of the backlighting function. The LM3538 provides multi-zone Ambient Light Sensing allowing autonomous backlight intensity control in the event of changing ambient light conditions. A PWM input is also provided to give the user a means to adjust the backlight intensity dynamically based upon the content of the display.

Four integrated LDOs are fully configurable through I2C capable of addressing point-of-load regulation needs for functions such as integrated camera modules. The LDOs can be powered from main battery source, or by a fixed output voltage of an external buck converter (post regulation) leading to higher conversion efficiency.

The LM3538 provides excellent efficiency without the use of an inductor by operating the charge pump in a gain of 3/2 or in Pass-Mode. The proper gain for maintaining current regulation is chosen, based on LED forward voltage, so that efficiency is maximized over the input voltage range

LM3538 is offered in a tiny 30-bump DSBGA package.
filter Buscar otro/a Controladores para LED de retroiluminación
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos LM3538 6-Channel WLED Driver with Four Integrated LDOs datasheet (Rev. A) 3/05/2013
Informe Common LED Functions and LED Driver Design Considerations 21/09/2020
Guía de selección Power Management Guide 2018 (Rev. R) 25/06/2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YFQ) 30 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos