Inicio Audio Amplificadores de audio Amplificadores para altavoces
Inicio
Audio
Amplificadores de audio
Amplificadores para altavoces

TPA2015D1

ACTIVO

Amplificador de audio mono de Clase D, entrada analógica y 2 W con refuerzo integrado, ganancia sele

Haga su pedido ahora
Hoja de datos

TPA2015D1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Audio input type Analog Input Architecture Class-D Boosted Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.8 Power stage supply (min) (V) 2.3 Load (min) (Ω) 8 Output power (W) 2 SNR (dB) 95 THD + N at 1 kHz (%) 0.07 Iq (typ) (mA) 1.7 Control interface GPIO Closed/open loop Closed Analog supply (min) (V) 2.3 Analog supply voltage (max) (V) 5.2 PSRR (dB) 85 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Boosted Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.8 Power stage supply (min) (V) 2.3 Load (min) (Ω) 8 Output power (W) 2 SNR (dB) 95 THD + N at 1 kHz (%) 0.07 Iq (typ) (mA) 1.7 Control interface GPIO Closed/open loop Closed Analog supply (min) (V) 2.3 Analog supply voltage (max) (V) 5.2 PSRR (dB) 85 Operating temperature range (°C) -40 to 85
DSBGA (YZH) 16 5.0625 mm² 2.25 x 2.25
  • Built-In SpeakerGuardTM Automatic Gain Control (AGC) with Enhanced Battery Tracking
    • Limits Battery Current Consumption
    • Prevents Audio Clipping
  • 2 W into 8 Ω Load From 3.6 V Supply (6% THD)
  • Integrated Adaptive Boost Converter
    • Increases Efficiency at Low Output Power
  • Low Quiescent Current of 1.7 mA from 3.6 V
  • Operates From 2.5 V to 5.2 V
  • Thermal and Short-Circuit Protection with Auto Recovery
  • Three Gain Settings: 6 dB, 15.5 dB, and 20 dB
  • Independent Control for Boost and Class-D
  • Pin-to-Pin Compatible with TPA2013D1
  • Available in 1.954 mm × 1.954 mm 16-ball DSBGA Package
  • Built-In SpeakerGuardTM Automatic Gain Control (AGC) with Enhanced Battery Tracking
    • Limits Battery Current Consumption
    • Prevents Audio Clipping
  • 2 W into 8 Ω Load From 3.6 V Supply (6% THD)
  • Integrated Adaptive Boost Converter
    • Increases Efficiency at Low Output Power
  • Low Quiescent Current of 1.7 mA from 3.6 V
  • Operates From 2.5 V to 5.2 V
  • Thermal and Short-Circuit Protection with Auto Recovery
  • Three Gain Settings: 6 dB, 15.5 dB, and 20 dB
  • Independent Control for Boost and Class-D
  • Pin-to-Pin Compatible with TPA2013D1
  • Available in 1.954 mm × 1.954 mm 16-ball DSBGA Package

The TPA2015D1 is a high efficiency Class-D audio power amplifier with battery-tracking SpeakerGuard™ AGC technology and an integrated adaptive boost converter that enhances efficiency at low output power. It drives up to 2 W into an 8 Ω speaker (6% THD). With 85% typical efficiency, the TPA2015D1 helps extend battery life when playing audio.

The built-in boost converter generates a 5.5 V supply voltage for the Class-D amplifier. This provides a louder audio output than a stand-alone amplifier directly connected to the battery. The SpeakerGuardTM AGC adjusts the Class-D gain to limit battery current and prevent heavy clipping.

The TPA2015D1 has an integrated low-pass filter to improve the RF rejection and reduce DAC out-of-band noise, increasing the signal to noise ratio (SNR).

The TPA2015D1 is available in a space saving 1.954 mm × 1.954 mm, 0.5 mm pitch DSBGA package (YZH).

The TPA2015D1 is a high efficiency Class-D audio power amplifier with battery-tracking SpeakerGuard™ AGC technology and an integrated adaptive boost converter that enhances efficiency at low output power. It drives up to 2 W into an 8 Ω speaker (6% THD). With 85% typical efficiency, the TPA2015D1 helps extend battery life when playing audio.

The built-in boost converter generates a 5.5 V supply voltage for the Class-D amplifier. This provides a louder audio output than a stand-alone amplifier directly connected to the battery. The SpeakerGuardTM AGC adjusts the Class-D gain to limit battery current and prevent heavy clipping.

The TPA2015D1 has an integrated low-pass filter to improve the RF rejection and reduce DAC out-of-band noise, increasing the signal to noise ratio (SNR).

The TPA2015D1 is available in a space saving 1.954 mm × 1.954 mm, 0.5 mm pitch DSBGA package (YZH).
open-in-new Buscar otro/a Amplificadores para altavoces
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 5
Tipo Título Fecha
* Data sheet TPA2015D12-W Constant Output Power Class-D Audio Amplifier With Adaptive Boost Converter and Battery Tracking Speakerguard™ AGC datasheet (Rev. C) PDF | HTML 09 jun 2022
Application note Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) 26 ago 2019
Application note AN-1849 An Audio Amplifier Power Supply Design (Rev. C) 27 jun 2019
Application note AN-1737 Managing EMI in Class D Audio Applications (Rev. A) 01 may 2013
User guide TPA2015D1EVM - User Guide 01 may 2010

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPA2015D1YZHEVM — Módulo de evaluación TPA2015D1YZHEVM

The TPA2015D1 is a mono 2.0-W Class-D audio amplifier with an integrated boost converter. The evaluation module comprises a TPA2015D1, a small number of external components, and input and output connectors to simplify interface to an audio source and speaker. The EVM features jumpers to easily (...)

Guía del usuario: PDF
No disponible en TI.com
Modelo de simulación

TPA2015D1 PSpice Transient Model

SLOM181.ZIP (2 KB) - PSpice Model
Descargar
Modelo de simulación

TPA2015D1 TINA-TI Transient Reference Design

SLOM183.TSC (14138 KB) - TINA-TI Reference Design
Descargar
Modelo de simulación

TPA2015D1 TINA-TI Transient Spice Model

SLOM182.ZIP (75 KB) - TINA-TI Spice Model
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Paquete Pasadores Descargar
DSBGA (YZH) 16 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos