ホーム データ コンバータ A/D コンバータ (ADC) 高速 ADC (10MSPS 超過)
ホーム
データ コンバータ
A/D コンバータ (ADC)
高速 ADC (10MSPS 超過)

ADS5204-Q1

生産中止品

車載アプリケーション向け認証済み、デュアルチャネル、10 ビット、40MSPS A/D コンバータ

ご注文はこちら
データシート
ADS5204-Q1 は生産中止品です。
この製品は生産中止品です。新規設計では代替品をご検討ください。
open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品。
ADC10040-Q1 アクティブ 車載アプリケーション向け認証済み、10 ビット、40MSPS A/D コンバータ (ADC) This product is an enhanced stereo codec with enhanced digital effects
ADC10DL065 アクティブ デュアルチャネル、10 ビット、65-MSPS、A/D コンバータ (ADC) This product is an enhanced stereo codec with enhanced digital effects

ADS5204-Q1

生産中止品
データシート ご注文はこちら

製品詳細

Sample rate (max) (Msps) 40 Resolution (Bits) 10 Number of input channels 2 Interface type Parallel CMOS, TTL Analog input BW (MHz) 300 Features Low Power Rating Automotive Peak-to-peak input voltage range (V) 2 Power consumption (typ) (mW) 275 Architecture Pipeline SNR (dB) 60.5 ENOB (Bits) 9.7 SFDR (dB) 75 Operating temperature range (°C) -40 to 85 Input buffer Yes
Sample rate (max) (Msps) 40 Resolution (Bits) 10 Number of input channels 2 Interface type Parallel CMOS, TTL Analog input BW (MHz) 300 Features Low Power Rating Automotive Peak-to-peak input voltage range (V) 2 Power consumption (typ) (mW) 275 Architecture Pipeline SNR (dB) 60.5 ENOB (Bits) 9.7 SFDR (dB) 75 Operating temperature range (°C) -40 to 85 Input buffer Yes
TQFP (PFB) 48 81 mm² (9 mm × 9 mm)
  • Qualified for Automotive Applications
  • 3.3-V Single-Supply Operation
  • Dual Simultaneous Sample-and-Hold Inputs
  • Differential or Single-Ended Analog Inputs
  • Programmable Gain Amplifier: 0 dB to 18 dB
  • Separate Serial Control Interface
  • Single or Dual Parallel Bus Output
  • 60-dB SNR at fIN = 10.5 MHz
  • 73-dB SFDR at fIN = 10.5 MHz
  • Low Power: 275 mW
  • 300-MHz Analog Input Bandwidth
  • 3.3-V TTL/CMOS-Compatible Digital I/O
  • Internal or External Reference
  • Adjustable Reference Input Range
  • Power-Down (Standby) Mode
  • TQFP-48 Package
  • APPLICATIONS
    • Digital Communications (Baseband Sampling)
    • Portable Instrumentation
    • Video Processing
  • Qualified for Automotive Applications
  • 3.3-V Single-Supply Operation
  • Dual Simultaneous Sample-and-Hold Inputs
  • Differential or Single-Ended Analog Inputs
  • Programmable Gain Amplifier: 0 dB to 18 dB
  • Separate Serial Control Interface
  • Single or Dual Parallel Bus Output
  • 60-dB SNR at fIN = 10.5 MHz
  • 73-dB SFDR at fIN = 10.5 MHz
  • Low Power: 275 mW
  • 300-MHz Analog Input Bandwidth
  • 3.3-V TTL/CMOS-Compatible Digital I/O
  • Internal or External Reference
  • Adjustable Reference Input Range
  • Power-Down (Standby) Mode
  • TQFP-48 Package
  • APPLICATIONS
    • Digital Communications (Baseband Sampling)
    • Portable Instrumentation
    • Video Processing

The ADS5204 is a dual 10-bit, 40 MSPS analog-to-digital converter (ADC). It simultaneously converts each analog input signal into a 10-bit, binary coded digital word up to a maximum sampling rate of 40 MSPS per channel. All digital inputs and outputs are 3.3-V TTL/CMOS compatible.

An innovative dual pipeline architecture implemented in a CMOS process and the 3.3-V supply results in very low power dissipation. In order to provide maximum flexibility, both top and bottom voltage references can be set from user-supplied voltages. Alternatively, if no external references are available, the on-chip internal references can be used. Both ADCs share a common reference to improve offset and gain matching. If external reference voltage levels are available, the internal references can be powered down independently from the rest of the chip, resulting in even greater power savings.

The ADS5204 also features dual, onboard programmable gain amplifiers (PGAs) that allow a setting of 0 dB to 18 dB to adjust the gain of each set of inputs in order to match the amplitude of the incoming signal.

The ADS5204 is characterized for operation from –40°C to +85°C and is available in a TQFP-48 package.

The ADS5204 is a dual 10-bit, 40 MSPS analog-to-digital converter (ADC). It simultaneously converts each analog input signal into a 10-bit, binary coded digital word up to a maximum sampling rate of 40 MSPS per channel. All digital inputs and outputs are 3.3-V TTL/CMOS compatible.

An innovative dual pipeline architecture implemented in a CMOS process and the 3.3-V supply results in very low power dissipation. In order to provide maximum flexibility, both top and bottom voltage references can be set from user-supplied voltages. Alternatively, if no external references are available, the on-chip internal references can be used. Both ADCs share a common reference to improve offset and gain matching. If external reference voltage levels are available, the internal references can be powered down independently from the rest of the chip, resulting in even greater power savings.

The ADS5204 also features dual, onboard programmable gain amplifiers (PGAs) that allow a setting of 0 dB to 18 dB to adjust the gain of each set of inputs in order to match the amplitude of the incoming signal.

The ADS5204 is characterized for operation from –40°C to +85°C and is available in a TQFP-48 package.
filter その他の 高速 ADC (10MSPS 超過) を検索
ダウンロード

技術資料

結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
上位の文書 タイプ タイトル フォーマットオプション 最新の英語版をダウンロード 日付
* データシート Dual 10-Bit 40MSPS Low-Power ADC With PGA データシート (Rev. A) 2008/06/23

購入と品質