Inicio Gestión de la energía Controladores LED Controladores para LED de retroiluminación
Inicio
Gestión de la energía
Controladores LED
Controladores para LED de retroiluminación

TPS92391

ACTIVO

Controlador LED de alto rendimiento de atenuación Boost/SEPIC con seis canales de 200 mA

Haga su pedido ahora
Hoja de datos

TPS92391

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 6 Vin (min) (V) 3 Vin (max) (V) 48 Vout (min) (V) 1 Switching frequency (max) (kHz) 2200 LED current per channel (mA) 200 Topology Boost, Current Sink Features Adjustable Switch Frequency, Analog Dimming, Analog/PWM mixed dimming, Enable/Shutdown, Fault Detection, I2C control, OVP, PWM control, Programmable output current, Soft Start, Thermal shutdown Operating temperature range (°C) -40 to 125 Rating Catalog
Number of channels 6 Vin (min) (V) 3 Vin (max) (V) 48 Vout (min) (V) 1 Switching frequency (max) (kHz) 2200 LED current per channel (mA) 200 Topology Boost, Current Sink Features Adjustable Switch Frequency, Analog Dimming, Analog/PWM mixed dimming, Enable/Shutdown, Fault Detection, I2C control, OVP, PWM control, Programmable output current, Soft Start, Thermal shutdown Operating temperature range (°C) -40 to 125 Rating Catalog
VQFN (RHB) 32 25 mm² 5 x 5
  • Input voltage operating range 3 V to 48 V
  • Six high-precision current sinks
    • Up to 200-mA DC current for each current sink
    • Current matching 1% (typical)
    • Dimming ratio 32 000:1 using 152-Hz LED output PWM frequency
    • Up to 16-bit LED dimming resolution with I2C, or PWM input
    • 8 Configurable LED strings configuration
  • Auto-phase shift PWM dimming
  • 12-bit Analog dimming
  • Switching frequency 100 kHz to 2.2 MHz
  • Boost spread spectrum for reduced EMI
  • Boost sync input to set boost switching frequency from an external clock
  • Up to 48-V VOUT boost or SEPIC DC/DC controller
    • Switching frequency 100 kHz to 2.2 MHz
    • Boost spread spectrum for reduced EMI
    • Boost sync input to set boost switching frequency from an external clock
  • Extensive fault diagnostics
  • Input voltage operating range 3 V to 48 V
  • Six high-precision current sinks
    • Up to 200-mA DC current for each current sink
    • Current matching 1% (typical)
    • Dimming ratio 32 000:1 using 152-Hz LED output PWM frequency
    • Up to 16-bit LED dimming resolution with I2C, or PWM input
    • 8 Configurable LED strings configuration
  • Auto-phase shift PWM dimming
  • 12-bit Analog dimming
  • Switching frequency 100 kHz to 2.2 MHz
  • Boost spread spectrum for reduced EMI
  • Boost sync input to set boost switching frequency from an external clock
  • Up to 48-V VOUT boost or SEPIC DC/DC controller
    • Switching frequency 100 kHz to 2.2 MHz
    • Boost spread spectrum for reduced EMI
    • Boost sync input to set boost switching frequency from an external clock
  • Extensive fault diagnostics

The TPS92391 is an automotive high-efficiency LED driver with boost controller. The Six high-precision current sinks support phase shifting that is automatically adjusted based on the number of channels in use. LED brightness can be controlled globally through the I²C interface or PWM input.

The boost controller has adaptive output voltage control based on the headroom voltages of the LED current sinks. This feature minimizes the power consumption by adjusting the boost voltage to the lowest sufficient level in all conditions. A wide-range adjustable frequency allows the TPS92391 to avoid disturbance for AM radio band.

The TPS92391 supports built-in hybrid PWM dimming and analog current dimming, which reduces EMI, extends the LED lifetime, and increases the total optical efficiency.

The TPS92391 is an automotive high-efficiency LED driver with boost controller. The Six high-precision current sinks support phase shifting that is automatically adjusted based on the number of channels in use. LED brightness can be controlled globally through the I²C interface or PWM input.

The boost controller has adaptive output voltage control based on the headroom voltages of the LED current sinks. This feature minimizes the power consumption by adjusting the boost voltage to the lowest sufficient level in all conditions. A wide-range adjustable frequency allows the TPS92391 to avoid disturbance for AM radio band.

The TPS92391 supports built-in hybrid PWM dimming and analog current dimming, which reduces EMI, extends the LED lifetime, and increases the total optical efficiency.
open-in-new Buscar otro/a Controladores para LED de retroiluminación
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS92390 ACTIVO Controlador LED de alto rendimiento de atenuación Boost/SEPIC con cuatro canales de 200 mA TPS92391 and TPS92390 are hardware compatible

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet TPS92391 Boost/SEPIC High Dimming Performance LED Driver with Six 200-mA Channels datasheet PDF | HTML 11 mar 2021

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LP8866EVM — Módulo de evaluación del controlador LED LP8866-Q1 para pantallas de automóviles de 6 canales

The LP8866EVM helps designers to evaluate the characteristics, operation, and performance of the LP8866(S)-Q1 device, a 6-channel high-efficiency LED driver for automotive display LED backlighting. The LP8866(S)-Q1 device integrates a boost or SEPIC controller and six high-precision current sinks. (...)

Guía del usuario: PDF
Ver opciones
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Paquete Pasadores Descargar
VQFN (RHB) 32 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos