Inicio Administración de potencia Controladores de compuertas Controladores de medio puente
Inicio
Administración de potencia
Controladores de compuertas
Controladores de medio puente

UCC27710

ACTIVO

Controlador de puerta de medio puente de 0.5 A/1.0 A y 620 V con bloqueo

Haga su pedido ahora
Hoja de datos

UCC27710

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Bootstrap supply voltage (max) (V) 700 Power switch IGBT, MOSFET Input supply voltage (min) (V) 10 Input supply voltage (max) (V) 20 Peak output current (A) 1 Operating temperature range (°C) -40 to 150 Undervoltage lockout (typ) (V) 10 Rating Catalog Propagation delay time (µs) 0.14 Rise time (ns) 35 Fall time (ns) 16 Iq (mA) 0.25 Input threshold CMOS, TTL Channel input logic Noninverting Switch node voltage (V) -11 Features Dead time control, Interlock Driver configuration CMOS compatible, Dual, Noninverting, TTL compatible
Bootstrap supply voltage (max) (V) 700 Power switch IGBT, MOSFET Input supply voltage (min) (V) 10 Input supply voltage (max) (V) 20 Peak output current (A) 1 Operating temperature range (°C) -40 to 150 Undervoltage lockout (typ) (V) 10 Rating Catalog Propagation delay time (µs) 0.14 Rise time (ns) 35 Fall time (ns) 16 Iq (mA) 0.25 Input threshold CMOS, TTL Channel input logic Noninverting Switch node voltage (V) -11 Features Dead time control, Interlock Driver configuration CMOS compatible, Dual, Noninverting, TTL compatible
SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm)
  • High-Side and Low-Side Configuration
  • Dual Inputs With Output Interlock and 150-ns Deadtime
  • Fully Operational up to 620-V, 700-V Absolute Maximum on HB Pin
  • 10-V to 20-V VDD Recommended Range
  • Peak Output Current 0.5-A Source, 1.0-A Sink
  • dv/dt Immunity of 50 V/ns
  • Logic Operational up to –11 V on HS Pin
  • Negative Voltage Tolerance On Inputs of –5 V
  • Large Negative Transient Safe Operating Area
  • UVLO Protection for Both Channels
  • Small Propagation Delay (140 ns Typical)
  • Delay Matching (8 ns Typical)
  • Floating Channel Designed for Bootstrap Operation
  • Low Quiescent Current
  • TTL and CMOS Compatible Inputs
  • Industry Standard SOIC-8 Package
  • All Parameters Specified Over Temperature Range, –40 °C to +125 °C
  • High-Side and Low-Side Configuration
  • Dual Inputs With Output Interlock and 150-ns Deadtime
  • Fully Operational up to 620-V, 700-V Absolute Maximum on HB Pin
  • 10-V to 20-V VDD Recommended Range
  • Peak Output Current 0.5-A Source, 1.0-A Sink
  • dv/dt Immunity of 50 V/ns
  • Logic Operational up to –11 V on HS Pin
  • Negative Voltage Tolerance On Inputs of –5 V
  • Large Negative Transient Safe Operating Area
  • UVLO Protection for Both Channels
  • Small Propagation Delay (140 ns Typical)
  • Delay Matching (8 ns Typical)
  • Floating Channel Designed for Bootstrap Operation
  • Low Quiescent Current
  • TTL and CMOS Compatible Inputs
  • Industry Standard SOIC-8 Package
  • All Parameters Specified Over Temperature Range, –40 °C to +125 °C

The UCC27710 is a 620-V high-side and low-side gate driver with 0.5-A source, 1.0-A sink current, targeted to drive power MOSFETs or IGBTs.

The recommended VDD operating voltage is 10-V to 20-V for IGBT’s and 10-V to 17-V for power MOSFETs.

The UCC27710 includes protection features where the outputs are held low when the inputs are left open or when the minimum input pulse width specification is not met. Interlock and deadtime functions prevent both outputs from being turned on simultaneously. In addition, the device accepts a wide range bias supply range from 10 V to 20 V, and offers UVLO protection for both the VDD and HB bias supply.

Developed with TI’s state of the art high-voltage device technology, the device features robust drive with excellent noise and transient immunity including large negative voltage tolerance on its inputs, high dV/dt tolerance, wide negative transient safe operating area (NTSOA) on the switch node (HS), and interlock.

The device consists of one ground-referenced channel (LO) and one floating channel (HO) which is designed for operating with bootstrap or isolated power supplies. The device features fast propagation delays and excellent delay matching between both channels. On the UCC27710, each channel is controlled by its respective input pins, HI and LI.

The UCC27710 is a 620-V high-side and low-side gate driver with 0.5-A source, 1.0-A sink current, targeted to drive power MOSFETs or IGBTs.

The recommended VDD operating voltage is 10-V to 20-V for IGBT’s and 10-V to 17-V for power MOSFETs.

The UCC27710 includes protection features where the outputs are held low when the inputs are left open or when the minimum input pulse width specification is not met. Interlock and deadtime functions prevent both outputs from being turned on simultaneously. In addition, the device accepts a wide range bias supply range from 10 V to 20 V, and offers UVLO protection for both the VDD and HB bias supply.

Developed with TI’s state of the art high-voltage device technology, the device features robust drive with excellent noise and transient immunity including large negative voltage tolerance on its inputs, high dV/dt tolerance, wide negative transient safe operating area (NTSOA) on the switch node (HS), and interlock.

The device consists of one ground-referenced channel (LO) and one floating channel (HO) which is designed for operating with bootstrap or isolated power supplies. The device features fast propagation delays and excellent delay matching between both channels. On the UCC27710, each channel is controlled by its respective input pins, HI and LI.
filter Buscar otro/a Controladores de medio puente
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
LM2101 ACTIVO Controlador de compuerta de medio puente de 107 V, 0.5 A/0.8 A con UVLO de 8 V More recent pin-to-pin device with lower voltage rating

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 17
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos UCC27710 620-V, 0.5-A, 1.0-A High-Side Low-Side Gate Driver with Interlock datasheet (Rev. B) PDF | HTML 30/08/2018
Nota sobre la aplicación External vs. Internal Bootstrap Diode: Tradeoffs and Considerations PDF | HTML 5/01/2026
Nota sobre la aplicación Selecting Gate Drivers for HVAC Systems (Rev. A) PDF | HTML 7/11/2025
Nota sobre la aplicación Using Half-Bridge Gate Driver to Achieve 100% Duty Cycle for High Side FET PDF | HTML 25/03/2024
Nota sobre la aplicación Review of Different Power Factor Correction (PFC) Topologies' Gate Driver Needs PDF | HTML 22/01/2024
Nota sobre la aplicación How to Choose a Gate Driver for DC Motor Drives PDF | HTML 5/10/2023
Nota sobre la aplicación Bootstrap Circuitry Selection for Half Bridge Configurations (Rev. A) PDF | HTML 8/09/2023
Nota sobre la aplicación Comparative Analysis of Two Different Methods for Gate-Drive Current Boosting (Rev. A) PDF | HTML 17/02/2022
Nota sobre la aplicación Voltage Fed Full Bridge DC-DC & DC-AC Converter High-Freq Inverter Using C2000 (Rev. D) 7/04/2021
Más documentación Troubleshooting gate drive circuits in automotive and industrial applications 23/03/2021
Nota sobre la aplicación Implementing High-Side Switches Using Half-Bridge Gate Drivers for 48-V Battery. 12/05/2020
Application brief External Gate Resistor Selection Guide (Rev. A) 28/02/2020
Application brief Understanding Peak IOH and IOL Currents (Rev. A) 28/02/2020
Más documentación Fundamentals of MOSFET and IGBT Gate Driver Circuits (Replaces SLUP169) (Rev. A) 29/10/2018
Artículo técnico How to achieve higher system robustness in DC drives, part 3: minimum input pulse PDF | HTML 19/09/2018
Artículo técnico How to achieve higher system robustness in DC drives, part 2: interlock and deadti PDF | HTML 30/05/2018
Artículo técnico How to achieve higher system robustness in DC drives, part 1: negative voltage PDF | HTML 17/04/2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

UCC27710EVM-005 — Módulo de evaluación UCC27710 de controlador de puerta de lado bajo y lado alto de 620 V y 0.5 A/1.0

El UCC27710EVM-005 está diseñado para evaluar el UCC27710D, un controlador de puerta de medio puente de 620 V con una adecuada capacidad de corriente máxima de fuente y disipador. Este EVM podría utilizarse para evaluar el IC del controlador según su ficha técnica. El EVM también se puede utilizar (...)
Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

UCC27710 PSpice Transient Model

SLUM591.ZIP (69 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

UCC27710 Unencrypted PSpice Transient Model

SLUM634.ZIP (3 KB) - Modelo PSpice
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOIC (D) 8 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos