ADS5407
- Dual Channel
- 12-Bit Resolution
- Maximum Clock Rate: 500 Msps
- Low Swing Fullscale Input: 1.25 Vpp
- Analog Input Buffer with High Impedance Input
- Input Bandwidth (3dB): >1.0 GHz
- Data Output Interface: DDR LVDS
- Optional 2x Decimation with Low Pass or
High Pass Filter - 196-Pin BGA Package (12 × 12mm)
The ADS5407 is a high linearity dual channel 12-bit, 500 MSPS analog-to-digital converter (ADC) easing front end filter design for wide bandwidth receivers. The analog input buffer isolates the internal switching of the on-chip track-and-hold from disturbing the signal source as well as providing a high-impedance input. Optionally the output data can be decimated by two. Designed for high SFDR, the ADC has low-noise performance and outstanding spurious-free dynamic range over a large input-frequency range. The device is available in a 196 pin BGA package and is specified over the full industrial temperature range (–40°C to 85°C).
技術資料
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| * | データシート | Dual Channel 12-Bit 500 Msps Analog to Digital Converter データシート (Rev. B) | 2014/01/08 | |||
| その他の技術資料 | Comparing Power-Supply Architectures for a 12-bit ADC | 2017/07/25 | ||||
| 技術記事 | Do you always need a LDO in front of your data converter? | PDF | HTML | 2016/12/22 | |||
| アプリケーション・ノート | Design Considerations for Avoiding Timing Errors during High-Speed ADC, LVDS Dat (Rev. A) | 2015/05/22 | ||||
| アプリケーション・ノート | Why Use Oversampling when Undersampling Can Do the Job? (Rev. A) | 2013/07/19 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
アナログ エンジニア向けカリキュレータは、アナログ回路設計エンジニアが日常的に使用する反復的な計算の多くを迅速化します。この PC ベース ツールはグラフィカル インターフェイスにより、帰還抵抗を使用したオペアンプのゲイン設定から、A/D コンバータ (ADC) のドライブ バッファ回路の安定化に最適な部品の選択に至るまで、一般的に行われている各種計算のリストを表示します。
スタンドアロン ツールとして使用できるほか、『アナログ回路設計式一覧ポケット ガイド』で説明されているコンセプトと組み合わせることもできます。
SBAC119 — TIGAR (Texas Instruments Graphical Evaluation of ADC Response Tool)
PMP9767 — 12 ビット 500MSPS ADC 向け、高効率、LDO 不要電源リファレンス デザイン
データ コンバータの電気的性能は、電源電圧のクリーンさに依存します。リニア レギュレータ (LDO) は一般的に使用されますが、効率が低く電力損失が大きいため、携帯機器用途には適していません。
その代わりに、TPS62231 や TPS62237 などのスイッチ モード電源 (SMPS) を使用することで、コスト効率が高く効率的な電源ソリューションを実現できます。このようなソリューションは、12 ビット ADS540x ファミリの A/D コンバータ (ADC) の性能を低下させることなく、過剰な電力消費も抑えることができます。このテスト レポートでは、2 つの電源間の信号対雑音比 (SNR) (...)
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| NFBGA (ZAY) | 196 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。