TPS51120

Name: TPS51120
Brand: TI
SKU: TPS51120
Price: 1.477 USD

ACTIVO

Controlador reductor síncrono de doble canal de 4.5 V a 28 V con bajo consumo de corriente en espera

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TPS51120 Dual, Synchronous Step-Down Controller With 100-mA Standby Regulators for Notebook System Power datasheet (Rev. C) (Inglés) PDF | HTML

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Funcionalidad similar a la del dispositivo comparado

TPS51397A

ACTIVO

Regulador reductor síncrono de 10 A y entrada de 4.5 V a 24 V Offers a lower IQ and is soft start adjustable with an extended positive operating temperature range in a smaller package.

TPS51120

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Vin (min) (V)

4.5

Vin (max) (V)

28

Iout (max) (A)

20

Operating temperature range (°C)

-40 to 85

Control mode

D-CAP, current mode

Rating

Catalog

Vout (min) (V)

1

Vout (max) (V)

5.5

Iq (typ) (A)

0.00075

Duty cycle (max) (%)

88

Vin (min) (V)

4.5

Vin (max) (V)

28

Iout (max) (A)

20

Operating temperature range (°C)

-40 to 85

Control mode

D-CAP, current mode

Rating

Catalog

Vout (min) (V)

1

Vout (max) (V)

5.5

Iq (typ) (A)

0.00075

Duty cycle (max) (%)

88

VQFN (RHB)

32

25 mm² 5 x 5

3.3-V and 5-V 100-mA Bootstrapped Standby
Regulators with Independent Enables
Selectable D-CAP™ Mode Enables Fast Transient
Response Less than 100 ns
Selectable Low Ripple Current Mode
Less than 1% Internal Reference Accuracy
Selectable PWM-only/Auto-skip Modes
Low-side R_DS(on) Loss-less Current Sensing
R_SENSE Accurate Current Sense Option
Internal Soft-Start and Integrated V_OUT Discharge
Transistors
Integrated 2-V Reference
Adaptive Gate Drivers with Integrated Boost Diode
Powergood for Each Channel with Delay Timer
Fault Disable Mode
Supply Input Voltage Range: 4.5 V to 28 V

3.3-V and 5-V 100-mA Bootstrapped Standby
Regulators with Independent Enables
Selectable D-CAP™ Mode Enables Fast Transient
Response Less than 100 ns
Selectable Low Ripple Current Mode
Less than 1% Internal Reference Accuracy
Selectable PWM-only/Auto-skip Modes
Low-side R_DS(on) Loss-less Current Sensing
R_SENSE Accurate Current Sense Option
Internal Soft-Start and Integrated V_OUT Discharge
Transistors
Integrated 2-V Reference
Adaptive Gate Drivers with Integrated Boost Diode
Powergood for Each Channel with Delay Timer
Fault Disable Mode
Supply Input Voltage Range: 4.5 V to 28 V

The TPS51120 is a highly sophisticated dual, synchronous step-down controller. It is a full featured controller designed to run directly off a three- or four-cell Li-ion battery and provide high-power and 5-V and/or 3.3-V standby regulation for all the downstream circuitry in a notebook computer system. High-current, 100-mA, 5-V or 3.3-V on-board linear regulators have glitch-free switch over function to SMPS and can be kept alive independently during standby state. The pseudo-constant frequency adaptive on-time control scheme supports full range of current mode operation including simplified loop compensation, ceramic output capacitors as well as seamless transition to reduced frequency operation at light-load condition. Optional D-CAP mode operation optimized for SP-CAP or POSCAP output capacitors allows further reduction of external compensation parts. Dynamic UVP supports VIN line sag without latch off by hitting 5-V UVP. No negative voltage appears at output voltage node during UVLO, UVP, and OCP, OTP or loss of VIN.

The TPS51120 32-pin QFN package is specified from –40°C to 85°C ambient temperature.

The TPS51120 is a highly sophisticated dual, synchronous step-down controller. It is a full featured controller designed to run directly off a three- or four-cell Li-ion battery and provide high-power and 5-V and/or 3.3-V standby regulation for all the downstream circuitry in a notebook computer system. High-current, 100-mA, 5-V or 3.3-V on-board linear regulators have glitch-free switch over function to SMPS and can be kept alive independently during standby state. The pseudo-constant frequency adaptive on-time control scheme supports full range of current mode operation including simplified loop compensation, ceramic output capacitors as well as seamless transition to reduced frequency operation at light-load condition. Optional D-CAP mode operation optimized for SP-CAP or POSCAP output capacitors allows further reduction of external compensation parts. Dynamic UVP supports VIN line sag without latch off by hitting 5-V UVP. No negative voltage appears at output voltage node during UVLO, UVP, and OCP, OTP or loss of VIN.

The TPS51120 32-pin QFN package is specified from –40°C to 85°C ambient temperature.

open-in-new

Buscar otro/a AC/DC & DC/DC controllers (external FET)

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

	Tipo	Título		Fecha
*	Data sheet	TPS51120 Dual, Synchronous Step-Down Controller With 100-mA Standby Regulators for Notebook System Power datasheet (Rev. C)	PDF \| HTML	29 ene 2015
	User guide	TPS51120 Buck Controller Evaluation Module User's Guide (Rev. B)	PDF \| HTML	04 mar 2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS51120EVM-001 — Módulo de evaluación TPS51120

The TPS51120EVM-001 evaluation module utilizes the TPS51120 in a high efficiency, dual synchronous buck converter providing 5 V at 6 A and 3.3 V at 6 A from 8 V to 25 V input. The user’s guide describes the TPS51120EVM-001 performance in D-CAP™ mode and RDS(on) current sensing.

The TPS51120 is a (...)

Guía del usuario: PDF | HTML