TPS627451
- Input Voltage Range VIN from 3.3 V to 10 V
- Typical 400 nA Quiescent Current
- Up to 90% efficiency with load currents >15 µA
- Up to 300 mA Output Current
- RF Friendly DCS-Control™
- Low Output Ripple Voltage
- 16 Selectable Output Voltages from
- 1.8 V to 3.3 V (TPS62745)
- 1.3 V to 2.8 V (TPS627451)
- Integrated input voltage switch
- Integrated Discharge Function at VOUT
- Open Drain Power Good Output
- Operates with a Tiny 3.3 µH or 4.7 µH Inductor
- Small 3 mm × 2 mm WSON Package
The TPS62745 is a high efficiency ultra low power synchronous step down converter optimized for low power wireless applications. It provides a regulated output voltage consuming only 400-nA quiescent current. The device operates from two rechargeable Li-Ion batteries, Li-primary battery chemistries such as Li-SOCl2, Li-SO2, Li-MnO2 or four to six cell alkaline batteries. The input voltage range up to 10 V allows also operation from a USB port and thin-film solar modules. The output voltage is set with four VSEL pins between 1.8 V and 3.3 V for TPS62745 or 1.3 V and 2.8 V for TPS627451. TPS62745 features low output ripple voltage and low noise with a small output capacitor. An internal input voltage switch controlled by pin EN_VIN_SW connects the supply voltage to pin VIN_SW. The switch is intended to be used for an external voltage divider, scaling down the input voltage for an external ADC. The switch is automatically opened when the supply voltage is below the undervoltage lockout threshold. The TPS62745 is available in a small 12 pin 3 mm × 2 mm WSON package.
技術資料
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| * | データシート | TPS62745 Dual-cell Ultra Low IQ Step Down Converter for Low Power Wireless Applications データシート (Rev. A) | PDF | HTML | 2015/06/10 | ||
| ホワイト・ペーパー | Extending Battery Life in Smart E-Locks (Rev. A) | 2020/06/04 | ||||
| ホワイト・ペーパー | Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies | 2019/10/14 | ||||
| アナログ デザイン ジャーナル | Methods of output-voltage adjustment for DC/DC converters | 2019/06/14 | ||||
| アナログ デザイン ジャーナル | Understanding 100% mode in low-power DC/DC converters | 2018/06/22 | ||||
| アナログ デザイン ジャーナル | Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold | 2017/10/24 | ||||
| アナログ デザイン ジャーナル | Testing tips for applying external power to supply outputs without an input voltage | 2016/10/24 | ||||
| アナログ デザイン ジャーナル | Understanding frequency variation in the DCS-Control(TM) topology | 2015/10/30 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
TPS62745EVM-622 — 超低静止電流、ワイド入力対応降圧コンバータ評価基板
この TPS62745EVM-622 を使用すると、TPS62745 の動作や機能の評価とテストを容易に実行できる設計を採用しています。この評価基板は、3.3V ~10V の入力電圧を、最大 300mA で 1.8V ~ 3.3V に設定されたレギュレーション済み出力に変換します。また、TPS62745 には入力電圧スイッチも内蔵されており、VIN_SW ピンを入力から接続 / 切断できます。TPS627450 は、静止電流が 500nA と非常に低くなっています。
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| WSON (DSS) | 12 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。