TPS51225C

ACTIVO

Controlador reductor síncrono doble de 5.5 V a 24 V con LDO VREG5 siempre activado

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat Dual Synchronous Step-Down Controller with 5-V and 3.3-V LDOs datasheet (Rev. B) (Inglés)

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Funcionalidad similar a la del dispositivo comparado

TPS51397A

ACTIVO

Regulador reductor síncrono de 10 A y entrada de 4.5 V a 24 V Faster switching frequency and extended positive operating temperature range.

TPS51225C

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Topology

Buck

Iout (max) (A)

10

Vin (max) (V)

24

Vin (min) (V)

5.5

Vout (max) (V)

5.5

Vout (min) (V)

4.5

Control mode

D-CAP

Features

Enable, Light-load efficiency, Power good, Synchronous rectification

Duty cycle (max) (%)

90

Iq (typ) (A)

0.0009

Number of phases

1

Operating temperature range (°C)

-40 to 85

Rating

Catalog

Topology

Buck

Iout (max) (A)

10

Vin (max) (V)

24

Vin (min) (V)

5.5

Vout (max) (V)

5.5

Vout (min) (V)

4.5

Control mode

D-CAP

Features

Enable, Light-load efficiency, Power good, Synchronous rectification

Duty cycle (max) (%)

90

Iq (typ) (A)

0.0009

Number of phases

1

Operating temperature range (°C)

-40 to 85

WQFN (RUK)

20

9 mm² (3 mm × 3 mm)

Input Voltage Range: 5.5 V to 24 V
Output Voltages: 5 V and 3.3 V (Adjustable Range ±10%)
Built-in, 100-mA, 5-V and 3.3-V LDOs
Clock Output for Charge-Pump
±1% Reference Accuracy
Adaptive On-time D-CAP Mode Control Architecture with 300kHz/355kHz Frequency Setting
Auto-skip Light Load Operation (TPS51225/C)
OOA Light Load Operation (TPS51225B)
Internal 0.8-ms Voltage Servo Soft-Start
Low-Side R_DS(on)Current Sensing Scheme with 4500 ppm/°C Temperature Coefficient
Built-in Output Discharge Function
Separate Enable Input for Switchers (TPS51225/B/C)
Dedicated OC Setting Terminals
Power Good Indicator
OVP/UVP/OCP Protection
Non-latch UVLO/OTP Protection
20-Pin, 3 mm × 3 mm, QFN (RUK)

Input Voltage Range: 5.5 V to 24 V
Output Voltages: 5 V and 3.3 V (Adjustable Range ±10%)
Built-in, 100-mA, 5-V and 3.3-V LDOs
Clock Output for Charge-Pump
±1% Reference Accuracy
Adaptive On-time D-CAP Mode Control Architecture with 300kHz/355kHz Frequency Setting
Auto-skip Light Load Operation (TPS51225/C)
OOA Light Load Operation (TPS51225B)
Internal 0.8-ms Voltage Servo Soft-Start
Low-Side R_DS(on)Current Sensing Scheme with 4500 ppm/°C Temperature Coefficient
Built-in Output Discharge Function
Separate Enable Input for Switchers (TPS51225/B/C)
Dedicated OC Setting Terminals
Power Good Indicator
OVP/UVP/OCP Protection
Non-latch UVLO/OTP Protection
20-Pin, 3 mm × 3 mm, QFN (RUK)

The TPS51225/B/C is a cost-effective, dual-synchronous buck controller targeted for notebook system-power supply solutions. It provides 5-V and 3.3-V LDOs and requires few external components. The 260-kHz VCLK output can be used to drive an external charge pump, generating gate drive voltage for the load switches without reducing the main converter efficiency. The TPS51225/B/C supports high efficiency, fast transient response and provides a combined power-good signal. Adaptive on-time, D-CAP™ control provides convenient and efficient operation. The device operates with supply input voltage ranging from 5.5 V to 24 V and supports output voltages of 5.0 V and 3.3 V. The TPS51225/B/C is available in a 20-pin, 3 mm × 3 mm, QFN package and is specified from –40°C to 85°C.

filter

Buscar otro/a Controladores de CC/CC

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

Documentación principal	Tipo	Título	Opciones de formato	Descargar la versión más reciente en inglés	Fecha
*	Hoja de datos	Dual Synchronous Step-Down Controller with 5-V and 3.3-V LDOs datasheet (Rev. B)			9/09/2012
	Nota sobre la aplicación	Mosfet Driver Circuit Design Guide for TPS512xx (Rev. A)			1/04/2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación