TMUX8109

ACTIVO

Multiplexores dobles 4:1 de 100 V, RON plano, con inmunidad al bloqueo y lógica de 1.8 V

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TMUX810x 100-V, Flat RON, Single 8:1 and Dual 4:1 Multiplexers with Latch-Up Immunity and 1.8-V Logic datasheet (Rev. B) (Inglés) PDF | HTML

TMUX8109

ACTIVO

Haga su pedido ahora

Detalles del producto

Configuration

4:1

Number of channels

2

Power supply voltage - single (V)

12, 16, 20, 36, 44, 72, 100

Power supply voltage - dual (V)

+/-10, +/-15, +/-18, +/-22, +/-36, +/-50

Protocols

Analog

Ron (typ) (Ω)

38

CON (typ) (pF)

12

ON-state leakage current (max) (µA)

0.04

Supply current (typ) (µA)

250

Bandwidth (MHz)

380

Operating temperature range (°C)

-40 to 125

Features

1.8-V compatible control inputs, Break-before-make, Fail-safe logic, Integrated pulldown resistor on logic pin

Input/output continuous current (max) (A)

0.05

Rating

Catalog

Drain supply voltage (max) (V)

50

Negative rail supply voltage (max) (V)

-50

Configuration

4:1

Number of channels

2

Power supply voltage - single (V)

12, 16, 20, 36, 44, 72, 100

Power supply voltage - dual (V)

+/-10, +/-15, +/-18, +/-22, +/-36, +/-50

Protocols

Analog

Ron (typ) (Ω)

38

CON (typ) (pF)

12

ON-state leakage current (max) (µA)

0.04

Supply current (typ) (µA)

250

Bandwidth (MHz)

380

Operating temperature range (°C)

-40 to 125

Features

1.8-V compatible control inputs, Break-before-make, Fail-safe logic, Integrated pulldown resistor on logic pin

Input/output continuous current (max) (A)

0.05

Rating

Catalog

Drain supply voltage (max) (V)

50

Negative rail supply voltage (max) (V)

-50

WQFN (RUM)

16

16 mm² (4 mm × 4 mm)

TSSOP (PW)

16

32 mm² (5 mm × 6.4 mm)

High supply voltage capable:
- Dual supply: ±10 V to ±50 V
- Single supply: 10 V to 100 V
- Asymmetric dual supply operation
Consistent parametrics across supply voltages
Latch-up immune
Low crosstalk: –110 dB
Low input leakage: 40 pA
Low on resistance flatness: 0.5 Ω
Removes need for additional logic rail (V L)
1.8 V Logic capable
Fail-safe logic: up to 48 V independent of supply
Integrated pull-down resistor on logic pins
Bidirectional signal path
Break-before-make switching
Wide operating temperature T A: –40°C to 125°C
Industry-standard TSSOP and smaller WQFN packages

High supply voltage capable:
- Dual supply: ±10 V to ±50 V
- Single supply: 10 V to 100 V
- Asymmetric dual supply operation
Consistent parametrics across supply voltages
Latch-up immune
Low crosstalk: –110 dB
Low input leakage: 40 pA
Low on resistance flatness: 0.5 Ω
Removes need for additional logic rail (V L)
1.8 V Logic capable
Fail-safe logic: up to 48 V independent of supply
Integrated pull-down resistor on logic pins
Bidirectional signal path
Break-before-make switching
Wide operating temperature T A: –40°C to 125°C
Industry-standard TSSOP and smaller WQFN packages

The TMUX8108 and TMUX8109 are modern high voltage capable analog multiplexers in 8:1 (single ended) and 4:1 (differential) configurations. The devices work well with dual supplies, a single supply, or asymmetric supplies up to a maximum supply voltage of 100 V. The TMUX810x devices provide consistent analog parametric performance across the entire supply voltage range. The TMUX8108 and TMUX8109 support bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins.

All logic inputs support logic levels of 1.8 V, 3.3 V, 5 V and can be connected as high as 48 V, allowing for system flexibility with control signal voltage. Fail-safe logic circuitry allows voltages on the logic pins to be applied before the supply pin, protecting the device from potential damage.

The device family provides latch-up immunity, preventing undesirable high current events between parasitic structures within the device. A latch-up condition typically continues until the power supply rails are turned off and can lead to device failure. The latch-up immunity feature allows this family of multiplexers to be used in harsh environments.

The TMUX8108 and TMUX8109 are modern high voltage capable analog multiplexers in 8:1 (single ended) and 4:1 (differential) configurations. The devices work well with dual supplies, a single supply, or asymmetric supplies up to a maximum supply voltage of 100 V. The TMUX810x devices provide consistent analog parametric performance across the entire supply voltage range. The TMUX8108 and TMUX8109 support bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins.

All logic inputs support logic levels of 1.8 V, 3.3 V, 5 V and can be connected as high as 48 V, allowing for system flexibility with control signal voltage. Fail-safe logic circuitry allows voltages on the logic pins to be applied before the supply pin, protecting the device from potential damage.

The device family provides latch-up immunity, preventing undesirable high current events between parasitic structures within the device. A latch-up condition typically continues until the power supply rails are turned off and can lead to device failure. The latch-up immunity feature allows this family of multiplexers to be used in harsh environments.

filter

Buscar otro/a Interruptores y multiplexores analógicos y de precisión

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Pin por pin con la misma funcionalidad que el dispositivo comparado

TMUX6209

ACTIVO

Multiplexor de 36 V, bajo RON, 4:1 y 2 canales con control lógico de 1.8 V Pin-to-pin replacement with mid-voltage 44-V, ±22V supply voltage support

TMUX7209

ACTIVO

Multiplexor de precisión de 44 V, 4:1 y 2 canales con inmunidad de bloqueo y lógica de 1.8 V Pin-to-pin replacement with mid-voltage 44-V, ±22V supply voltage support

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 4

Documentación principal	Tipo	Título	Opciones de formato
*	Hoja de datos	TMUX810x 100-V, Flat RON, Single 8:1 and Dual 4:1 Multiplexers with Latch-Up Immunity and 1.8-V Logic datasheet (Rev. B)	PDF \| HTML	3/08/2023
	Nota sobre la aplicación	How to Handle High Voltage Common Mode Applications using Multiplexers	PDF \| HTML	3/10/2022
	Product overview	PLC Analog Input Front-End Architectures	PDF \| HTML	31/07/2022
	Nota sobre la aplicación	Guarding in Multiplexer Applications	PDF \| HTML	13/05/2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TMUX-24PW-EVM — Módulo de evaluación genérico TMUX para encapsulados PW de 16, 20 y 24 pines (TSSOP)

El módulo de evaluación TMUX-24PW-EVM permite la rápida creación de prototipos y la caracterización de CC de la línea de productos TMUX de TI que utilizan encapsulados TSSOP (PW) de 16, 20 o 24 pines y está preparado para funcionar a alta tensión.

Guía del usuario: PDF | HTML

Productos y hardware compatibles

En inventario

Límite:

Inicie sesión para hacer un pedido

lock

Iniciar sesión para ver el inventario

??asset.out-of-stock-ti_es_MX??

No disponible

Adaptador de interfaz

LEADED-ADAPTER1 — Adaptador de montaje superficial a cabezal DIP para pruebas rápidas de los encapsulados con plomo de

La placa EVM-LEADED1 permite realizar pruebas rápidas y prototipado de los encapsulados con plomo habituales de TI. La placa tiene huellas para convertir los encapsulados de montaje en superficie D, DBQ, DCT, DCU, DDF, DGS, DGV y PW de TI a cabezales DIP con espaciamiento de 100 mil.

Guía del usuario: PDF

Productos y hardware compatibles

En inventario

Límite:

Inicie sesión para hacer un pedido

lock

Iniciar sesión para ver el inventario

??asset.out-of-stock-ti_es_MX??

No disponible

Modelo de simulación