LM5122ZA

ACTIVO

Controlador elevador síncrono con modo de corriente de VIN amplia de 3 V-65 V y capacidad multifásic

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat LM5122ZA Wide-Input Synchronous Boost Controller With Multiple Phase Capability datasheet (Rev. A) (Inglés) PDF | HTML

LM5122ZA

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Topology

Boost, Flyback, Forward, SEPIC

Vin (max) (V)

65

Vin (min) (V)

3

Vout (max) (V)

100

Vout (min) (V)

3

Control mode

current mode

Features

Enable, Frequency synchronization, Phase interleaving, Synchronous rectification, UVLO adjustable

Duty cycle (max) (%)

100

Iq (typ) (A)

0.004

Operating temperature range (°C)

-40 to 125

Rating

Catalog

Topology

Boost, Flyback, Forward, SEPIC

Vin (max) (V)

65

Vin (min) (V)

3

Vout (max) (V)

100

Vout (min) (V)

3

Control mode

current mode

Features

Enable, Frequency synchronization, Phase interleaving, Synchronous rectification, UVLO adjustable

Duty cycle (max) (%)

100

Iq (typ) (A)

0.004

Operating temperature range (°C)

-40 to 125

HTSSOP (PWP)

24

49.92 mm² (7.8 mm × 6.4 mm)

Maximum Input Voltage: 65 V
Minimum Input Voltage: 3 V (4.5 V for Start-Up)
Output Voltage up to 100 V
Bypass (V_OUT = V_IN) Operation
1.2-V Reference with ±1% Accuracy
Free-Run and Synchronizable Switching to 1 MHz
Peak-Current-Mode Control
Robust 3-A Integrated Gate Drivers
Adaptive Dead-Time Control
Optional Diode-Emulation Mode
Programmable Cycle-by-Cycle Current Limit
Hiccup-Mode Overload Protection
Programmable Line UVLO
Programmable Soft Start
Thermal Shutdown Protection
Low Shutdown Quiescent Current: 9 µA
Programmable Slope Compensation
Programmable Skip-Cycle Mode Reduces Standby Power
Allows External VCC Supply
Inductor DCR Current Sensing Capability
Multi-phase Capability
Thermally Enhanced 24-Pin HTSSOP

Maximum Input Voltage: 65 V
Minimum Input Voltage: 3 V (4.5 V for Start-Up)
Output Voltage up to 100 V
Bypass (V_OUT = V_IN) Operation
1.2-V Reference with ±1% Accuracy
Free-Run and Synchronizable Switching to 1 MHz
Peak-Current-Mode Control
Robust 3-A Integrated Gate Drivers
Adaptive Dead-Time Control
Optional Diode-Emulation Mode
Programmable Cycle-by-Cycle Current Limit
Hiccup-Mode Overload Protection
Programmable Line UVLO
Programmable Soft Start
Thermal Shutdown Protection
Low Shutdown Quiescent Current: 9 µA
Programmable Slope Compensation
Programmable Skip-Cycle Mode Reduces Standby Power
Allows External VCC Supply
Inductor DCR Current Sensing Capability
Multi-phase Capability
Thermally Enhanced 24-Pin HTSSOP

The LM5122ZA is a multi-phase capable synchronous boost controller intended for high-efficiency synchronous boost regulator applications. The control method is based upon peak-current-mode control. Current-mode control provides inherent line feed forward, cycle-by-cycle current limiting, and ease of loop compensation.

The switching frequency is programmable up to 1 MHz. Higher efficiency is achieved by two robust N-channel MOSFET gate drivers with adaptive dead-time control. A user-selectable diode-emulation mode also enables discontinuous-mode operation for improved efficiency at light load conditions.

An internal charge pump allows 100% duty cycle for high-side synchronous switch (bypass operation). A 180° phase shifted clock output enables easy multi-phase interleaved configuration. Additional features include thermal shutdown, frequency synchronization, hiccup-mode current limit, and adjustable line undervoltage lockout.

The LM5122ZA is a multi-phase capable synchronous boost controller intended for high-efficiency synchronous boost regulator applications. The control method is based upon peak-current-mode control. Current-mode control provides inherent line feed forward, cycle-by-cycle current limiting, and ease of loop compensation.

The switching frequency is programmable up to 1 MHz. Higher efficiency is achieved by two robust N-channel MOSFET gate drivers with adaptive dead-time control. A user-selectable diode-emulation mode also enables discontinuous-mode operation for improved efficiency at light load conditions.

An internal charge pump allows 100% duty cycle for high-side synchronous switch (bypass operation). A 180° phase shifted clock output enables easy multi-phase interleaved configuration. Additional features include thermal shutdown, frequency synchronization, hiccup-mode current limit, and adjustable line undervoltage lockout.

filter

Buscar otro/a Controladores de CC/CC

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

LM5123-Q1

ACTIVO

Controlador elevador síncrono con VIN amplia de 2.2 MHz y baja IQ LM5123-Q1 is a newer version with higher 2.2-MHz switching frequency

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 3

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	LM5122ZA Wide-Input Synchronous Boost Controller With Multiple Phase Capability datasheet (Rev. A)	PDF \| HTML	7/11/2018
	Informe	An overview of radiated EMI specifications for power supplies		5/06/2018
	Informe	An overview of conducted EMI specifications for power supplies		1/02/2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación