TLV320AIC31

アクティブ

6 入力、6 出力、ヘッドホン / スピーカ・アンプと 3D エフェクト内蔵、低消費電力、ステレオ・コーデック

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと類似の機能
NEW TAC5142 プレビュー Hardware-control stereo audio codec with 100-dB dynamic range ADC, 106-dB dynamic range DAC PCM code with >10dB higher SNR for both ADC and DAC

製品詳細

Number of ADC channels 4 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R Analog inputs 6 Analog outputs 6 Sampling rate (max) (kHz) 96 Rating Catalog Features Matrix mixing, Phase-locked loop (PLL), Stereo headphone amplifier, Stereo speaker amplifier ADC SNR (typ) (dB) 90 DAC SNR (typ) (dB) 100 Operating temperature range (°C) -40 to 85
Number of ADC channels 4 Number of DAC channels 2 Digital audio interface DSP, I2S, L, R Analog inputs 6 Analog outputs 6 Sampling rate (max) (kHz) 96 Rating Catalog Features Matrix mixing, Phase-locked loop (PLL), Stereo headphone amplifier, Stereo speaker amplifier ADC SNR (typ) (dB) 90 DAC SNR (typ) (dB) 100 Operating temperature range (°C) -40 to 85
VQFN (RHB) 32 25 mm² 5 x 5
  • Stereo Audio DAC:
    • 100-dB (A-Weighted) Signal-to-Noise Ratio
    • 16-/20-/24-/32-Bit Data
    • Supports Rates From 8 kHz to 96 kHz
    • 3D/Bass/Treble/EQ/De-Emphasis Effects
  • Stereo Audio ADC:
    • 92-dB (A-Weighted) Signal-to-Noise Ratio
    • Supports Rates From 8 kHz to 96 kHz
  • Six Audio Input Pins:
    • Two Stereo Differential/Single-Ended Inputs
  • Six Audio Output Drivers:
    • Stereo 8-, 500-mW/Channel Speaker Drive Capability
    • Stereo Fully-Differential or Single-Ended Headphone Drivers
    • Fully Differential Stereo Line Outputs
  • Low Power: 14-mW Stereo, 48-kHz Playback With 3.3-V Analog Supply
  • Programmable Input/Output Analog Gains
  • Automatic Gain Control (AGC) for Recording
  • Programmable Microphone Bias Level
  • Programmable PLL for Flexible Clock Generation
  • I2C™ Control Bus
  • Audio Serial Data Bus Supports I2S™, Left-/Right-Justified, DSP, and TDM Modes
  • Extensive Modular Power Control
  • Power Supplies:
    • Analog: 2.7 V to 3.6 V
    • Digital Core: 1.65 V to 1.95 V
    • Digital I/O: 1.1 V to 3.6 V
  • Available Packages: 5-mm × 5-mm, 32-Pin QFN

I2C, I2S are trademarks of NXP Semiconductors.
All other trademarks are the property of their respective owners.

  • Stereo Audio DAC:
    • 100-dB (A-Weighted) Signal-to-Noise Ratio
    • 16-/20-/24-/32-Bit Data
    • Supports Rates From 8 kHz to 96 kHz
    • 3D/Bass/Treble/EQ/De-Emphasis Effects
  • Stereo Audio ADC:
    • 92-dB (A-Weighted) Signal-to-Noise Ratio
    • Supports Rates From 8 kHz to 96 kHz
  • Six Audio Input Pins:
    • Two Stereo Differential/Single-Ended Inputs
  • Six Audio Output Drivers:
    • Stereo 8-, 500-mW/Channel Speaker Drive Capability
    • Stereo Fully-Differential or Single-Ended Headphone Drivers
    • Fully Differential Stereo Line Outputs
  • Low Power: 14-mW Stereo, 48-kHz Playback With 3.3-V Analog Supply
  • Programmable Input/Output Analog Gains
  • Automatic Gain Control (AGC) for Recording
  • Programmable Microphone Bias Level
  • Programmable PLL for Flexible Clock Generation
  • I2C™ Control Bus
  • Audio Serial Data Bus Supports I2S™, Left-/Right-Justified, DSP, and TDM Modes
  • Extensive Modular Power Control
  • Power Supplies:
    • Analog: 2.7 V to 3.6 V
    • Digital Core: 1.65 V to 1.95 V
    • Digital I/O: 1.1 V to 3.6 V
  • Available Packages: 5-mm × 5-mm, 32-Pin QFN

I2C, I2S are trademarks of NXP Semiconductors.
All other trademarks are the property of their respective owners.

The TLV320AIC31 is a low-power stereo audio codec with a stereo headphone amplifier, as well as multiple inputs and outputs, programmable in single-ended or fully-differential configurations. Extensive register-based power control is included, enabling stereo 48-kHz digital-to-analog converter (DAC) playback as low as 14 mW from a 3.3-V analog supply, making it ideal for portable, battery-powered audio and telephony applications.

The record path of the TLV320AIC31 contains integrated microphone bias, a digitally-controlled stereo microphone pre-amp, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. The playback path includes mix/mux capability from the stereo DAC and selected inputs, through programmable volume controls to the various outputs.

The TLV320AIC31 contains four high-power output drivers as well as two fully differential output drivers. The high-power output drivers are capable of driving a variety of load configurations, including up to four channels of single-ended, 16- speakers in a BTL configuration at 500 mW per channel.

The stereo audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering in the DAC path for 3D, bass/treble/midrange effects, speaker equalization, and de-emphasis for 32-kHz, 44.1-kHz, and 48-kHz rates. The stereo-audio analog-to-digital converter (ADC) supports sampling rates from 8 kHz to 96 kHz and is preceded by programmable gain amplifiers providing up to +59.5 dB analog gain for low-level microphone inputs.

The serial control bus supports the I2C protocol, while the serial-audio data bus is programmable for I2S, left-/right-justified, DSP, or TDM modes. A highly programmable PLL is included for flexible clock generation and support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, with special attention paid to the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320AIC31 operates from an analog supply of 2.7 V to 3.6 V, a digital core supply of 1.65 V to 1.95 V, and a digital I/O supply of 1.1 V to 3.6 V. The device is available in a 5 × 5 mm, 32-lead QFN package.

The TLV320AIC31 is a low-power stereo audio codec with a stereo headphone amplifier, as well as multiple inputs and outputs, programmable in single-ended or fully-differential configurations. Extensive register-based power control is included, enabling stereo 48-kHz digital-to-analog converter (DAC) playback as low as 14 mW from a 3.3-V analog supply, making it ideal for portable, battery-powered audio and telephony applications.

The record path of the TLV320AIC31 contains integrated microphone bias, a digitally-controlled stereo microphone pre-amp, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. The playback path includes mix/mux capability from the stereo DAC and selected inputs, through programmable volume controls to the various outputs.

The TLV320AIC31 contains four high-power output drivers as well as two fully differential output drivers. The high-power output drivers are capable of driving a variety of load configurations, including up to four channels of single-ended, 16- speakers in a BTL configuration at 500 mW per channel.

The stereo audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering in the DAC path for 3D, bass/treble/midrange effects, speaker equalization, and de-emphasis for 32-kHz, 44.1-kHz, and 48-kHz rates. The stereo-audio analog-to-digital converter (ADC) supports sampling rates from 8 kHz to 96 kHz and is preceded by programmable gain amplifiers providing up to +59.5 dB analog gain for low-level microphone inputs.

The serial control bus supports the I2C protocol, while the serial-audio data bus is programmable for I2S, left-/right-justified, DSP, or TDM modes. A highly programmable PLL is included for flexible clock generation and support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, with special attention paid to the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320AIC31 operates from an analog supply of 2.7 V to 3.6 V, a digital core supply of 1.65 V to 1.95 V, and a digital I/O supply of 1.1 V to 3.6 V. The device is available in a 5 × 5 mm, 32-lead QFN package.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと類似の機能
TLV320AIC3101 アクティブ 低消費電力ステレオ・コーデック、6 入力、6 出力、スピーカ/ヘッドフォン・アンプ、エンハンスド・デジタル・エフェクト Pin-to-pin and software compatible, includes additional fiters in the ADC path.
TLV320AIC3104 アクティブ 低消費電力ステレオ・コーデック、6 入力、6 出力、ヘッドフォン・アンプ、エンハンスド・デジタル・エフェクト Pin-to-pin and software compatible, includes additional fiters in the ADC path, without speaker amplifier

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
9 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート Low Power Stereo Audio Codec for Portable Audio/Telephony データシート (Rev. C) 2008年 11月 12日
アプリケーション・ノート Out-of-Band Noise Measurement Issues for Audio Devices (Rev. A) 2019年 12月 31日
アプリケーション・ノート Audio Serial Interface Configurations for Audio Codecs (Rev. A) 2019年 6月 27日
アプリケーション・ノート Audio Serial Interface Configurations for Audio Codecs 2010年 9月 22日
アプリケーション・ノート Interfacing an I2S Device to an MSP430 Device (Rev. A) 2010年 3月 22日
アプリケーション・ノート Configuring I2S to Generate BCLK from Codec Devices & WCLK from McBSP Port 2009年 7月 8日
アプリケーション・ノート Using TLV320AIC3x Digital Audio Data Serial Interface w/TDM Support 2006年 7月 5日
EVM ユーザー ガイド (英語) TLV320AIC31EVM - User Guide 2005年 11月 18日
アプリケーション・ノート TLV320AIC3x WinCE 5.0 Drivers 2005年 9月 27日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

ドライバまたはライブラリ

TLV320AIC3XSW-LINUX — TLV320AIC3X 向け Linux ドライバ

この Linux ドライバは、低消費電力ステレオ・コーデックである TLV320AIC3x ファミリをサポートし、I2C バス経由の通信を実施するほか、Linux DAPM (Dynamic Audio Power Management for Portable Devices、ポータブル・デバイス向けのダイナミック・オーディオ・パワー・マネージメント) クラスとのインターフェイスとして機能します。
Linux のメインライン・ステータス

Linux メインラインで利用可能か:はい
git.ti.com から入手可能か:N/A

Linux ソース・ファイル

このデバイスに関連付けられているファイル:

  1. (...)
シミュレーション・モデル

TLV320AIC31 IBIS Model

SLAM113.ZIP (86 KB) - IBIS Model
計算ツール

COEFFICIENT-CALC Coefficient Calculator For Digital Biquad Filters

COEFFICIENT-CALC (TIBQ) calculates the coefficients for the digital filter biquad transfer function implemented in TI audio codecs. The characteristics of the digital filter are adjusted by selecting a filter type and moving a control point within a window that shows the transfer function gain and (...)

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
オーディオ・コーデック
TLV320AIC26 HP (ヘッドホン) / スピーカ・アンプと 12 ビット測定 ADC 搭載、低消費電力、モノラル ADC とステレオ DAC TLV320AIC28 6 個のオーディオ入力と HP (ヘッドホン) / スピーカ・アンプ搭載、低消費電力、モノラル ADC とステレオ DAC TLV320AIC29 6 個のオーディオ入力と HP (ヘッドホン) / スピーカ・アンプ搭載、低消費電力、モノラル ADC とステレオ DAC TLV320AIC3007 低消費電力ステレオ・コーデック、統合 Class-D アンプ付 TLV320AIC31 6 入力、6 出力、ヘッドホン / スピーカ・アンプと 3D エフェクト内蔵、低消費電力、ステレオ・コーデック TLV320AIC3100 低消費電力オーディオ・コーデック、オーディオ・プロセッシングおよびモノラル Class-D アンプ内蔵 TLV320AIC3101 低消費電力ステレオ・コーデック、6 入力、6 出力、スピーカ/ヘッドフォン・アンプ、エンハンスド・デジタル・エフェクト TLV320AIC3104 低消費電力ステレオ・コーデック、6 入力、6 出力、ヘッドフォン・アンプ、エンハンスド・デジタル・エフェクト TLV320AIC3105 低消費電力ステレオ・コーデック、6 入力、6 出力、ヘッドフォン・アンプ、エンハンスド・デジタル・エフェクト TLV320AIC3106 10 入力、7 出力、ヘッドホン・アンプ、エンハンスド・デジタル・エフェクト機能搭載、低消費電力ステレオ・コーデック TLV320AIC3107 低消費電力ステレオ・コーデック、統合モノラル Class-D アンプ付 TLV320AIC3110 低消費電力オーディオ・コーデック、1.3W ステレオ、Class-D スピーカ・アンプ付 TLV320AIC3111 低消費電力オーディオ・コーデック、組込み miniDSP/ステレオ Class-D スピーカ・アンプ内蔵 TLV320AIC3120 低消費電力オーディオ・コーデック、miniDSP / 2.5W モノラル Class-D スピーカ・アンプ搭載 TLV320AIC32 6 入力、6 出力、HP (ヘッドホン) / スピーカ・アンプと 3D エフェクト搭載、低消費電力、ステレオ・コーデック TLV320AIC3204 PowerTune™ テクノロジー採用、超低消費電力、ステレオ オーディオ コーデック TLV320AIC3206 DirectPath™ HP (ヘッドホン) アンプ搭載、超低消費電力、ステレオ コーデック TLV320AIC3254 超低消費電力ステレオ・オーディオ・コーデック、プログラマブル miniDSP 付き TLV320AIC3256 miniDSP と DirectPath™ HP (ヘッドホン) アンプ搭載、超低消費電力、ステレオ コーデック TLV320AIC33 低消費電力 ステレオ CODEC、10 入力、7 出力、ヘッドフォン/スピーカ・アンプ、およびエンハンスド・デジタル・エフェクト TLV320AIC34 低消費電力、4 チャネル・コーデック TSC2100 ステレオ DAC / モノラル ADC と HP (ヘッドホン) / スピーカ・アンプ搭載、4 線式タッチ・スクリーン・コントローラ TSC2101 ステレオ DAC / モノラル ADC と HP (ヘッドホン) / スピーカ・アンプ搭載、4 線式タッチ・スクリーン・コントローラ TSC2102 ステレオ DAC と HP (ヘッドホン) アンプ搭載、4 線式タッチ・スクリーン・コントローラ TSC2117 4 線式タッチスクリーン・コントローラ、低消費電力モノラル ADC/ステレオ DAC TSC2301 ステレオ・コーデックとヘッドホン・アンプ搭載、4 線式タッチ・スクリーン・コントローラ (キーパッド対応機能内蔵、6 GPIO 搭載)
オーディオ ADC
TLV320ADC3001 92dB SNR、低消費電力ステレオ ADC(ADC3001) TLV320ADC3101 デジタル・マイク・サポートと miniDSP を搭載した 92dB SNR 低消費電力ステレオ ADC
スピーカ・アンプ
TAS2505 オーディオ処理およびモノ・ヘッドフォン・アンプ付き、2W、モノラル、デジタル / アナログ入力 Class-D オーディオ・アンプ TAS2505-Q1 車載対応、オーディオ処理機能搭載、2W、モノラル、デジタルまたはアナログ入力 Class-D アンプ TAS2521 miniDSP、18-mW、モノラル・ヘッドホン・ドライバ搭載、2W、モノラル、デジタル / アナログ入力 Class-D オーディオ・アンプ
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ ピン数 ダウンロード
VQFN (RHB) 32 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ