Inicio Gestión de la energía Controladores LED Drivers LED RGB

LP5520

ACTIVO

Controlador LED RGB de retroiluminación

Detalles del producto

Number of channels 3 LED current per channel (mA) 60 LED configuration Parallel, Series Program memory No Topology Boost Programmable ramp control No Vin (min) (V) 2.9 Vin (max) (V) 5.5 Iout (max) (A) 0.18 Features Analog/PWM mixed dimming, Constant current, Current control, I2C control Iq (typ) (mA) 0.9 Shutdown current (ISD) (typ) (µA) 1 Operating temperature range (°C) -30 to 85 Rating Catalog
Number of channels 3 LED current per channel (mA) 60 LED configuration Parallel, Series Program memory No Topology Boost Programmable ramp control No Vin (min) (V) 2.9 Vin (max) (V) 5.5 Iout (max) (A) 0.18 Features Analog/PWM mixed dimming, Constant current, Current control, I2C control Iq (typ) (mA) 0.9 Shutdown current (ISD) (typ) (µA) 1 Operating temperature range (°C) -30 to 85 Rating Catalog
DSBGA (YZR) 25 7.5625 mm² 2.75 x 2.75
  • Temperature Compensated LED Intensity and Color
  • Individual Calibration Coefficients for Each Color
  • Color Accuracy ΔX and ΔY ≤ 0.003
  • 12-Bit ADC for Measurement of 2 Sensors
  • Adjustable Current Outputs for Red, Green, and Blue (RGB) LED
  • 0.2% Typical LED Output Current Matching
  • PWM Control Inputs for Each Color
  • SPI and I2C-Compatible Interface
  • Stand-Alone Mode With One-Wire Control
  • Sequential Mode for One Color at a Time
  • Magnetic High Efficiency Boost Converter
  • Programmable Output Voltage from 5 V to 20 V
  • Adaptive Output Voltage Control Option
  • < 2-µA Typical Shutdown Current
  • Temperature Compensated LED Intensity and Color
  • Individual Calibration Coefficients for Each Color
  • Color Accuracy ΔX and ΔY ≤ 0.003
  • 12-Bit ADC for Measurement of 2 Sensors
  • Adjustable Current Outputs for Red, Green, and Blue (RGB) LED
  • 0.2% Typical LED Output Current Matching
  • PWM Control Inputs for Each Color
  • SPI and I2C-Compatible Interface
  • Stand-Alone Mode With One-Wire Control
  • Sequential Mode for One Color at a Time
  • Magnetic High Efficiency Boost Converter
  • Programmable Output Voltage from 5 V to 20 V
  • Adaptive Output Voltage Control Option
  • < 2-µA Typical Shutdown Current

The LP5520 is an RGB backlight LED driver for small format color LCDs. RGB backlights enable better colors on the display and power savings compared with white LED backlights. The device offers a small and simple driver solution without need for optical feedback. Calibration in display module production can be done in one temperature. The LP5520 produces true white light over a wide temperature range. Three independent LED drivers have accurate programmable current sinks and PWM modulation control. Using internal calibration memory and external temperature sensor, the RGB LED currents are adjusted for perfect white balance independent of the brightness setting or temperature. The user programmable calibration memory has intensity vs temperature data for each color. This white balance calibration data can be programmed to the memory on the production line of a backlight module.

The device has a magnetic boost converter that creates a supply voltage of up to 20 V LED from the battery voltage. The output can be set at 1-V steps from 5 V to 20 V. In adaptive mode the circuit automatically adjusts the output voltage to minimum sufficient level for lowest power consumption. Temperature is measured using an external temperature sensor placed close to the LEDs. The second ADC input can be used, for example, for ambient light measurement.

For all available packages, see the orderable addendum at the end of the data sheet.

The LP5520 is an RGB backlight LED driver for small format color LCDs. RGB backlights enable better colors on the display and power savings compared with white LED backlights. The device offers a small and simple driver solution without need for optical feedback. Calibration in display module production can be done in one temperature. The LP5520 produces true white light over a wide temperature range. Three independent LED drivers have accurate programmable current sinks and PWM modulation control. Using internal calibration memory and external temperature sensor, the RGB LED currents are adjusted for perfect white balance independent of the brightness setting or temperature. The user programmable calibration memory has intensity vs temperature data for each color. This white balance calibration data can be programmed to the memory on the production line of a backlight module.

The device has a magnetic boost converter that creates a supply voltage of up to 20 V LED from the battery voltage. The output can be set at 1-V steps from 5 V to 20 V. In adaptive mode the circuit automatically adjusts the output voltage to minimum sufficient level for lowest power consumption. Temperature is measured using an external temperature sensor placed close to the LEDs. The second ADC input can be used, for example, for ambient light measurement.

For all available packages, see the orderable addendum at the end of the data sheet.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet LP5520 RGB Backlight LED Driver datasheet (Rev. B) PDF | HTML 17 mar 2016
White paper Common LED Functions and LED Driver Design Considerations 21 sep 2020
Application note How to Select a RGB LED Driver 08 ago 2019
Application note Color-Management LED Drivers Have a Bright Future 20 jun 2007

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YZR) 25 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos