TPS62133A-Q1
- DCS-Control™ topology
- Qualified for automotive applications
- Functional
Safety-Capable
- Documentation available to aid functional safety system design
- AEC-Q100 qualified with the following
results:
- Device temperature grade: –40°C to 125°C operating junction temperature range
- Device HBM ESD classification level 2
- Device CDM ESD classification level C4B
- Input voltage range: 3 to 17 V
- Adjustable output voltage from 0.9 to 6 V
- Pin-selectable output voltage (nominal, + 5%)
- Programmable soft start and tracking
- Seamless power save mode transition
- Quiescent current of 17 µA (typ.)
- Selectable operating frequency
- Power good output
- 100% Duty cycle mode
- Short circuit protection
- Overtemperature protection
- Pin-to-pin compatible with TPS62150A-Q1
- Available in a 3-mm × 3-mm, VQFN-16 package
- Create a custom design using the TPS62130A-Q1 with the WEBENCH® Power Designer
The TPS6213XA-Q1 devices are easy-to-use synchronous step-down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response as well as high output-voltage accuracy through the use of the DCS-Control™ topology.
With a wide operating input-voltage range of 3 to 17 V, the devices are ideally suited for systems powered from intermediate bus power rails. The devices support up to 3-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode). The output-voltage startup ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable and open-drain power-good pins.
In power save mode, the devices show quiescent current of about 17 µA from VIN. Power save mode which is entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the devices are turned off and shutdown current consumption is less than 2 µA. The devices are packaged in a 16-pin VQFN package measuring 3 × 3 mm (RGT).
お客様が関心を持ちそうな類似品
比較対象デバイスと同等の機能で、ピン互換製品。
技術資料
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| * | データシート | TPS6213xA-Q1 3-V to 17-V 3-A Step-Down Converter With DCS Control データシート (Rev. E) | 2020/05/26 | |||
| アプリケーション・ノート | Comparison of TPS629xx-Q1 vs. TPS621x0A-Q1 | PDF | HTML | 2022/12/13 | |||
| 機能安全情報 | TPS6213x-Q1 Functional Safety FIT and Failure Mode Distribution | 2020/01/27 | ||||
| アナログ デザイン ジャーナル | Understanding 100% mode in low-power DC/DC converters | 2018/06/22 | ||||
| アナログ デザイン ジャーナル | Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold | 2017/10/24 | ||||
| アナログ デザイン ジャーナル | Testing tips for applying external power to supply outputs without an input voltage | 2016/10/24 | ||||
| アナログ デザイン ジャーナル | Understanding frequency variation in the DCS-Control(TM) topology | 2015/10/30 | ||||
| アナログ デザイン ジャーナル | Five steps to a great PCB layout for a step-down converter | 2015/01/29 | ||||
| アプリケーション・ノート | Step-Down Converter With Input Overvoltage Protection | 2014/09/04 | ||||
| アプリケーション・ノート | Step-Down Converter with Cable Voltage Drop Compensation | 2014/06/26 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
TPS62130EVM-505 — Evaluation Module for TPS62130 a 3-A, synchronous, step-down converter in a 3x3-mm, 16-pin QFN
- Related Terms:
- Synchronous Step Down DC-DC Converter
- DC to DC Step Down Converter
- Buck DC DC Converter
The TPS62130EVM-505 (HPA505-001) uses the TPS62130 adjustable version and is set to a 3.3-Voutput. The EVM operates with full-rated performance with an input voltage between 3.7 V and 17 V. (...)
TIDA-00271 — リモート カメラおよびレーダー モジュール用の ADAS センサ インターコネクト リファレンス デザイン ボード
ADAS センサ インターコネクト ボードは、カメラ、LIDAR、レーダー モジュールのようなリモート センサを集中処理用 ECU に接続する必要のあるアプリケーションを想定しています。このボードは、最大 3 系統の同軸ケーブル入力および 1 系統の LVDS ツイスト ペア入力に対応しており、処理 ECU 向けのデータ出力として、3 本の FMC ケーブルおよび 1 つの基板間コネクタをサポートします。 同軸コネクタ (SMB 規格) を介して接続されたカメラまたはその他のセンサモジュールには、インターコネクトボードから同軸ケーブル経由 (power over coax) (...)
TIDA-01412 — ゲートウェイおよびボディ コントロール モジュールの車載マイクロコントローラ用電源のリファレンス デザイン
このリファレンス デザインはディスクリート電源であり、Freescale™ MPC5748G マイコンの性能を示します。このリファレンス デザインは、5 個の DC/DC コンバータのみを使用し、PMIC を使用する場合よりフレキシビリティとスケーラブルな設計を提供します。ゲートウェイや中央のボディ コントロール モジュールなど、各種の車載用アプリケーションに対応しています。
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| VQFN (RGT) | 16 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。