The TPD2S017 is a two channel electrostatic discharge (ESD) protection device. This protection product offers two-stage ESD transient voltage suppression (TVS) diodes in each line with a typically 1-Ω series resistor isolation. This architecture allows the device to clamp at a very low voltage during system level ESD strikes.
The TPD2S017 conforms to the IEC61000-4-2 ESD protection standard. Due to the series resistor component, the TPD2S017 provides a controlled filter roll-off for even greater spurious EMI suppression and signal integrity. The monolithic silicon technology allows good matching of the component values, including the clamp capacitances and the series resistors between the differential signal pairs. The tight matching of the line capacitance and series resistors ensures that the differential signal distortion due to added ESD clamp remains minimal, and it also allows the part to operate at high-speed differential data rate (in excess of 1.5 Gbps). The DBV package offers a flow-through pin mapping for ease of board layout.
Typical applications of this ESD protection device are circuit protection for USB data lines, IEEE 1394 Interfaces, LVDS, MDDI/MIPI and HS signals.
| Documentación principal | Tipo | Título | Opciones de formato | Descargar la versión más reciente en inglés | Fecha |
|---|---|---|---|---|---|
| * | Hoja de datos | TPD2S017 2-Channel Ultra-Low Clamp Voltage ESD Solution With Series-Resistor Isolation datasheet (Rev. C) | PDF | HTML | 3/01/2023 | |
| Nota sobre la aplicación | ESD and Surge Protection for USB Interfaces (Rev. B) | PDF | HTML | 11/01/2024 | ||
| Guía del usuario | Reading and Understanding an ESD Protection Data Sheet (Rev. A) | PDF | HTML | 19/09/2023 | ||
| Nota sobre la aplicación | ESD Packaging and Layout Guide (Rev. B) | PDF | HTML | 18/08/2022 | ||
| Nota sobre la aplicación | ESD Protection Layout Guide (Rev. A) | PDF | HTML | 7/04/2022 | ||
| Guía del usuario | Generic ESD Evaluation Module User's Guide (Rev. A) | PDF | HTML | 27/09/2021 | ||
| Informe | Designing USB for short-to-battery tolerance in automotive environments | 10/02/2016 | |||
| Analog Design Journal | Design Considerations for System-Level ESD Circuit Protection | 25/09/2012 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
This IP Camera power module is a highly efficient power solution that enables high performance 1080p operation at the Class 1 PoE power level. This innovative power module, used in the low power DM385-AR331 IP Camera, relies on highly efficient switchers like the TPS5432 that are also very cost (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI.