Inicio Administración de potencia Controladores LED Controladores para LED de retroiluminación

TPS61195

ACTIVO

Controlador de LED blanco de 96 LED y 8 canales para retroiluminación LCD con interfaz SMBus

Detalles del producto

Number of channels 8 Vin (min) (V) 4.5 Vin (max) (V) 21 Vout (min) (V) 15 Vout (max) (V) 45 Type Inductive Switching frequency (max) (kHz) 1000 Duty cycle (max) (%) 94 LED current per channel (mA) 30 Peak efficiency (%) 94 Topology Boost Features Load Disconnect During Shutdown Operating temperature range (°C) -40 to 85 Rating Catalog
Number of channels 8 Vin (min) (V) 4.5 Vin (max) (V) 21 Vout (min) (V) 15 Vout (max) (V) 45 Type Inductive Switching frequency (max) (kHz) 1000 Duty cycle (max) (%) 94 LED current per channel (mA) 30 Peak efficiency (%) 94 Topology Boost Features Load Disconnect During Shutdown Operating temperature range (°C) -40 to 85 Rating Catalog
WQFN (RUY) 28 16 mm² (4 mm × 4 mm)
  • 4.5V to 21V Input Voltage
  • Integrated 2.5A 50V MOSFET
  • 600kHz to 1MHz Programmable Switching Frequency
  • Adaptive Boost Output for Best Efficiency
  • Designed to Use Small L-C Components
  • Internal Loop Compensation
  • Eight Current Sinks of 30mA
  • Support up to Total 96 LEDs
  • 1% Current Matching
  • PWM and SMBus Brightness Interface
  • 8-bits (256 steps) Brightness Level
  • Programmable Over Voltage Threshold
  • Built-in WLED Open/Short Protection
  • Over Thermal Protection
  • 28L 4×4 WQFN
  • APPLICATIONS
    • Notebook/Netbook LCD Display Backlighting

  • 4.5V to 21V Input Voltage
  • Integrated 2.5A 50V MOSFET
  • 600kHz to 1MHz Programmable Switching Frequency
  • Adaptive Boost Output for Best Efficiency
  • Designed to Use Small L-C Components
  • Internal Loop Compensation
  • Eight Current Sinks of 30mA
  • Support up to Total 96 LEDs
  • 1% Current Matching
  • PWM and SMBus Brightness Interface
  • 8-bits (256 steps) Brightness Level
  • Programmable Over Voltage Threshold
  • Built-in WLED Open/Short Protection
  • Over Thermal Protection
  • 28L 4×4 WQFN
  • APPLICATIONS
    • Notebook/Netbook LCD Display Backlighting

The TPS61195 IC provides highly integrated solutions for large-size LCD backlighting. This device has a built-in high efficiency boost regulator with integrated 2.5A/50V power MOSFET. The eight current sink regulators provide high precision current regulation and matching. In total, the device can support up to 96 LEDs. Unused sinks are disabled by tying them to ground. The boost output automatically adjusts its voltage to the WLED forward voltage to improve efficiency.

The TPS61195 supports multiple brightness dimming methods. During PWM dimming, each IFB pin’s current is turned on/off at the duty cycle and frequency determined by an integrated pulse width modulation (PWM). The frequency of this signal is resistor programmable, while the duty cycle is controlled directly either from an external PWM signal input to the DPWM pin or through the SMBUS interface. Additionally, the SMBUS interface provides some operational reporting data such as if one or more strings have failed or if the IC is over-heating. In direct PWM dimming mode, each IFB current is turned on/off at same duty cycle and frequency as the PWM signal input on the DPWM pin. In analog dimming mode, the input PWM duty cycle information is translated to analog signal to control the WLED current signal linearly over 1% to 100% brightness area.

The TPS61195 integrates over-current and short-circuit protection, soft start and over temperature protection circuit. The device also provides programmable output over-voltage protection, and the threshold is adjusted by external resistor divider combination.

The TPS61195 IC has built-in linear regulator for the IC supply. The device is in a 4×4 mm QFN package.

The TPS61195 IC provides highly integrated solutions for large-size LCD backlighting. This device has a built-in high efficiency boost regulator with integrated 2.5A/50V power MOSFET. The eight current sink regulators provide high precision current regulation and matching. In total, the device can support up to 96 LEDs. Unused sinks are disabled by tying them to ground. The boost output automatically adjusts its voltage to the WLED forward voltage to improve efficiency.

The TPS61195 supports multiple brightness dimming methods. During PWM dimming, each IFB pin’s current is turned on/off at the duty cycle and frequency determined by an integrated pulse width modulation (PWM). The frequency of this signal is resistor programmable, while the duty cycle is controlled directly either from an external PWM signal input to the DPWM pin or through the SMBUS interface. Additionally, the SMBUS interface provides some operational reporting data such as if one or more strings have failed or if the IC is over-heating. In direct PWM dimming mode, each IFB current is turned on/off at same duty cycle and frequency as the PWM signal input on the DPWM pin. In analog dimming mode, the input PWM duty cycle information is translated to analog signal to control the WLED current signal linearly over 1% to 100% brightness area.

The TPS61195 integrates over-current and short-circuit protection, soft start and over temperature protection circuit. The device also provides programmable output over-voltage protection, and the threshold is adjusted by external resistor divider combination.

The TPS61195 IC has built-in linear regulator for the IC supply. The device is in a 4×4 mm QFN package.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 6
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos WLED Driver for LCD Backlighting With PWM and SMBus Control Interface datasheet (Rev. A) 20/08/2010
Informe Common LED Functions and LED Driver Design Considerations 21/09/2020
Nota sobre la aplicación Some Guidelines and Tips for the LED Driver Application 14/08/2019
Nota sobre la aplicación Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 11/12/2018
Guía de selección Power Management Guide 2018 (Rev. R) 25/06/2018
Guía del usuario TPS61195EVM-460 Useer's Guide 14/05/2010

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

GUI para el módulo de evaluación (EVM)

TPS61195EVM-SW — TPS61195EVM-SW Software Download

The TPS61195EVM software allows you to control the TPS61195EVM via the SMBus interface. This interface allows the user to:

  • Enable/disable the IC and switch between dimming modes,
  • Control the LED current through the ICs current sink, thereby dimming the attached LEDs and
  • Monitor fault conditions.

(...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN (RUY) 28 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos