Inicio Administración de potencia Secuenciadores
Inicio
Administración de potencia
Secuenciadores

UCD90124

ACTIVO

Secuenciador de 12 carriles y controlador de estado del sistema con control del ventilador

Haga su pedido ahora
Hoja de datos

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
UCD90124A ACTIVO Secuenciador de 12 carriles y monitor de estado del sistema con control del ventilador y soporte ACP This product has an increased set of features.

UCD90124

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of supplies monitored 13 Number of sequenced outputs 12 Rating Catalog Iq (typ) (mA) 50 Operating temperature range (°C) -40 to 125
Number of supplies monitored 13 Number of sequenced outputs 12 Rating Catalog Iq (typ) (mA) 50 Operating temperature range (°C) -40 to 125
VQFN (RGC) 64 81 mm² (9 mm × 9 mm)
  • Monitor and Sequence 12 Voltage Rails
    • All Rails Sampled Every 400 µs
    • 12-bit ADC With 2.5-V, 0.5% Internal VREF
    • Sequence Based on Time, Rail and Pin Dependencies
    • Four Programmable Undervoltage and Overvoltage
      Thresholds per Monitor
  • Fan Control and Monitoring
    • Supports Four Fans With Five User-Defined
      Speed-vs-Temperature Setpoints
    • Supports Two-, Three-, and Four-Wire Fans
  • Nonvolatile Error and Peak-Value Logging per Monitor
    (up to 10 Fault Detail Entries)
  • Closed-Loop Margining for 10 Rails
    • Margin Output Adjusts Rail Voltage to Match
      User-Defined Margin Thresholds
  • Programmable Watchdog Timer and System Reset
  • Flexible Digital I/O Configuration
  • Multiphase PWM Clock Generator
    • Clock Frequencies From 15.259 kHz to 125 MHz
    • Capability to Configure Independent Clock Outputs for
      Synchronizing Switch-Mode Power Supplies
  • Internal Temperature Sensor
  • JTAG and I2C/SMBus/PMBus™ Interfaces
  • APPLICATIONS
    • Industrial / ATE
    • Telecommunications and Networking Equipment
    • Servers and Storage Systems
    • Embedded Computing
    • Any System Requiring Sequencing and Monitoring of
      Multiple Power Rails

PMBus, Fusion Digital Power are trademarks of Texas Instruments.
  • Monitor and Sequence 12 Voltage Rails
    • All Rails Sampled Every 400 µs
    • 12-bit ADC With 2.5-V, 0.5% Internal VREF
    • Sequence Based on Time, Rail and Pin Dependencies
    • Four Programmable Undervoltage and Overvoltage
      Thresholds per Monitor
  • Fan Control and Monitoring
    • Supports Four Fans With Five User-Defined
      Speed-vs-Temperature Setpoints
    • Supports Two-, Three-, and Four-Wire Fans
  • Nonvolatile Error and Peak-Value Logging per Monitor
    (up to 10 Fault Detail Entries)
  • Closed-Loop Margining for 10 Rails
    • Margin Output Adjusts Rail Voltage to Match
      User-Defined Margin Thresholds
  • Programmable Watchdog Timer and System Reset
  • Flexible Digital I/O Configuration
  • Multiphase PWM Clock Generator
    • Clock Frequencies From 15.259 kHz to 125 MHz
    • Capability to Configure Independent Clock Outputs for
      Synchronizing Switch-Mode Power Supplies
  • Internal Temperature Sensor
  • JTAG and I2C/SMBus/PMBus™ Interfaces
  • APPLICATIONS
    • Industrial / ATE
    • Telecommunications and Networking Equipment
    • Servers and Storage Systems
    • Embedded Computing
    • Any System Requiring Sequencing and Monitoring of
      Multiple Power Rails

PMBus, Fusion Digital Power are trademarks of Texas Instruments.

The UCD90124 is a 12-rail PMBus/I2C addressable power-supply sequencer and system-health monitor. The device integrates a 12-bit ADC for monitoring up to 13 power-supply voltage, current, or temperature inputs. Twenty-six GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading, or other system functions. Twelve of these pins offer PWM functionality. Using these pins, the UCD90124 offers support for fan control, margining, and general-purpose PWM functions.

Fan-control signals can be sent using PMBus commands or generated from one of two built-in fan-control algorithms. PWM outputs combined with temperature and fan-speed measurements provide a complete fan-control solution for up to four independent fans.

The TI Fusion Digital Power designer software is provided for device configuration. This PC-based graphical user interface (GUI) offers an intuitive interface for configuring, storing, and monitoring all system operating parameters.

The UCD90124 is a 12-rail PMBus/I2C addressable power-supply sequencer and system-health monitor. The device integrates a 12-bit ADC for monitoring up to 13 power-supply voltage, current, or temperature inputs. Twenty-six GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading, or other system functions. Twelve of these pins offer PWM functionality. Using these pins, the UCD90124 offers support for fan control, margining, and general-purpose PWM functions.

Fan-control signals can be sent using PMBus commands or generated from one of two built-in fan-control algorithms. PWM outputs combined with temperature and fan-speed measurements provide a complete fan-control solution for up to four independent fans.

The TI Fusion Digital Power designer software is provided for device configuration. This PC-based graphical user interface (GUI) offers an intuitive interface for configuring, storing, and monitoring all system operating parameters.
filter Buscar otro/a Secuenciadores
Descargar Ver vídeo con transcripción Video

La referencia de comandos PMBus™ UCD90xxx más actualizada está disponible en https://www.ti.com/fusiondocs

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 7
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos UCD90124 12-Rail Sequencer and System Health Monitor With Fan Control datasheet (Rev. B) 3/09/2010
* Errata Errata Report for the UCD90120 and UCD90124 Devices 26/04/2010
Nota sobre la aplicación Design Voltage Margining Circuit for UCD90xxx Power Sequencer and System Manager (Rev. A) 21/05/2019
Nota sobre la aplicación UCD90xxx Family Frequently Asked Questions and Answers (Rev. B) 12/04/2019
Guía del usuario UCD90xxx Sequencer and System Health Controller PMBus™ Command Reference (Rev. G) 3/04/2019
Nota sobre la aplicación Monitoring Voltage, Current and Temperature Using the UCD9012x 23/03/2012
Guía del usuario UCD90SEQ64EVM-650: 64-Pin Sequencer Development Board 27/12/2010

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

UCD90SEQ64EVM-650 — Módulo de evaluación UCD90xxx para secuenciador de 64 pines y monitor de estado del sistema

The UCD90SEQ64EVM-650 is a fully assembled and tested circuit for evaluating the 64-pin Sequencer and System Health Controller, including the UCD90120, UCD90124, UCD90120A, UCD90124A, UCD90910 and UCD90160.

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
IDE, configuración, compilador o depurador

SLVC223 — Fusion Digital Power Designer for Sequencer Devices v1.7.71

Productos y hardware compatibles
Software de aplicación y estructura

FUSION_DIGITAL_POWER_DESIGNER — Software de potencia digital

El software de interfaz gráfica de usuario (GUI) Fusion Digital Power™ se utiliza para configurar y supervisar determinados controladores digitales de alimentación y secuenciadores/monitores de estado de Texas Instruments. La aplicación utiliza el protocolo PMBus para comunicarse con el dispositivo (...)

Productos y hardware compatibles
Software de aplicación y estructura

FUSION_MFR_GUI — Herramienta de fabricación de Fusion Digital Power

The Fusion Digital Power Manufacturing Tool (aka MFR GUI) is a Graphical User Interface used to download firmware, upgrade firmware, configure, calibrate and test .

The MFR GUI supports the same devices as Fusion Digital Power Designer software.  This tool is typically used in manufacturing (...)

Productos y hardware compatibles
Modelo de simulación

UCD90124 BSDL

SLVC319.ZIP (2 KB) - Modelo BSDL
Productos y hardware compatibles
Herramienta de cálculo

SLVC676 — UCD90xxx Voltage Margining Circuit Design Tool

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RGC) 64 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos