TS3USB31

ACTIVO

Interruptor de 1 puerto USB 2.0 de alta velocidad (480 Mbps) con activación única

Detalles del producto

Protocols USB 2.0 Configuration 1:1 SPST Number of channels 2 USB speed (Mbps) 480 Bandwidth (MHz) 1220 Supply voltage (max) (V) 4.3 Supply voltage (min) (V) 3 Ron (typ) (mΩ) 6000 Input/output voltage (min) (V) 0 Input/output voltage (max) (V) 4.3 ESD HBM (typ) (kV) 6 Operating temperature range (°C) -40 to 85 COFF (typ) (pF) 2 CON (typ) (pF) 6 Off isolation (typ) (dB) -30 OFF-state leakage current (max) (µA) 1 Ron (max) (mΩ) 10000 Ron channel match (max) (Ω) 0.35 Turnoff time (disable) (max) (ns) 25 Turnon time (enable) (max) (ns) 30 Rating Catalog
Protocols USB 2.0 Configuration 1:1 SPST Number of channels 2 USB speed (Mbps) 480 Bandwidth (MHz) 1220 Supply voltage (max) (V) 4.3 Supply voltage (min) (V) 3 Ron (typ) (mΩ) 6000 Input/output voltage (min) (V) 0 Input/output voltage (max) (V) 4.3 ESD HBM (typ) (kV) 6 Operating temperature range (°C) -40 to 85 COFF (typ) (pF) 2 CON (typ) (pF) 6 Off isolation (typ) (dB) -30 OFF-state leakage current (max) (µA) 1 Ron (max) (mΩ) 10000 Ron channel match (max) (Ω) 0.35 Turnoff time (disable) (max) (ns) 25 Turnon time (enable) (max) (ns) 30 Rating Catalog
UQFN (RSE) 8 2.25 mm² 1.5 x 1.5
  • VCC Operation at 3 V and 4.3 V
  • 1.8-V Compatible Control-Pin Inputs
  • IOFF Supports Partial Power-Down Mode Operation
  • ron = 10 Ω Maximum
  • Δron <0.35 Ω Typical
  • Cio(ON) = 6 pF Typical
  • Low Power Consumption (1 µA Maximum)
  • ESD Performance Tested Per JESD 22
    • 6000-V Human-Body Model
      (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)
    • 250-V Machine Model (A115-A)
  • Wide –3-dB Bandwidth = 1220 MHz Typical
  • Packaged in 8-Pin TQFN (1.5 mm × 1.5 mm)
  • VCC Operation at 3 V and 4.3 V
  • 1.8-V Compatible Control-Pin Inputs
  • IOFF Supports Partial Power-Down Mode Operation
  • ron = 10 Ω Maximum
  • Δron <0.35 Ω Typical
  • Cio(ON) = 6 pF Typical
  • Low Power Consumption (1 µA Maximum)
  • ESD Performance Tested Per JESD 22
    • 6000-V Human-Body Model
      (A114-B, Class II)
    • 1000-V Charged-Device Model (C101)
    • 250-V Machine Model (A115-A)
  • Wide –3-dB Bandwidth = 1220 MHz Typical
  • Packaged in 8-Pin TQFN (1.5 mm × 1.5 mm)

The TS3USB31 is a 1:1 SPST high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals. This device comes in a small UQFN package for use in a handset or consumer applications, such as cell phones, digital cameras, and notebooks with hubs. The wide bandwidth (750 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).

The TS3USB31 is a 1:1 SPST high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals. This device comes in a small UQFN package for use in a handset or consumer applications, such as cell phones, digital cameras, and notebooks with hubs. The wide bandwidth (750 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TS3USB221A ACTIVO Interruptor multiplexor/demultiplexor USB 2.0 de alta velocidad y 1:2 con activación única y protecc The referenced device is an enhanced pinout option allowing flow through board layout.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Tipo Título Fecha
* Data sheet TS3USB31 1:1 SPST High-Speed USB 2.0 (480-Mbps) Bus Isolation Switch With Single Enable datasheet (Rev. E) PDF | HTML 25 ago 2016
Application note Passive Mux Selection Based On Bandwidth (Rev. A) PDF | HTML 31 jul 2024
Application note High-Speed Layout Guidelines for Signal Conditioners and USB Hubs 14 jun 2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación

HSPICE Model for TS3USB31

SCDJ042.ZIP (95 KB) - HSpice Model
Modelo de simulación

TS3USB31 IBIS Model

SCDM099.ZIP (16 KB) - IBIS Model
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
UQFN (RSE) 8 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos