Inicio Administración de potencia Reguladores conmutados CC/CC Convertidores de CC/CC
Inicio
Administración de potencia
Reguladores conmutados CC/CC
Convertidores de CC/CC

TPS62180

ACTIVO

Convertidor reductor síncrono de 4 V a 15 V y 6 A con buena potencia, precisión del 1 % e inicio sua

Haga su pedido ahora
Hoja de datos

TPS62180

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Topology Buck Iout (max) (A) 6 Vin (max) (V) 15 Vin (min) (V) 4 Vout (max) (V) 6 Vout (min) (V) 0.9 Features Enable, Light Load Efficiency, Phase Interleaving, Power good, Synchronous Rectification Control mode current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00003 Duty cycle (max) (%) 100
Rating Catalog Topology Buck Iout (max) (A) 6 Vin (max) (V) 15 Vin (min) (V) 4 Vout (max) (V) 6 Vout (min) (V) 0.9 Features Enable, Light Load Efficiency, Phase Interleaving, Power good, Synchronous Rectification Control mode current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00003 Duty cycle (max) (%) 100
DSBGA (YZF) 24 7.3125 mm² (— mm × — mm)
  • Dual Phase Balanced Peak Current Mode
  • Input Voltage Range: 4 V to 15 V
  • Output Voltage Range: 0.9 V to 6 V
  • Output Current up to 6 A
  • Typical Quiescent Current of 28 µA
  • Output Voltage Accuracy of ±1% (PWM Mode)
  • Automatic Efficiency Enhancement (AEE™)
  • Phase Shifted Operation
  • Automatic Power Save Mode
  • Adjustable Soft Start
  • Power Good Output
  • Undervoltage Lockout
  • HICCUP Over Current Protection
  • Pin-to-Pin Compatible with TPS62184
  • Over Temperature Protection
  • NanoFree™ 2.10 mm x 3.10 mm DSBGA Package
  • Create a Custom Design Using the TPS62180 With the WEBENCH® Power Designer
  • Dual Phase Balanced Peak Current Mode
  • Input Voltage Range: 4 V to 15 V
  • Output Voltage Range: 0.9 V to 6 V
  • Output Current up to 6 A
  • Typical Quiescent Current of 28 µA
  • Output Voltage Accuracy of ±1% (PWM Mode)
  • Automatic Efficiency Enhancement (AEE™)
  • Phase Shifted Operation
  • Automatic Power Save Mode
  • Adjustable Soft Start
  • Power Good Output
  • Undervoltage Lockout
  • HICCUP Over Current Protection
  • Pin-to-Pin Compatible with TPS62184
  • Over Temperature Protection
  • NanoFree™ 2.10 mm x 3.10 mm DSBGA Package
  • Create a Custom Design Using the TPS62180 With the WEBENCH® Power Designer

The TPS6218x is a synchronous dual-phase step-down DC-DC converter for low profile power rails. It operates with two identical, current balanced phases that are peak current controlled enabling use in height limited applications.

With a wide operating input voltage range of 4 V to 15 V, the device is ideally suited for systems powered from multi-cell Li-Ion batteries or 12-V rails. The output current of 6 A is continuously provided by two phases of 3 A each, allowing the use of low profile external components. The phases operate out of phase, reducing switching noise significantly.

The TPS6218x automatically enters Power Save Mode to maintain high efficiency down to very light loads. It also incorporates an Automatic Efficiency Enhancement (AEE™) for the entire duty cycle range.

The device features a Power Good signal, as well as an adjustable soft start. The quiescent current is typically 28 µA, it is able to run in 100% mode, and it has no duty cycle limitation even at lowest output voltage.

The TPS6218x, available in adjustable and fixed output voltage options, is packaged in a small 24-bump, 0.5 mm pitch DSBGA package.

The TPS6218x is a synchronous dual-phase step-down DC-DC converter for low profile power rails. It operates with two identical, current balanced phases that are peak current controlled enabling use in height limited applications.

With a wide operating input voltage range of 4 V to 15 V, the device is ideally suited for systems powered from multi-cell Li-Ion batteries or 12-V rails. The output current of 6 A is continuously provided by two phases of 3 A each, allowing the use of low profile external components. The phases operate out of phase, reducing switching noise significantly.

The TPS6218x automatically enters Power Save Mode to maintain high efficiency down to very light loads. It also incorporates an Automatic Efficiency Enhancement (AEE™) for the entire duty cycle range.

The device features a Power Good signal, as well as an adjustable soft start. The quiescent current is typically 28 µA, it is able to run in 100% mode, and it has no duty cycle limitation even at lowest output voltage.

The TPS6218x, available in adjustable and fixed output voltage options, is packaged in a small 24-bump, 0.5 mm pitch DSBGA package.
filter Buscar otro/a Convertidores de CC/CC
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TPS62184 ACTIVO Convertidor reductor síncrono de 4 V a 17 V y 6 A con buena potencia, precisión del 1 % e inicio sua Offers wider VIN.
Funcionalidad similar a la del dispositivo comparado
TPS62130 ACTIVO Convertidor reductor de 3 a 17 V y 3 A con control DCS en encapsulado QFN de 3 x 3 Lower current equivalent part.
TPS62135 ACTIVO Convertidor reductor de 3 V a 17 V y 4.0 A con precisión del 1 % y PFM/PWM forzado en QFN de 2 × 3 Lower current equivalent and higher efficiency.

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 16
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TPS6218x 4-V to 15-V, 6-A, 2-Phase Step-Down Converters with AEE datasheet (Rev. B) PDF | HTML 8/05/2017
Nota sobre la aplicación Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) PDF | HTML 23/05/2022
Guía de selección Buck Converter Quick Reference Guide (Rev. B) 8/04/2021
Analog Design Journal Methods of output-voltage adjustment for DC/DC converters 14/06/2019
Nota sobre la aplicación Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 11/12/2018
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 22/06/2018
Analog Design Journal Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 24/10/2017
Nota sobre la aplicación Sequencing and Tracking With the TPS621-Family and TPS821-Family (Rev. A) 28/06/2017
Analog Design Journal Testing tips for applying external power to supply outputs without an input voltage 24/10/2016
Artículo técnico Power Tips: Multiphase supplies can save space PDF | HTML 2/02/2016
Nota sobre la aplicación Basic Calculation of a Buck Converter's Power Stage (Rev. B) PDF | HTML 17/08/2015
Analog Design Journal Five steps to a great PCB layout for a step-down converter 29/01/2015
Analog Design Journal Design considerations for a resistive feedback divider in a DC/DC converter 26/04/2012
Nota sobre la aplicación Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 13/01/2012
Nota sobre la aplicación Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 19/09/2011
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 17/06/2011

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS62180EVM-581 — Convertidor reductor bifásico con entrada de 15 V y salida de 6 A con mejora automática de la eficie

The TPS62180EVM-581 (PWR581-001) facilitates the evaluation of the TPS62180 6-A, 2-phase buck converter.  The EVM outputs a 3.3-V output voltage from input voltages between 4V and 15V.  The TPS62180 features Automatic Efficiency Enhancement (AEETM) to deliver efficiencies in excess of 90% across (...)

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

TPS62180 PSpice Transient Model (Rev. C)

SLVMAF4C.ZIP (135 KB) - Modelo PSpice
Productos y hardware compatibles
Herramienta de cálculo

SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC

Calculator tool to adjust the power supply's output voltage with an analog input voltage
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YZF) 24 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos