ホーム パワー マネージメント DC/DC スイッチング レギュレータ DC/DC コンバータ

LM2593HV

アクティブ

各種機能搭載、SIMPLE SWITCHER パワー コンバータ、150kHz、2A、降圧型電圧レギュレータ

この製品には新バージョンがあります

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品。
LMR36520 アクティブ 26μA の静止電流 (IQ)、SIMPLE SWITCHER®、4.2V ~ 65V、2A 同期整流降圧コンバータ Higher Fsw, better efficiency, lower EMI and lower IQ.
TPSM5601R5H アクティブ Enhanced HotRod™ QFN パッケージ封止、60V 入力、1V ~ 16V 出力、1.5A パワー モジュール Save board space, simplify design and speed time to market with an integrated-inductor power module.

製品詳細

Rating Catalog Topology Buck Iout (max) (A) 2 Vin (max) (V) 60 Vin (min) (V) 4.5 Vout (max) (V) 57 Vout (min) (V) 1.2 Features Over Current Protection, Power good Control mode Voltage mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.005 Duty cycle (max) (%) 100
Rating Catalog Topology Buck Iout (max) (A) 2 Vin (max) (V) 60 Vin (min) (V) 4.5 Vout (max) (V) 57 Vout (min) (V) 1.2 Features Over Current Protection, Power good Control mode Voltage mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.005 Duty cycle (max) (%) 100
TO-263 (KTW) 7 153.924 mm² (10.1 mm × 15.24 mm) TO-220 (NDZ) 7 82.6008 mm² (10.16 mm × 8.13 mm)
  • 3.3-V, 5-V, and Adjustable Output Versions
  • Adjustable Version Output Voltage Range: 1.2 V
    to 57 V ±4% Maximum Over Line and Load
    Conditions
  • Ensured 2-A Output Load Current
  • Available in 7-Pin TO-220 and TO-263 (Surface-
    Mount) Package
  • Input Voltage Range up to 60 V
  • 150-kHz Fixed Frequency Internal Oscillator
  • Shutdown and Soft-Start
  • Out-of-Regulation Error Flag
  • Error Flag Delay
  • Low Power Standby Mode: IQ, Typically 90 µA
  • High Efficiency
  • Thermal Shutdown and Current-Limit Protection
  • 3.3-V, 5-V, and Adjustable Output Versions
  • Adjustable Version Output Voltage Range: 1.2 V
    to 57 V ±4% Maximum Over Line and Load
    Conditions
  • Ensured 2-A Output Load Current
  • Available in 7-Pin TO-220 and TO-263 (Surface-
    Mount) Package
  • Input Voltage Range up to 60 V
  • 150-kHz Fixed Frequency Internal Oscillator
  • Shutdown and Soft-Start
  • Out-of-Regulation Error Flag
  • Error Flag Delay
  • Low Power Standby Mode: IQ, Typically 90 µA
  • High Efficiency
  • Thermal Shutdown and Current-Limit Protection

The LM2593HV series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 2-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3-V, 5-V, and an adjustable output version.

This series of switching regulators is similar to the LM2592HV with additional supervisory and performance features.

Requiring a minimum number of external components, these regulators are simple to use and include internal frequency compensation, improved line and load specifications, fixed-frequency oscillator, Shutdown/Soft-start, output error flag, and flag delay.

The LM2593HV operates at a switching frequency of 150 kHz, thus allowing smaller sized filter components than what would be needed with lower frequency switching regulators. Available in a standard 7-pin TO-220 package with several different lead bend options, and a 7-pin TO-263 surface-mount package.

Other features include a specified ±4% tolerance on output voltage under all conditions of input voltage and output load conditions, and ±15% on the oscillator frequency. External shutdown is included, featuring typically 90-µA standby current. Self-protection features include a two stage current limit for the output switch and an overtemperature shutdown for complete protection under fault conditions.

The LM2593HV series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 2-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3-V, 5-V, and an adjustable output version.

This series of switching regulators is similar to the LM2592HV with additional supervisory and performance features.

Requiring a minimum number of external components, these regulators are simple to use and include internal frequency compensation, improved line and load specifications, fixed-frequency oscillator, Shutdown/Soft-start, output error flag, and flag delay.

The LM2593HV operates at a switching frequency of 150 kHz, thus allowing smaller sized filter components than what would be needed with lower frequency switching regulators. Available in a standard 7-pin TO-220 package with several different lead bend options, and a 7-pin TO-263 surface-mount package.

Other features include a specified ±4% tolerance on output voltage under all conditions of input voltage and output load conditions, and ±15% on the oscillator frequency. External shutdown is included, featuring typically 90-µA standby current. Self-protection features include a two stage current limit for the output switch and an overtemperature shutdown for complete protection under fault conditions.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品。
LM76002 アクティブ 3.5V ~ 60V、2.5A の同期整流降圧電圧コンバータ Next-generation 3.5-V to 60-V, 2.5-A synchronous step-down voltage converter.

技術資料

結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
23 をすべて表示
上位の文書 タイプ タイトル フォーマットオプション 最新の英語版をダウンロード 日付
* データシート LM2593HV SIMPLE SWITCHER® Power Converter 150-kHz, 2-A Step-Down Voltage Regulator データシート (Rev. E) PDF | HTML 2016/05/31
アプリケーション・ノート 半導体および IC パッケージの熱評価基準 (Rev. D 翻訳版) PDF | HTML 英語版 (Rev.D) PDF | HTML 2025/05/08
技術記事 How to increase system reliability and simplify design using DC/DC converters PDF | HTML 2016/06/13
技術記事 The importance of accurate switching frequency and current limit when selecting bu PDF | HTML 2016/04/19
技術記事 Advantages of leaded packages in robust industrial designs PDF | HTML 2016/03/08
アプリケーション・ノート Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 2014/09/12
アプリケーション・ノート AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013/04/24
アプリケーション・ノート AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 2013/04/23
アプリケーション・ノート AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013/04/23
アプリケーション・ノート AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 2013/04/23
アプリケーション・ノート AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 2013/04/23
アプリケーション・ノート AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013/04/23
アプリケーション・ノート AN-1081 Low-Cost Low-Parts-Count DC/DC Converter With Multiple Outputs (Rev. B) 2013/04/23
アプリケーション・ノート AN-1197 Selecting Inductors for Buck Converters (Rev. B) 2013/04/23
アプリケーション・ノート AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 2013/04/23
アプリケーション・ノート AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 2013/04/23
アプリケーション・ノート Simple Techniques Minimize Cross-Coupling in Distributed Power Systems 2007/03/21
アプリケーション・ノート Input and Output Capacitor Selection 2005/09/19
その他の技術資料 SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005/07/12
アプリケーション・ノート AN-643 EMI/RFI Board Design (Rev. B) 2004/05/03
アプリケーション・ノート Application Note 1246 Stresses in Wide Input DC-DC Converters (jp) 2004/05/01
ホワイト・ペーパー Comparing Topologies and the (Design) Rules of the Game 2003/03/01
ホワイト・ペーパー Reducing Converter Stresses 2002/11/01

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

シミュレーション・モデル

LM2593HV-ADJ PSpice Transient Model

SNVMAK8.ZIP (67 KB) - PSpice モデル
サポート対象の製品とハードウェア
シミュレーション・モデル

LM2593HV-ADJ Unencrypted PSpice Transient Model

SNVMAK9.ZIP (3 KB) - PSpice モデル
サポート対象の製品とハードウェア
パッケージ ピン数 CAD シンボル、フットプリント、および 3D モデル
TO-263 (KTW) 7 Ultra Librarian
TO-220 (NDZ) 7 Ultra Librarian

購入と品質

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ