UC1525B-SP

アクティブ

宇宙グレード QMLV、35V、デュアル 0.4A、400kHz PWM コントローラ

製品詳細

Topology Flyback, Forward, Full-Bridge, Half-Bridge, Push-Pull Duty cycle (Max) (%) 49 Supply voltage (Max) (V) 8 UVLO thresholds on/off (V) 7/6.8 Features Error Ampilifer, Soft Start, SYNC Pin Operating temperature range (C) -55 to 125 Rating Space Frequency (Max) (kHz) 400 Gate drive (Typ) (A) 0.4
Topology Flyback, Forward, Full-Bridge, Half-Bridge, Push-Pull Duty cycle (Max) (%) 49 Supply voltage (Max) (V) 8 UVLO thresholds on/off (V) 7/6.8 Features Error Ampilifer, Soft Start, SYNC Pin Operating temperature range (C) -55 to 125 Rating Space Frequency (Max) (kHz) 400 Gate drive (Typ) (A) 0.4
CDIP (J) 16 135 mm² 19.65 x 6.92 LCCC (FK) 20 79 mm² 8.89 x 8.89
  • QML-V Qualified, SMD 5962-89511
  • Rad-Tolerant: 30 kRad (Si) TID(1)
  • 8-V to 35-V Operation
  • 5.1-V Buried Zener Reference Trimmed to ±0.75%
  • 100-Hz to 400-kHz Oscillator Range
  • Separate Oscillator Sync Terminal
  • Adjustable Deadtime Control
  • Internal Soft Start
  • Pulse-by-Pulse Shutdown
  • Input Undervoltage Lockout With Hysteresis
  • Latching PWM to Prevent Multiple Pulses
  • Dual Source/Sink Output Drivers
  • Low Cross Conduction Output Stage
  • Tighter Reference Specifications

(1) Radiation tolerance is a typical value based upon initial device qualification with dose rate = 10 mrad/sec. Radiation Lot Acceptance Testing is available - contact factory for details.

  • QML-V Qualified, SMD 5962-89511
  • Rad-Tolerant: 30 kRad (Si) TID(1)
  • 8-V to 35-V Operation
  • 5.1-V Buried Zener Reference Trimmed to ±0.75%
  • 100-Hz to 400-kHz Oscillator Range
  • Separate Oscillator Sync Terminal
  • Adjustable Deadtime Control
  • Internal Soft Start
  • Pulse-by-Pulse Shutdown
  • Input Undervoltage Lockout With Hysteresis
  • Latching PWM to Prevent Multiple Pulses
  • Dual Source/Sink Output Drivers
  • Low Cross Conduction Output Stage
  • Tighter Reference Specifications

(1) Radiation tolerance is a typical value based upon initial device qualification with dose rate = 10 mrad/sec. Radiation Lot Acceptance Testing is available - contact factory for details.

The UC1525B pulse width modulator integrated circuit is designed to offer improved performance and lowered external parts count when used in designing all types of switching power supplies. The on-chip 5.1-V buried zener reference is trimmed to ±0.75%, and the input common-mode range of the error amplifier includes the reference voltage, eliminating external resistors. A sync input to the oscillator allows multiple units to be slaved or a single unit to be synchronized to an external system clock. A single resistor between the CT and the discharge terminals provide a wide range of dead-time adjustment. These devices also feature built-in soft-start circuitry with only an external timing capacitor required. A shutdown terminal controls both the soft-start circuitry and the output stages, providing instantaneous turn off through the PWM latch with pulsed shutdown, as well as soft-start recycle with longer shutdown commands. These functions are also controlled by an undervoltage lockout which keeps the outputs off and the soft-start capacitor discharged for sub-normal input voltages. This lockout circuitry includes approximately 500 mV of hysteresis for jitter-free operation. Another feature of these PWM circuits is a latch following the comparator. Once a PWM pulse has been terminated for any reason, the outputs remain off for the duration of the period. The latch is reset with each clock pulse. The output stages are totem-pole designs capable of sourcing or sinking in excess of 200 mA. The UC1525B output stage features NOR logic, giving a LOW output for an OFF state.

The UC1525B pulse width modulator integrated circuit is designed to offer improved performance and lowered external parts count when used in designing all types of switching power supplies. The on-chip 5.1-V buried zener reference is trimmed to ±0.75%, and the input common-mode range of the error amplifier includes the reference voltage, eliminating external resistors. A sync input to the oscillator allows multiple units to be slaved or a single unit to be synchronized to an external system clock. A single resistor between the CT and the discharge terminals provide a wide range of dead-time adjustment. These devices also feature built-in soft-start circuitry with only an external timing capacitor required. A shutdown terminal controls both the soft-start circuitry and the output stages, providing instantaneous turn off through the PWM latch with pulsed shutdown, as well as soft-start recycle with longer shutdown commands. These functions are also controlled by an undervoltage lockout which keeps the outputs off and the soft-start capacitor discharged for sub-normal input voltages. This lockout circuitry includes approximately 500 mV of hysteresis for jitter-free operation. Another feature of these PWM circuits is a latch following the comparator. Once a PWM pulse has been terminated for any reason, the outputs remain off for the duration of the period. The latch is reset with each clock pulse. The output stages are totem-pole designs capable of sourcing or sinking in excess of 200 mA. The UC1525B output stage features NOR logic, giving a LOW output for an OFF state.

ダウンロード

お客様が関心を持ちそうな類似製品

open-in-new 製品の比較
比較対象デバイスと類似の機能。
NEW TPS7H5001-SP アクティブ 耐放射線特性 QMLV、同期整流機能搭載、2MHz、デュアル出力 PWM コントローラ A full-featured, dual-output Radhard by design PWM controller, including dual-synchronous rectification outputs with TID, SEE and NDD radiation reports.
UC1825B-SP アクティブ 耐放射線特性 QMLV、30V 入力、2A、デュアル出力、1MHz PWM コントローラ A dual-output PWM controller with improved 100krad(Si) TID performance, SEE immune to 75MeV.cm2/mg with NDSEE and NDD test results.

技術資料

star = TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアして、もう一度検索を行ってください。
10 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート Regulating Pulse Width Modulators データシート 2009年 1月 16日
* SMD UC1525B-SP SMD 5962-89511 2016年 7月 8日
* 放射線と信頼性レポート UC1525B-SP Radiation Test Report 2015年 5月 8日
セレクション・ガイド TI Space Products (Rev. I) 2022年 3月 3日
アプリケーション・ノート TPS7H3301-SP DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers FAQ 2020年 8月 21日
アプリケーション・ノート Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim & Form PDF | HTML 2020年 5月 18日
アプリケーション・ノート Heavy Ion Orbital Environment Single-Event Effects Estimations 2020年 5月 18日
アプリケーション・ノート Single-Event Effects Confidence Interval Calculations 2020年 1月 14日
その他の技術資料 TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing 2019年 6月 17日
e-Book(PDF) Radiation Handbook for Electronics (Rev. A) 2019年 5月 21日

設計および開発

追加の事項や他のリソースを参照するには、以下のタイトルをクリックすると、詳細ページを表示できます。

パッケージ ピン数 ダウンロード
CDIP (J) 16 オプションの表示
LCCC (FK) 20 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL rating / リフローピーク温度
  • MTBF/FIT 推定値
  • 原材料組成
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果

サポートとトレーニング

TI E2E™ Forums (英語) では、TI のエンジニアからの技術サポートが活用できます

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ