Inicio Audio, háptica y piezoeléctrica Amplificadores de audio Amplificadores de audio de uso general
Inicio
Audio, háptica y piezoeléctrica
Amplificadores de audio
Amplificadores de audio de uso general

TPA2013D1

ACTIVO

Amplificador de audio mono de Clase D, entrada analógica y 2.7 W con convertidor de refuerzo integra

Haga su pedido ahora
Hoja de datos

TPA2013D1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Audio input type Analog Input Architecture Class-D Boosted Speaker channels (max) Mono Control interface GPIO Output power (W) 2.7 Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 1.8 THD + N at 1 kHz (%) 1 Load (min) (Ω) 4 Analog supply voltage (min) (V) 2.3 Analog supply voltage (max) (V) 5.2 Rating Catalog Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Boosted Speaker channels (max) Mono Control interface GPIO Output power (W) 2.7 Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 1.8 THD + N at 1 kHz (%) 1 Load (min) (Ω) 4 Analog supply voltage (min) (V) 2.3 Analog supply voltage (max) (V) 5.2 Rating Catalog Operating temperature range (°C) -40 to 85
VQFN (RGP) 20 16 mm² (4 mm × 4 mm) DSBGA (YZH) 16 5.0625 mm² (— mm × — mm)
  • High Efficiency Integrated Boost Converter (Over
    90% Efficiency)
  • 2.2-W into an 8-Ω Load from a 3.6-V Supply
  • 2.7-W into an 4-Ω Load from a 3.6-V Supply
  • Operates from 1.8 V to 5.5 V
  • Efficient Class-D Prolongs Battery Life
  • Independent Shutdown for Boost Converter and
    Class-D Amplifier
  • Differential Inputs Reduce RF Common Noise
  • Built-In INPUT Low-Pass Filter Decreases RF and
    Out-of-Band Noise Sensitivity
  • Synchronized Boost and Class-D Eliminates Beat
    Frequencies
  • Thermal and Short-Circuit Protection
  • Available in 2.275-mm × 2.275-mm 16-ball WCSP
    and 4-mm × 4-mm 20-Lead QFN Packages
  • 3 Selectable Gain Settings of 2 V/V, 6 V/V, and
    10 V/V
  • High Efficiency Integrated Boost Converter (Over
    90% Efficiency)
  • 2.2-W into an 8-Ω Load from a 3.6-V Supply
  • 2.7-W into an 4-Ω Load from a 3.6-V Supply
  • Operates from 1.8 V to 5.5 V
  • Efficient Class-D Prolongs Battery Life
  • Independent Shutdown for Boost Converter and
    Class-D Amplifier
  • Differential Inputs Reduce RF Common Noise
  • Built-In INPUT Low-Pass Filter Decreases RF and
    Out-of-Band Noise Sensitivity
  • Synchronized Boost and Class-D Eliminates Beat
    Frequencies
  • Thermal and Short-Circuit Protection
  • Available in 2.275-mm × 2.275-mm 16-ball WCSP
    and 4-mm × 4-mm 20-Lead QFN Packages
  • 3 Selectable Gain Settings of 2 V/V, 6 V/V, and
    10 V/V

The TPA2013D1 device is a high efficiency Class-D audio power amplifier with an integrated boost converter. It drives up to 2.7 W (10% THD+N) into a 4-Ω speaker. With 85% typical efficiency, the TPA2013D1 helps extend battery life when playing audio.

The built-in boost converter generates the voltage rail for the Class-D amplifier. This provides a louder audio output than a stand-alone amplifier connected directly to the battery. It also maintains a consistent loudness, regardless of battery voltage. Additionally, the boost converter can be used to supply external devices.

The TPA2013D1 has an integrated low pass filter to improve RF rejection and reduce out-of-band noise, increasing the signal-to-noise ratio (SNR). A built-in PLL synchronizes the boost converter and Class-D switching frequencies, thus eliminating beat frequencies and improving audio quality. All outputs are fully protected against shorts to ground, power supply, and output-to-output shorts.

The TPA2013D1 device is a high efficiency Class-D audio power amplifier with an integrated boost converter. It drives up to 2.7 W (10% THD+N) into a 4-Ω speaker. With 85% typical efficiency, the TPA2013D1 helps extend battery life when playing audio.

The built-in boost converter generates the voltage rail for the Class-D amplifier. This provides a louder audio output than a stand-alone amplifier connected directly to the battery. It also maintains a consistent loudness, regardless of battery voltage. Additionally, the boost converter can be used to supply external devices.

The TPA2013D1 has an integrated low pass filter to improve RF rejection and reduce out-of-band noise, increasing the signal-to-noise ratio (SNR). A built-in PLL synchronizes the boost converter and Class-D switching frequencies, thus eliminating beat frequencies and improving audio quality. All outputs are fully protected against shorts to ground, power supply, and output-to-output shorts.
filter Buscar otro/a Amplificadores de audio de uso general
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 8
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TPA2013D1 2.7-W Constant Output Power Class-D Audio Amplifier With Integrated Boost Converter datasheet (Rev. A) PDF | HTML 31/03/2016
Nota sobre la aplicación Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) 26/08/2019
Nota sobre la aplicación AN-1849 An Audio Amplifier Power Supply Design (Rev. C) 27/06/2019
Nota sobre la aplicación AN-1737 Managing EMI in Class D Audio Applications (Rev. A) 1/05/2013
Nota sobre la aplicación Filter-Free Class-D Audio Amplifiers 9/11/2009
Nota sobre la aplicación TPA2013D1 Boost Converter Component Selection 19/03/2009
Nota sobre la aplicación TPA2013D1 Boost Converter Component Specification 9/12/2008
EVM User's guide TPA2013D1EVM - User Guide 20/08/2007

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPA2013D1EVM — Módulo de evaluación (EVM) TPA2013D1

The TPA2013D1 is a 2.7 W Class-D amplifier with built-in boost converter. It drives up to 2.7 W (10% THD + N) into a 4 Ω speaker from low supply voltages.

The TPA2013D1 audio power amplifier evaluation module (TPA2013D1EVM) is a complete, stand alone audio board. It contains the TPA2013D1 QFN (...)

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RGP) 20 Ultra Librarian
DSBGA (YZH) 16 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos