Inicio Administración de potencia Reguladores conmutados CC/CC Convertidores de CC/CC

TPS62293

ACTIVO

Convertidor reductor de 2.25 MHz y 1 A en encapsulado SON de 2 mm × 2 mm

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS628511 ACTIVO Convertidor reductor de frecuencia fija de 2.7 V a 6 V y 1 A en encapsulado SOT583 Smaller SOT583 package, pin-to-pin compatible family 0.5 A, 1 A, 2 A

Detalles del producto

Rating Catalog Topology Buck Iout (max) (A) 1 Vin (max) (V) 6 Vin (min) (V) 2.3 Vout (max) (V) 1.8 Vout (min) (V) 1.8 Features Enable, Forced PWM, Light load efficiency, Synchronous Rectification Control mode Voltage mode Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.000015 Duty cycle (max) (%) 100
Rating Catalog Topology Buck Iout (max) (A) 1 Vin (max) (V) 6 Vin (min) (V) 2.3 Vout (max) (V) 1.8 Vout (min) (V) 1.8 Features Enable, Forced PWM, Light load efficiency, Synchronous Rectification Control mode Voltage mode Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.000015 Duty cycle (max) (%) 100
WSON (DRV) 6 4 mm² (2 mm × 2 mm)
  • High Efficiency - up to 96%
  • Output Current up to 1000 mA
  • VIN Range From 2.3 V to 6.0V for Li-ion Batteries with Extended Voltage Range
  • 2.25-MHz Fixed Frequency Operation
  • Power Save Mode at Light Load Currents
  • Output Voltage Accuracy in PWM Mode ±1.5%
  • Fixed Output Voltage Options
  • Typical 15-µA Quiescent Current
  • 100% Duty Cycle for Lowest Dropout
  • Voltage Positioning at Light Loads
  • Available in a 2-mm × 2-mm × 0.8-mm WSON (6) Package (DRV)
  • High Efficiency - up to 96%
  • Output Current up to 1000 mA
  • VIN Range From 2.3 V to 6.0V for Li-ion Batteries with Extended Voltage Range
  • 2.25-MHz Fixed Frequency Operation
  • Power Save Mode at Light Load Currents
  • Output Voltage Accuracy in PWM Mode ±1.5%
  • Fixed Output Voltage Options
  • Typical 15-µA Quiescent Current
  • 100% Duty Cycle for Lowest Dropout
  • Voltage Positioning at Light Loads
  • Available in a 2-mm × 2-mm × 0.8-mm WSON (6) Package (DRV)

The TPS6229x devices are highly efficient synchronous step down DC/DC converters optimized for battery powered portable applications. They provide up to 1000-mA output current from a single Li-ion cell.

With an input voltage range of 2.3 V to 6.0 V, the devices support batteries with extended voltage range and are ideal to power portable applications like mobile phones and other portable equipment.

The TPS6229x devices operate at 2.25-MHz fixed switching frequency and enter power save mode operation at light load currents to maintain high efficiency over the entire load current range.

The power save mode is optimized for low output voltage ripple. For low noise applications, the devices can be forced into fixed frequency pulse width modulation (PWM) mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6229x devices allow the use of small inductors and capacitors to achieve a small solution size.

The TPS6229x devices operate over a free air temperature range of –40°C to 85°C. The devices are available in a 2-mm × 2-mm 6-pin WSON package (DRV).

The TPS6229x devices are highly efficient synchronous step down DC/DC converters optimized for battery powered portable applications. They provide up to 1000-mA output current from a single Li-ion cell.

With an input voltage range of 2.3 V to 6.0 V, the devices support batteries with extended voltage range and are ideal to power portable applications like mobile phones and other portable equipment.

The TPS6229x devices operate at 2.25-MHz fixed switching frequency and enter power save mode operation at light load currents to maintain high efficiency over the entire load current range.

The power save mode is optimized for low output voltage ripple. For low noise applications, the devices can be forced into fixed frequency pulse width modulation (PWM) mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6229x devices allow the use of small inductors and capacitors to achieve a small solution size.

The TPS6229x devices operate over a free air temperature range of –40°C to 85°C. The devices are available in a 2-mm × 2-mm 6-pin WSON package (DRV).

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 12
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TPS6229x 1-A Step Down Converter in 2 x 2 DRV Package datasheet (Rev. G) PDF | HTML 11/04/2018
Nota sobre la aplicación QFN and SON PCB Attachment (Rev. C) PDF | HTML 6/12/2023
Nota sobre la aplicación Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 11/12/2018
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 22/06/2018
Nota sobre la aplicación Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. B) 29/11/2017
Analog Design Journal Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 24/10/2017
Nota sobre la aplicación Extending the Soft Start Time Without a Soft Start Pin (Rev. B) 15/06/2017
Analog Design Journal Testing tips for applying external power to supply outputs without an input voltage 24/10/2016
Nota sobre la aplicación Basic Calculation of a Buck Converter's Power Stage (Rev. B) PDF | HTML 17/08/2015
Analog Design Journal Five steps to a great PCB layout for a step-down converter 29/01/2015
Nota sobre la aplicación Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 13/01/2012
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 17/06/2011

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación

TPS62293 TINA-TI Transient Reference Design

SLVM245.TSC (829 KB) - Diseño de referencia TINA-TI
Productos y hardware compatibles
Modelo de simulación

TPS62293 TINA-TI Transient Spice Model

SLVM246.ZIP (36 KB) - Modelo TINA-TI Spice
Productos y hardware compatibles
Modelo de simulación

TPS62293 Unencrypted PSpice Transient Model Package (Rev. A)

SLIM056A.ZIP (37 KB) - Modelo PSpice
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WSON (DRV) 6 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos