TPS62562

ACTIVO

Convertidor reductor de 2.25 MHz y 600 mA en encapsulado SON de 2 mm × 2 mm

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TPS6256x 2.25-MHz, 600-mA Step-Down Converter in TSOT and 2 × 2 × 0.8-mm QFN Package datasheet (Rev. D) (Inglés) PDF | HTML

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

TPS628511

ACTIVO

Convertidor reductor de frecuencia fija de 2.7 V a 6 V y 1 A en encapsulado SOT583 Smaller SOT583 package, pin-to-pin compatible family 0.5 A, 1 A, 2 A

TPS62562

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Topology

Buck

Iout (max) (A)

0.6

Vin (max) (V)

5.5

Vin (min) (V)

2.5

Vout (max) (V)

1.8

Vout (min) (V)

1.8

Features

Enable, Forced PWM, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.000015

Duty cycle (max) (%)

100

Rating

Catalog

Topology

Buck

Iout (max) (A)

0.6

Vin (max) (V)

5.5

Vin (min) (V)

2.5

Vout (max) (V)

1.8

Vout (min) (V)

1.8

Features

Enable, Forced PWM, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.000015

Duty cycle (max) (%)

100

WSON (DRV)

6

4 mm² (2 mm × 2 mm)

Output Current up to 600 mA
Input Voltage Range from 2.5 V to 5.5 V
Output Voltage Accuracy in PWM Mode ±2.5%
Typical 15-µA Quiescent Current
100% Duty Cycle for Lowest Dropout
Soft Start
Available in a Small SOT, and 2 mm × 2 mm × 0.8 mm SON Package
For Improved Features Set, See the TPS62290 device (SLVS764)

Output Current up to 600 mA
Input Voltage Range from 2.5 V to 5.5 V
Output Voltage Accuracy in PWM Mode ±2.5%
Typical 15-µA Quiescent Current
100% Duty Cycle for Lowest Dropout
Soft Start
Available in a Small SOT, and 2 mm × 2 mm × 0.8 mm SON Package
For Improved Features Set, See the TPS62290 device (SLVS764)

The TPS62560 device is a high efficiency synchronous step down converter, optimized for battery powered portable applications. It provides up to 600-mA output current from batteries, such as single Li-Ion or other common chemistry AA and AAA cells.

With an input voltage range of 2.5 V to 5.5 V, the device is targeted to power a large variety of portable handheld equipment or POL applications.

The TPS62560 family operates at 2.25-MHz fixed switching frequency and enters a Power Save Mode operation at light load currents to maintain a high efficiency over the entire load current range.

The Power Save Mode is optimized for low output voltage ripple. For low noise applications, the device can be forced into fixed frequency PWM mode by pulling the MODE pin high. In the shutdown mode the current consumption is reduced to less than 1 µA. The TPS62560 allows the use of small inductors and capacitors to achieve a small solution size.

TPS62560 and TPS62562 are available in a 2-mm × 2-mm, 6-pin SON package, whereas the TPS62561 is available in a 5-pin SOT package.

The TPS62560 device is a high efficiency synchronous step down converter, optimized for battery powered portable applications. It provides up to 600-mA output current from batteries, such as single Li-Ion or other common chemistry AA and AAA cells.

With an input voltage range of 2.5 V to 5.5 V, the device is targeted to power a large variety of portable handheld equipment or POL applications.

The TPS62560 family operates at 2.25-MHz fixed switching frequency and enters a Power Save Mode operation at light load currents to maintain a high efficiency over the entire load current range.

The Power Save Mode is optimized for low output voltage ripple. For low noise applications, the device can be forced into fixed frequency PWM mode by pulling the MODE pin high. In the shutdown mode the current consumption is reduced to less than 1 µA. The TPS62560 allows the use of small inductors and capacitors to achieve a small solution size.

TPS62560 and TPS62562 are available in a 2-mm × 2-mm, 6-pin SON package, whereas the TPS62561 is available in a 5-pin SOT package.

filter

Buscar otro/a Convertidores de CC/CC

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 12

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	TPS6256x 2.25-MHz, 600-mA Step-Down Converter in TSOT and 2 × 2 × 0.8-mm QFN Package datasheet (Rev. D)	PDF \| HTML	18/01/2013
	Nota sobre la aplicación	QFN and SON PCB Attachment (Rev. C)	PDF \| HTML	6/12/2023
	Nota sobre la aplicación	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)		11/12/2018
	Analog Design Journal	Understanding 100% mode in low-power DC/DC converters		22/06/2018
	Analog Design Journal	Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold		24/10/2017
	Nota sobre la aplicación	Extending the Soft Start Time Without a Soft Start Pin (Rev. B)		15/06/2017
	Analog Design Journal	Testing tips for applying external power to supply outputs without an input voltage		24/10/2016
	Nota sobre la aplicación	Basic Calculation of a Buck Converter's Power Stage (Rev. B)	PDF \| HTML	17/08/2015
	Analog Design Journal	Five steps to a great PCB layout for a step-down converter		29/01/2015
	Analog Design Journal	Design considerations for a resistive feedback divider in a DC/DC converter		26/04/2012
	Nota sobre la aplicación	Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)		13/01/2012
	Analog Design Journal	IQ: What it is, what it isn’t, and how to use it		17/06/2011

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación