ホーム パワー・マネージメント マルチチャネル IC (PMIC)

ポスト・リニア・レギュレータ・システム内蔵、低ノイズ・リニア・レギュレータ搭載、降圧 DC/DC コンバータ

製品詳細

Regulated outputs (#) 3 Configurability Factory programmable Vin (min) (V) 2.7 Vin (max) (V) 5.5 Iout (max) (A) 0.9 Step-up DC/DC converter 0 Step-down DC/DC converter 1 Step-down DC/DC controller 0 Step-up DC/DC controller 0 LDO 2 Iq (typ) (mA) 0.07 Rating Catalog Switching frequency (max) (kHz) 3400 Operating temperature range (°C) -30 to 85 Processor supplier Generic Processor name Generic Shutdown current (ISD) (typ) (µA) 2.5 Switching frequency (typ) (kHz) 3000
Regulated outputs (#) 3 Configurability Factory programmable Vin (min) (V) 2.7 Vin (max) (V) 5.5 Iout (max) (A) 0.9 Step-up DC/DC converter 0 Step-down DC/DC converter 1 Step-down DC/DC controller 0 Step-up DC/DC controller 0 LDO 2 Iq (typ) (mA) 0.07 Rating Catalog Switching frequency (max) (kHz) 3400 Operating temperature range (°C) -30 to 85 Processor supplier Generic Processor name Generic Shutdown current (ISD) (typ) (µA) 2.5 Switching frequency (typ) (kHz) 3000
DSBGA (YZR) 12 3.9375 mm² 2.25 x 1.75
  • DC-DC Regulator
    • VOUT_DCDC = 1.2 V to 2.5 V
    • 600-mA Maximum ILOAD
    • 3-MHz Typical PWM Fixed Switching Frequency
    • Automatic PFM/PWM Mode Switching
    • Internal Synchronous Rectification
    • Internal Soft Start
  • Dual-Rail Linear Regulator: LILO
    • Load Transients < 50-mV Peak Typical
    • Line Transients < 1-mV Peak Typical
    • VOUT_LILO = 0.7 V to 2 V
    • 70-µA Typical IQ and 300-mA Maximum ILOAD
  • Linear Regulator: LDO
    • Load Transients < 80-mV Peak Typical
    • Line Transients < 1-mV Peak Typical
    • VOUT_LDO = 1.5 V to 3.3 V
    • 50-µA Typical IQ and 350-mA Maximum ILOAD
  • Combined Global Features
    • VBATT ≥ Maximum (VOUT_LILO + 1.5 V, 2.7 V)
    • Operates From a Single Li-Ion Cell or 3-Cell NiMH/NiCd Batteries
    • 100-µA IQ and 900-mA Maximum ILOAD
  • DC-DC Regulator
    • VOUT_DCDC = 1.2 V to 2.5 V
    • 600-mA Maximum ILOAD
    • 3-MHz Typical PWM Fixed Switching Frequency
    • Automatic PFM/PWM Mode Switching
    • Internal Synchronous Rectification
    • Internal Soft Start
  • Dual-Rail Linear Regulator: LILO
    • Load Transients < 50-mV Peak Typical
    • Line Transients < 1-mV Peak Typical
    • VOUT_LILO = 0.7 V to 2 V
    • 70-µA Typical IQ and 300-mA Maximum ILOAD
  • Linear Regulator: LDO
    • Load Transients < 80-mV Peak Typical
    • Line Transients < 1-mV Peak Typical
    • VOUT_LDO = 1.5 V to 3.3 V
    • 50-µA Typical IQ and 350-mA Maximum ILOAD
  • Combined Global Features
    • VBATT ≥ Maximum (VOUT_LILO + 1.5 V, 2.7 V)
    • Operates From a Single Li-Ion Cell or 3-Cell NiMH/NiCd Batteries
    • 100-µA IQ and 900-mA Maximum ILOAD

The LM3686 is a step-down DC-DC converter with a very low-dropout linear regulator and a low-noise linear regulator optimized for powering ultra-low voltage circuits. It provides three outputs with combined load current up to 900 mA over an input voltage range from 2.7 V to 5.5 V.

The device offers superior features and performance for many applications. Automatic intelligent switching between PWM low-noise and PFM low-current mode offers improved system control. During full-power operation, a fixed-frequency 3 MHz (typical), PWM mode drives loads from approximately 70 mA to 600 mA maximum. Hysteretic PFM mode extends the battery life through reduction of the quiescent current to 28 μA (typical) at light load and system standby. Internal synchronous rectification provides high efficiency.

For all available packages, see the orderable addendum at the end of the data sheet.

All trademarks are the property of their respective owners.

Three enable (EN_x) pins allow the separate operation of either the DC-DC, post-regulation linear regulator, or the linear regulator alone. If the DC-DC is not enabled during start-up of the post-regulation linear regulator, a parallel small-pass transistor supplies the linear regulator from VBATT with maximal 50 mA. In the combined operation where both enables are raised together, the small-pass transistor is deactivated and the big pass transistor provides 350 mA output current. In shutdown mode (EN_x pins pulled low), the device turns off and reduces battery consumption to 2.5 μA (typical).

The LM3686 is available in a 12-pin DSBGA package. A high-switching frequency of 3 MHz (typical) allows the use of a few tiny surface-mount components. Only six external surface-mount components, an inductor and five ceramic capacitors, are required to establish a 15.66 mm2 total solution size.

The LM3686 is a step-down DC-DC converter with a very low-dropout linear regulator and a low-noise linear regulator optimized for powering ultra-low voltage circuits. It provides three outputs with combined load current up to 900 mA over an input voltage range from 2.7 V to 5.5 V.

The device offers superior features and performance for many applications. Automatic intelligent switching between PWM low-noise and PFM low-current mode offers improved system control. During full-power operation, a fixed-frequency 3 MHz (typical), PWM mode drives loads from approximately 70 mA to 600 mA maximum. Hysteretic PFM mode extends the battery life through reduction of the quiescent current to 28 μA (typical) at light load and system standby. Internal synchronous rectification provides high efficiency.

For all available packages, see the orderable addendum at the end of the data sheet.

All trademarks are the property of their respective owners.

Three enable (EN_x) pins allow the separate operation of either the DC-DC, post-regulation linear regulator, or the linear regulator alone. If the DC-DC is not enabled during start-up of the post-regulation linear regulator, a parallel small-pass transistor supplies the linear regulator from VBATT with maximal 50 mA. In the combined operation where both enables are raised together, the small-pass transistor is deactivated and the big pass transistor provides 350 mA output current. In shutdown mode (EN_x pins pulled low), the device turns off and reduces battery consumption to 2.5 μA (typical).

The LM3686 is available in a 12-pin DSBGA package. A high-switching frequency of 3 MHz (typical) allows the use of a few tiny surface-mount components. Only six external surface-mount components, an inductor and five ceramic capacitors, are required to establish a 15.66 mm2 total solution size.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
3 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM3686 Step-Down DC-DC Converter With Integrated Post Linear Regulators System And Low-Noise Linear Regulator データシート (Rev. F) PDF | HTML 2016年 11月 23日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
EVM ユーザー ガイド (英語) AN-1886 LM3686 Evaluation Board (Rev. A) 2013年 4月 30日

設計および開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

パッケージ ピン数 CAD シンボル、フットプリント、および 3D モデル
DSBGA (YZR) 12 Ultra Librarian

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ