Inicio Administración de potencia Controladores de compuertas Drivers del lado de tierra

SN75374

ACTIVO

Controlador de puerta de 4 canales de 10 mA/40 mA con dos entradas NAND para cada salida

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
UCC27624 ACTIVO 30V VDD, 10A/10A dual-channel low-side driver with 4V UVLO and low propagation delay More recent driver with higher drive current and wider supply voltages

Detalles del producto

Number of channels 4 Power switch MOSFET Peak output current (A) 0.5 Input supply voltage (min) (V) 4.75 Input supply voltage (max) (V) 7 Features Low Quiescent Current Operating temperature range (°C) 0 to 70 Rise time (ns) 20 Fall time (ns) 20 Propagation delay time (µs) 0.06 Input threshold TTL Channel input logic Inverting Input negative voltage (V) 0 Rating Catalog Driver configuration Quad inputs
Number of channels 4 Power switch MOSFET Peak output current (A) 0.5 Input supply voltage (min) (V) 4.75 Input supply voltage (max) (V) 7 Features Low Quiescent Current Operating temperature range (°C) 0 to 70 Rise time (ns) 20 Fall time (ns) 20 Propagation delay time (µs) 0.06 Input threshold TTL Channel input logic Inverting Input negative voltage (V) 0 Rating Catalog Driver configuration Quad inputs
PDIP (N) 16 181.42 mm² 19.3 x 9.4 SOIC (D) 16 59.4 mm² 9.9 x 6
  • Quadruple Circuits Capable of Driving High-Capacitance Loads at High Speeds
  • Output Supply Voltage Range From 5 V to 24 V
  • Low Standby Power Dissipation
  • VCC3 Supply Maximizes Output Source Voltage
  • Quadruple Circuits Capable of Driving High-Capacitance Loads at High Speeds
  • Output Supply Voltage Range From 5 V to 24 V
  • Low Standby Power Dissipation
  • VCC3 Supply Maximizes Output Source Voltage

The SN75374 is a quadruple NAND interface circuit designed to drive power MOSFETs from TTL inputs. It provides the high current and voltage necessary to drive large capacitive loads at high speeds.

The outputs can be switched very close to the VCC2 supply rail when VCC3 is about 3 V higher than VCC2. VCC3 can also be tied directly to VCC2 when the source voltage requirements are lower.

The SN75374 is a quadruple NAND interface circuit designed to drive power MOSFETs from TTL inputs. It provides the high current and voltage necessary to drive large capacitive loads at high speeds.

The outputs can be switched very close to the VCC2 supply rail when VCC3 is about 3 V higher than VCC2. VCC3 can also be tied directly to VCC2 when the source voltage requirements are lower.

Descargar

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
UCC27444 ACTIVO 20V VDD, 4A/4A dual-channel low-side driver with -5V input capability and enable More recent driver with higher drive current and wider supply voltages

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet SN75374 datasheet (Rev. A) 05 nov 2004

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​