LMX1906-SP

ACTIVO

Búfer, multiplicador y divisor de 15 GHz con protección contra la radiación (RHA), con señal SYSREF

Detalles del producto

Frequency (max) (MHz) 15000 Frequency (min) (MHz) 300 Features Integrated multiplier and divider modes, JESD204B/C SYSREF support, Phase synchronization, RF clock distribution, Radiation hardened, Space Qualified, Space grade, Ultra-low additive jitter Current consumption (mA) 405 Integrated VCO No Operating temperature range (°C) -55 to 125 Rating Space Lock time (µs) (typ) (s) Loop BW dependent
Frequency (max) (MHz) 15000 Frequency (min) (MHz) 300 Features Integrated multiplier and divider modes, JESD204B/C SYSREF support, Phase synchronization, RF clock distribution, Radiation hardened, Space Qualified, Space grade, Ultra-low additive jitter Current consumption (mA) 405 Integrated VCO No Operating temperature range (°C) -55 to 125 Rating Space Lock time (µs) (typ) (s) Loop BW dependent
HTQFP (PAP) 64 144 mm² 12 x 12
  • SMD #5962-23202
    • Total ionizing dose 100krad (ELDRS-free)
    • Single event latch-up (SEL) immune up to 87MeV - cm2 /mg
    • Single event functional interrupt (SEFI) immune up to 87MeV - cm2 /mg
  • Clock buffer for 300MHz to 15GHz frequency
  • Ultra-Low Noise
    • Noise floor of –159dBc/Hz at 6GHz output
    • 36-fs additive jitter (100Hz to fCLK) at 6GHz output
    • 5fs additive jitter (100Hz - 100MHz)
  • 4 high-frequency clocks with corresponding SYSREF outputs
    • Shared divide by 1 (Buffer), 2, 3, 4, 5, and 7
    • Shared programmable multiplier x2, x3, and x4
  • Support pin mode options to configure the device without SPI
  • LOGICLK output with corresponding SYSREF output
    • On separate divide bank
    • 1, 2, 4 pre-divider
    • 1 (bypass), 2, …, 1023 post divider
  • 8 programmable output power levels
  • Synchronized SYSREF clock outputs
    • 508 delay step adjustments of less than 2.5ps each at 12.8GHz
    • Generator and repeater modes
    • Windowing feature for SYSREFREQ pins to optimize timing
  • SYNC feature to all divides and multiple devices
  • 2.5V operating voltage
  • –55ºC to 125ºC operating temperature
  • SMD #5962-23202
    • Total ionizing dose 100krad (ELDRS-free)
    • Single event latch-up (SEL) immune up to 87MeV - cm2 /mg
    • Single event functional interrupt (SEFI) immune up to 87MeV - cm2 /mg
  • Clock buffer for 300MHz to 15GHz frequency
  • Ultra-Low Noise
    • Noise floor of –159dBc/Hz at 6GHz output
    • 36-fs additive jitter (100Hz to fCLK) at 6GHz output
    • 5fs additive jitter (100Hz - 100MHz)
  • 4 high-frequency clocks with corresponding SYSREF outputs
    • Shared divide by 1 (Buffer), 2, 3, 4, 5, and 7
    • Shared programmable multiplier x2, x3, and x4
  • Support pin mode options to configure the device without SPI
  • LOGICLK output with corresponding SYSREF output
    • On separate divide bank
    • 1, 2, 4 pre-divider
    • 1 (bypass), 2, …, 1023 post divider
  • 8 programmable output power levels
  • Synchronized SYSREF clock outputs
    • 508 delay step adjustments of less than 2.5ps each at 12.8GHz
    • Generator and repeater modes
    • Windowing feature for SYSREFREQ pins to optimize timing
  • SYNC feature to all divides and multiple devices
  • 2.5V operating voltage
  • –55ºC to 125ºC operating temperature

The LMX1906-SP is an buffer, divider and multiplier that features high frequency, ultra-low jitter, and SYSREF outputs. This device combined with an ultra-low noise reference clock source is an exemplary design for clocking data converters, especially when sampling above 3GHz. Each of the 4 high frequency clock outputs and additional LOGICLK output is paired with a SYSREF output clock signal. The SYSREF signal for JESD interfaces can either be internally generated or passed in as an input and re-clocked to the device clocks. This device can distribute the multichannel, low skew, ultra-low noise local oscillator signals to multiple mixers by disabling the SYSREF outputs.

The LMX1906-SP is an buffer, divider and multiplier that features high frequency, ultra-low jitter, and SYSREF outputs. This device combined with an ultra-low noise reference clock source is an exemplary design for clocking data converters, especially when sampling above 3GHz. Each of the 4 high frequency clock outputs and additional LOGICLK output is paired with a SYSREF output clock signal. The SYSREF signal for JESD interfaces can either be internally generated or passed in as an input and re-clocked to the device clocks. This device can distribute the multichannel, low skew, ultra-low noise local oscillator signals to multiple mixers by disabling the SYSREF outputs.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
LMK04832-SP ACTIVO Limpiador de fluctuaciones de reloj de 3.2 GHz y 15 salidas con protección contra la radiación (RHA) With JESD204 plus additional jitter cleaner and lower frequency
LMX2615-SP ACTIVO Sintetizador de banda ancha de 40 MHz a 15 GHz con sincronización de fase y soporte JESD204B, de gra Up to 15GHz synthesizer and JESD support

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 6
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet LMX1906-SP Space Grade Low-Noise, High-Frequency JESD204B/C Buffer, Multiplier and Divider datasheet (Rev. A) PDF | HTML 20 may 2025
* Radiation & reliability report LMX1906-SP Total Ionizing Dose Report PDF | HTML 05 ene 2024
* Radiation & reliability report LMX1906-SP Single Event Effects Report 15 nov 2023
Application brief DLA Approved Optimizations for QML Products (Rev. C) PDF | HTML 17 jun 2025
Application note Practical Clocking Considerations That Give Your Next High-Speed Converter Design an Edge (Rev. A) PDF | HTML 11 abr 2025
Certificate LMX1906EVM-CVAL EU Declaration of Conformity (DoC) 14 sep 2023

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LMX1906EVM-CVAL — Módulo de evaluación LMX1906-SP

El módulo de evaluación (EVM) LMX1906-SP está diseñado para evaluar el rendimiento del LMX1906-SP, que es un búfer, divisor y multiplicador de radiofrecuencia (RF) de cuatro salidas y fluctuación aditiva ultrabaja. El dispositivo puede almacenar frecuencias de RF de hasta 18 GHz, multiplicar (...)
Guía del usuario: PDF | HTML
Soporte de software

TICSPRO-SW TICS Pro GUI and Live Programming Tool for Clocking Devices

Texas Instruments clocks and synthesizers (TICS) pro software is used to program the evaluation modules (EVMs) for product numbers with these prefixes: CDC, LMK and LMX. These products include phase-locked loops and voltage-controlled oscillators (PLL+VCO), synthesizers and clocking devices.

Productos y hardware compatibles

Productos y hardware compatibles

Opciones de descarga
Modelo de simulación

LMX1906-SP IBIS Model

SNAM300.ZIP (61 KB) - IBIS Model
Herramienta de diseño

PLLATINUMSIM-SW PLLatinum Sim Tool

PLLATINUMSIM-SW is a simulation tool that allows users to create detailed designs and simulations of our PLLatinum™ integrated circuits, which include the LMX series of phase-locked loops (PLLs) and synthesizers.

Productos y hardware compatibles

Productos y hardware compatibles

Opciones de descarga
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTQFP (PAP) 64 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos