LM48560

ACTIVO

Controlador de altavoz cerámico mono de entrada analógica, con control I2C y refuerzo integrado de C

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat LM48560 Boomer™ Audio Power Amplifier Series High Voltage Class H Ceramic Speaker Driver With Automatic Level Control datasheet (Rev. F) (Inglés) PDF | HTML

LM48560

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Features

Very low power consumption

Haptic actuator type

Piezo

Input signal

Analog

Output voltage (max) (V)

30

Shutdown current (ISD) (µA)

0.1

Boost voltage (max) (V)

30

Vs (max) (V)

5.5

Vs (min) (V)

2.7

Operating temperature range (°C)

-40 to 85

Rating

Catalog

Features

Very low power consumption

Haptic actuator type

Piezo

Input signal

Analog

Output voltage (max) (V)

30

Shutdown current (ISD) (µA)

0.1

Boost voltage (max) (V)

30

Vs (max) (V)

5.5

Vs (min) (V)

2.7

Operating temperature range (°C)

-40 to 85

Rating

Catalog

DSBGA (YZR)

16

5.0625 mm² (— mm × — mm)

Class H Topology
Integrated Boost Converter
Bridge-Tied Load (BTL) Output
Selectable Differential Inputs
Selectable Control Interfaces
- (Hardware or Software mode)
I²C Programmable ALC
Low Supply Current
Minimum External Components
Micro-Power Shutdown
Available in Space-Saving DSBGA Package
Key Specifications:
- Output Voltage at V_DD = 3.6 V,
  R_L = 1.5 µF + 10 Ω, THD+N ≤ 1%
  - 30 V_P-P(Typical)
- Quiescent Power Supply Current
  at 3.6 V (ALC Enabled)
  - 4 mA (Typical)
- Power Dissipation at 25 V_P–P, 1 W (Typical)
- Shutdown Current, 0.1 µA (Typical)

Class H Topology
Integrated Boost Converter
Bridge-Tied Load (BTL) Output
Selectable Differential Inputs
Selectable Control Interfaces
- (Hardware or Software mode)
I²C Programmable ALC
Low Supply Current
Minimum External Components
Micro-Power Shutdown
Available in Space-Saving DSBGA Package
Key Specifications:
- Output Voltage at V_DD = 3.6 V,
  R_L = 1.5 µF + 10 Ω, THD+N ≤ 1%
  - 30 V_P-P(Typical)
- Quiescent Power Supply Current
  at 3.6 V (ALC Enabled)
  - 4 mA (Typical)
- Power Dissipation at 25 V_P–P, 1 W (Typical)
- Shutdown Current, 0.1 µA (Typical)

The LM48560 device is a high voltage, high efficiency, Class H driver for ceramic speakers and piezo actuators. The LM48560 device’s Class H architecture offers significant power savings compared to traditional Class AB amplifiers. The device provides 30 V_P–P output drive while consuming just 4 mA of quiescent current from a 3.6 V supply.

The LM48560 device features TI’s unique automatic level control (ALC) that provides output limiter functionality. The LM48560 device features two fully differential inputs with separate gain settings, and a selectable control interface. In software control mode, the gain control and device modes are configured through the I²C interface. In hardware control mode, the gain and input mux are configured through a pair of logic inputs.

The LM48560 device has a low power shutdown mode that reduces quiescent current consumption to 0.1 µA. The LM48560 device is available in an ultra-small 16-bump DSBGA package (1.97 mm × 1.97 mm).

The LM48560 device is a high voltage, high efficiency, Class H driver for ceramic speakers and piezo actuators. The LM48560 device’s Class H architecture offers significant power savings compared to traditional Class AB amplifiers. The device provides 30 V_P–P output drive while consuming just 4 mA of quiescent current from a 3.6 V supply.

The LM48560 device features TI’s unique automatic level control (ALC) that provides output limiter functionality. The LM48560 device features two fully differential inputs with separate gain settings, and a selectable control interface. In software control mode, the gain control and device modes are configured through the I²C interface. In hardware control mode, the gain and input mux are configured through a pair of logic inputs.

The LM48560 device has a low power shutdown mode that reduces quiescent current consumption to 0.1 µA. The LM48560 device is available in an ultra-small 16-bump DSBGA package (1.97 mm × 1.97 mm).

filter

Buscar otro/a Drivers piezoeléctricos

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 1

Documentación principal	Tipo	Título	Opciones de formato	Descargar la versión más reciente en inglés	Fecha
*	Hoja de datos	LM48560 Boomer™ Audio Power Amplifier Series High Voltage Class H Ceramic Speaker Driver With Automatic Level Control datasheet (Rev. F)	PDF \| HTML		3/12/2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LM48560TLEVAL — Controlador de altavoz cerámico de Clase H de alta tensión con control de nivel automático

The LM48560TLEVAL provides an evaluation platform for the LM48560. The LM48560 is a high voltage, high efficiency, Class H driverfor ceramic speakers and piezo actuators. The LM48560's Class H architecture offers significant power savings compared to traditional Class AB amplifiers. The device (...)

Guía del usuario: PDF

Productos y hardware compatibles

En inventario

Límite:

Inicie sesión para hacer un pedido

lock

Iniciar sesión para ver el inventario

??asset.out-of-stock-ti_es_MX??

No disponible

GUI para el módulo de evaluación (EVM)